1990 db1 gs teggy build
#1
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
1990 db1 gs teggy build
here's my 89/90 db1 project
*some stuff will be sold or traded*
anyhow here's when i 1st got it ...
vis Kevlar light wight carbon fiber hood {partial trade for oem blk gloss hood with $200}
s2k suspensions {sell or trade}
antenna delete plug {free when i a e46 vert short stub antenna}
jdm rain visors
jdm headlights
jdm cluster
gsr seats
15x8 apache2's {trade for deepdish 16s or 17s}
aftermarket front lip
cross drilled rotors
intake
p28 chipped hondadata ecu
aem wide band
headers
cams
stage 3 clutch
magna core spark cables
b20/b16 swap
race engine mounts
short shifter
jdm signals with diy city lights {$20 with your stock clears}
*some stuff will be sold or traded*
anyhow here's when i 1st got it ...
vis Kevlar light wight carbon fiber hood {partial trade for oem blk gloss hood with $200}
s2k suspensions {sell or trade}
antenna delete plug {free when i a e46 vert short stub antenna}
jdm rain visors
jdm headlights
jdm cluster
gsr seats
15x8 apache2's {trade for deepdish 16s or 17s}
aftermarket front lip
cross drilled rotors
intake
p28 chipped hondadata ecu
aem wide band
headers
cams
stage 3 clutch
magna core spark cables
b20/b16 swap
race engine mounts
short shifter
jdm signals with diy city lights {$20 with your stock clears}
Last edited by evan221; 04-23-2014 at 10:54 PM.
#2
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
then started under the hood . washing/cleaning up the wires and left over a/c and power steering pipping. still in the process of painting and polishing. should be done with the bay hopefully this weekend
#3
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
then gutted the trunk and cabin carpets for full washing and fixed my leaking blower unit and started to clean up the wiring and sound proofing the car..
have to wait on material from my local home depot to finish the floor
meantime i will paint the trunk floor and put the carpet trunk carpet back in
i redid my other cluster. just need to order some blue led bulbs to match my pioneer
and have a pair of rare recaros that will go in after i find a d.i.y to install them with stock rails.
have to wait on material from my local home depot to finish the floor
meantime i will paint the trunk floor and put the carpet trunk carpet back in
i redid my other cluster. just need to order some blue led bulbs to match my pioneer
and have a pair of rare recaros that will go in after i find a d.i.y to install them with stock rails.
Last edited by evan221; 04-23-2014 at 11:07 PM.
#5
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
thanks finished the floors and did a quick mockup. looks like i will be dyeing the carpet black this week
#7
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
thanks its getting there. just waiting on some sandpaper and paint and to finish the engine bay and get the car back in my garage.
meantime im in the process of blk housing my jdm 1pc and clearing up the lenses
meantime im in the process of blk housing my jdm 1pc and clearing up the lenses
Trending Topics
#9
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
thanks was to windy yesterday to get any paint work done. so i did some cleaning on my bmw and started doing my jdm lights.
started with the drivers side. going the transparent yellow the fog part and blackout the bezal frames before i seal them back.
passenger side i have to find another yellow bulb capsule
started with the drivers side. going the transparent yellow the fog part and blackout the bezal frames before i seal them back.
passenger side i have to find another yellow bulb capsule
#10
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
update... nothing much really ...but its getting there
i still have to order
spark plug cover
chrome headers
polish radiator
polish strut bar
hopefully i can get all the polishing done this week and lay down the real dark black paint.
does anyone knows where i can find those silver mesh radiator hose covers?
i still have to order
spark plug cover
chrome headers
polish radiator
polish strut bar
hopefully i can get all the polishing done this week and lay down the real dark black paint.
does anyone knows where i can find those silver mesh radiator hose covers?
#11
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
trunk painted carpet pieces washed and reinstalled
also resealed the taillights
also resealed the taillights
Last edited by evan221; 07-22-2014 at 07:42 AM.
#15
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
there's no real car that there out of. they are just rare recaro lxc bucket seats. might be for sale if i find a mint set of db1 sedan black leather front/rear seats with armrest
#22
Honda-Tech Member
Re: 1990 db1 gs teggy build
Nice car man. Was gonna do one of these or a crx when I started my build. Ended up with the crx. Would love to see you fill those wheel wells with a little more low and/or more tire. Also see that bay all cleaned up. Keep it up.
#23
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2008
Location: queens/longisland, ny, usa
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1990 db1 gs teggy build
thanks getting there i have coilovers for the car just waiting to find a set of 16x8 or 17x8's
as far as engine bay i will be removing the cruise control and the abs crap and the condenser. will be changing the rad and fan and headers.
as far as engine bay i will be removing the cruise control and the abs crap and the condenser. will be changing the rad and fan and headers.