92' si h22a vtec wire-up?
#1
92' si h22a vtec wire-up?
So every thread i've checked is useless to my cause. Need help with tryin to find out how to wire it in since my car was never pre-wired to begin with. Any help would be great! Pictures would be even better!
#3
Re: 92' si h22a vtec wire-up?
You will pop open the back of the ecu connectors and slide the pins in fully and then just close it up and you're done.
You can get a kit from axidworks. Just google his name.
You can get a kit from axidworks. Just google his name.
#4
Re: 92' si h22a vtec wire-up?
http://hondaswap.com/threads/how-to-wire-vtec.40811/
hope this helps, its just 2 wires one is a ground and one goes to ecu.
phearable.net has some great info also. hope this helps. I can go back and look at mine if youneed me to, 4ws models are not pre-wired ether, olny plain si's '93 up.
hope this helps, its just 2 wires one is a ground and one goes to ecu.
phearable.net has some great info also. hope this helps. I can go back and look at mine if youneed me to, 4ws models are not pre-wired ether, olny plain si's '93 up.
Thread
Thread Starter
Forum
Replies
Last Post