SickSi99

Sup guys. Getting ready to finally install my Tein coilovers and have a couple of question.
1. I bought new tie rod ends, lockin nuts, and cotter pins. Anything else I should replace while I'm down there?
2. I also have a Progress sway bar/tie bar combo I wanna install while I have the suspension out, what else is needed for this?
3. I am by no means slamming the car but I do plan to lower quite a bit, will I require a camber kit? From what I researched I've decided to run -1F, -.5R and zero toe. Is this possible without aftermarket camber kits?

speedooo

The front coilovers should have an adjustment for camber built into the top hats. As for the rear, you'll need an adjustable UCA to make adjustments. I'm pretty low with -1* front/-3.8* rear with 0* toe, so that shouldn't be a problem. As for the sway bar, I've still running 100% stock components but I've heard/read that the stock end links are prone to breaking.

speedooo

Are you referencing tire/fender or rim/TA?

SickSi99

So you're saying I will need it for the rear correct? What camber setting would you recommend in the rear with a moderate drop?

speedooo

Yes, you will need an adjustable UCA to correct rear camber. I just did what was necessary to make 225/50's on my 16x7+40 slips clear an unrolled qp at the time.

SickSi99

Thanks man.

SickSi99

I'm not running that beefy of a tire nor do I plan on running a stupid amount of camber. I'll put an Ingalls rear camber kit next on my list to get.

uclid

hello everyone. Ive been MIA for awhile finally got internet again. cant wait to see all the new pics!

uclid

Nice I like it

DaveSi677

Man I miss you all!!! EP3 Squad is just a way better Squad then the FA5

EFn-DirtySouth

^^^not the final tune^^^ she's down again for some more upgrades: sidewinder manifold, painted valve cover, arp wheel studs etc etc...

dodger

how hard is it to stance a ep3 with out a camber kit and whats best wheel size?

SickSi99

Forgot this still existed! Still haven't installed my coilovers Finally ordered a rear camber kit though. New rims and tires are next!

SickSi99

Anyone running the Magnaflow Catback?

DaveSi677

Hey SickSi,

I didn't use the magnaflow catback... I ended up using the Vibrant Stealth Noir 2.75" and had it fitted to my 2.75" mid pipe. It had a nice deep sound loved it!

SickSi99

Thanks for the response!

DaveSi677

no problem bud!

Post up a video when you have it done... I miss my EP3

Also miss talking to most of you like Charleso, Cloumep3, aspire, nahonda04 and JoshEP3... man those were the good old day

SickSi99

I will once I get it installed. Thinking of getting an OBX race header along with the new exhaust. Just got the new clutch installed and its smooth like butter.

dodger

DaveSi677

Looking fresh!!!

sicksi99 get her done son

SickSi99

Man I just haven't had time with school and such to work on the car. But graduation is next month which will open the rest of the week to mod!

DaveSi677

SickSi99 post up some pics of what you have done!

SickSi99

EP3 is throwing P0325 for the knock sensor. Anyone ever changed this thing out?

SickSi99

Also, probably a stupid question but will the Password JDM intake fit without the battery relocation?

Bobby Getzan

you just confirmed my theory that white wheels would look good on my ep.