94? Accord Project
#352
Honda-Tech Member
Thread Starter
#353
Honda-Tech Member
Thread Starter
Re: 94? Accord Project
So I was playing with my foglights today. I knew I had to do something about this terrible looking paint
Also I had to resolder everything because the last person thought it would be a good idea to cut them all over
They turned out pretty good. The camera glare kinda ruins it but oh well. I'll have better pics when I get everything put back together. I'm gonna tint the glass also but I haven't decided on a color yet
Also I had to resolder everything because the last person thought it would be a good idea to cut them all over
They turned out pretty good. The camera glare kinda ruins it but oh well. I'll have better pics when I get everything put back together. I'm gonna tint the glass also but I haven't decided on a color yet
#354
Honda-Tech Member
Join Date: Nov 2012
Location: central ohio
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Re: 94? Accord Project
The ecu tells the injectors when to complete the circuit and fire. perhaps your ecu could be bad or you may have very corroded wires or connectors at ecu. maybe try a known working ecu. Also you can test for continuity at the injector plug while someone cranks it over. If there is none then you know the ecu could be the culprit.
does the car have a sunroof? I only ask because I had a clogged drain in my cb9 and water found its way onto the passenger side floorboard thus corroding wire connections to the point of then falling apart rendering my clock, radio and a couple other things useless. worth a look.
test injector resistance. should be between 1.5 and 2.5 ohms.
check for blown fuses related to injection system
check all your grounds and make sure they are tight.
if you can source a noid light, you can plug the injector connector into that but like I said before if you have a multimeter you can just check for continuity while someone is cranking it over.
does the car have a sunroof? I only ask because I had a clogged drain in my cb9 and water found its way onto the passenger side floorboard thus corroding wire connections to the point of then falling apart rendering my clock, radio and a couple other things useless. worth a look.
test injector resistance. should be between 1.5 and 2.5 ohms.
check for blown fuses related to injection system
check all your grounds and make sure they are tight.
if you can source a noid light, you can plug the injector connector into that but like I said before if you have a multimeter you can just check for continuity while someone is cranking it over.
Last edited by ej7attack; 03-23-2014 at 04:32 PM.
#357
Honda-Tech Member
Thread Starter
Re: 94? Accord Project
Finally got my foglights working. The last idiot who had them had all the grounds wired together and hidden inside the loom. I have no clue what he was doing. I took all the grounds back out and put them to ground and of course they worked. They are really dim cause my battery is almost dead
Sadly, the bulb doesn't light up when I press the lights on
Sadly, the bulb doesn't light up when I press the lights on
#358
Honda-Tech Member
Thread Starter
Re: 94? Accord Project
http://www.youtube.com/watch?v=L2HuG...ature=youtu.be
It started up on starting fluid, the reason it didnt work is cause it was low on gas lol
It started up on starting fluid, the reason it didnt work is cause it was low on gas lol
Last edited by Zak325; 04-13-2014 at 05:20 PM.
#363
Honda-Tech Member
Thread Starter
#372
Honda-Tech Member
Thread Starter
#373
Honda-Tech Member
Thread Starter
#374
Honda-Tech Member
Thread Starter
Re: 94? Accord Project
New stuff. Probably not gonna use the camber kits just cause they're kinda sketchy.
Didnt realize the difference in height until now
Not sure how im gonna get this intercooler to fit. I'm gonna check out some other pics but from what ive seen, most people have taken off the bumper support.
S2K push to start
Just gonna re route my cigarette lighter to the glove box
Didnt realize the difference in height until now
Not sure how im gonna get this intercooler to fit. I'm gonna check out some other pics but from what ive seen, most people have taken off the bumper support.
S2K push to start
Just gonna re route my cigarette lighter to the glove box
#375
Honda-Tech Member
Thread Starter