Asmooh

Can someone please help me with the following:

I need a high quality picture of the Civic Coupe DX / DXi engine bay without the engine in it.

But... this car should not have

- Airco
- Power steering


I need to know which lines are ment for the power steering because i'm going to remove the power steering and I want it as the original DX / DXi without all those options.


To compare what i have 'extra' I need a super high, big picture.


Thanks

NerfGunner420

lol just shave what you don't need/want.

Asmooh

haha it doesnt work that way

B_Swapped93

how hard is it to google tucked civic bay or more simply trace the lines/mark them then remove them.

Asmooh

But i did not ask for shaved bay?

I asked for an ORIGINAL bay but with no PS, Airco because in the US thats default..

cetcivic

Always glad to help
Your welcome very much

78F350

Here's another post that isn't what you asked for:
Link to PS lines: HondaPartsNow

The PS pump has 2 rubber hoses, pressure and return. Remove those and follow them removing everything else connected to them 'till you get to the steering rack. Loop the connection from the pressure to the return at the rack (easy) or just get a manual rack (lots of work).

Googled a DIY just for fun... CivicForums

Asmooh

I want to get the manual rack, thats why I want to delete all the lines i Don't need anymore.

Why is the manual rack so much extra work Isnt that just swap the PS one with everything connected out.. and the manual back in?

78F350

Putting in the manual rack isn't that difficult, but it is a lot more work than just looping the lines. Putting in the manual rack IS the right way to do it. Other than just swapping out the parts, you should get an alignment after its all together.

B_Swapped93

just loop the lines you're making it more complicated then it is.