civicboy07

Well here we go again. last build lasted me 50 miles from one of the sleeves dropping, The company did cover the sleeves and did a new block. So it's all apart and pretty much decided to change a lot again. Ditching the eagle rods, wiseco's, single disk clutch, and the arp head studs. Also decided to go with a gsr block this time.

Here is the build so far,

B18c1 block with LA pro cool sleeves
O ringed
Cp 10:1 compression pistons
Manley turbo tuff rods
Hd wrist pins
Arp main studs
Speedfactory L19 head studs
Itr oil pump
Je pro seal head gasket
Acl race hx bearings

B16 head
Port n polished
Super tech 85lb valve springs, retainers, and valves
Pro1 cams with Golden eagle cam gears
Skunk2 lma's
Ported Victor x intake
76mm blox throttle body
Endyn cam tensioner

Fuel system
Fic2150cc injectors
255 intank with inline a1000 pump
-10 feed line
-6 return line
Edlebrock Fuel rail
A1000 fpr

Tuning and igntion system
Aem ems 1040
Rsk coils
Aem epm
Rywire cop harness
Rywire cop plate

Turbo setup
Carberry built forward facing t4 twin scroll manifold
S366 turbo with divided t4 1.10 housing
Mvr 44mm wastegates
Precision 825hp intercooler
Tial bov
Carberry built 3" charge pipe
Bwr catch can setup
Speedfactory 4 bar map sensor

Drivetrain
Gsr transmission
cnc werks 5th gear cuff
Competition clutch twin disk type c
Drive shaft shop 5.9 axles

Suspension
Skunk2 pro s ll coilovers 10k fronts 18k rears
Function7 rear control arms
Ktuned traction bar
Energy suspension bushings

Brake setup
Wilwood master cylinder with chase bays mounting plate.
Finishing lines sfwd brake line kit
Gsr front brake setup
Goodwridge G-stop ss brake hose
Staging brake on rear brakes


New block. Shop has great turn around time and customer service






I was also able to score a deal on a new set of seats.



Also got a staging brake installed




I'll keep pictures coming as the build comes together. Trying to have it back together soon.

Keo00civic

iTrader: (1)

Nice!

$MIKE$

iTrader: (13)

9 seconds ???

civicboy07

Yea that's what my goal is. But also want to see what I can do with the m&h radials before slicks

Mach1n1st

**** looks dope pleasure taking care of the block for you. If you need anything you can text me 5405320246.

civicboy07

Thanks a lot for doing it and getting it done fast. She should make some power now.

civicboy07

Thanks 👍

CRUZ131313

nice how much hp?

civicboy07

Shooting for around 700-800whp

CRUZ131313

ooo dam nice

CRUZ131313

what kind of crankshaft did you use?

civicboy07

I'm using a b18b1 crank with ls length rods

civicboy07

decided to go ahead and do a brake booster delete and tuck the brake lines.
Before

And after

Also got some stuff from speed factory in.

ckrs_civic

iTrader: (4)

very nice.

lmalloy

Looks good

civicboy07

Thanks, motor should be done this week and hopefully in by the weekend. Was able to go pick up a set of dss 5.9 axles yesterday for a killer deal

civicboy07

Finally got the block back from being machined and cleaned. Looks brand new now. I'm still waiting on the head to be finished, but should be done by this weekend. Carberry and me got started on getting the bottom end assembled and ready to go





Upgraded cp pins next to the standard cp pins




We were able to get the crank in and double check clearances with plastigauge, but the shop did order wrong rod bearings so waiting on those now to finish up.

civicboy07

Got the head back today. Decided to go with ferrea super alloy valves. Looking brand new now though 😎






Now we are just fighting with getting proper rod bearing clearances. Once we can get that figured out, the motor could go together and go in the car.

civicboy07

We got a lot done last night and was able to get the motor in and running



Valve cover still needs powder coated



And it's in

SiRCiviC94

nice work

Steeve_Civic

Very Nice! Which fuel are you running?

civicboy07

Thanks

civicboy07

Thanks, it's on pump e85 still

$MIKE$

iTrader: (13)

In for dyno # 👍

civicboy07

Made some progress today. Jason got the car running great and smooth and street tuned on 20psi for now. Should be on the dyno next week 😁





Still have to get some supports made for the wing