Help?????Hybrid Racing Unibody FPR Issue
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2011
Location: somewhere in the great state
Posts: 283
Likes: 0
Received 1 Like
on
1 Post
Help?????Hybrid Racing Unibody FPR Issue
So I have Installed a Hybrid racing tucked fuel kit on my fresh Integra K-swap build. For some reason the brand new Fuel Pressure Regulator does not adjust under 70psi no matter how many times I turn the adjustment screw it stays at 70 psi when started. I have one fuel feed line going to the regulator and one going out of the regulator to the center port on the rail. Another line going out of the bottom of the regulator to the middle return tube. I am running a walbro 255. Please help I have called Hybrid and they want me to send it in and wait two weeks for it to come back. I dont have time for that.
#2
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: ca
Posts: 2,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help?????Hybrid Racing Unibody FPR Issue
are you adjusting it with the vacuum line connected or disconnected? when i adjusted my base fuel pressure with my aeromotive, i disconnected the vacuum line and adjusted to desire pressure and put the vac line back on
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2011
Location: somewhere in the great state
Posts: 283
Likes: 0
Received 1 Like
on
1 Post
Re: Help?????Hybrid Racing Unibody FPR Issue
I was told by the Hybrid Racing Tech that there is no need for me to run a vacuum line to it. That is primarily for boosted cars and I am High comp NA.
Thread
Thread Starter
Forum
Replies
Last Post