Oly/Lacey/Tum area
#7426
H-T White Ops
#7427
Honda-Tech Member
Join Date: Jun 2010
Location: Oly, wa
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
No dout, its kinda sad how much the honda community has died off around here!
most every one has parted out there cars or just straight up sold them! be nice to get some legit meets going again like we originally had!
just a small list of who's doesn't have honda's anymore to the best of my knowledge.
macknjack (jack) = sold both ef and fa
00blksi (kyle) = sold
davisaudio20 (kramer) = sold
kevineg9 (kevin) = parted out
fgtyper (alex) = totalled
gohatchgo (charoline) = sold
street sleeper (danny) = sold
fo-do fanatic (justin) = sold
ek4 carl (me)(carl) = sold but building new project
most every one has parted out there cars or just straight up sold them! be nice to get some legit meets going again like we originally had!
just a small list of who's doesn't have honda's anymore to the best of my knowledge.
macknjack (jack) = sold both ef and fa
00blksi (kyle) = sold
davisaudio20 (kramer) = sold
kevineg9 (kevin) = parted out
fgtyper (alex) = totalled
gohatchgo (charoline) = sold
street sleeper (danny) = sold
fo-do fanatic (justin) = sold
ek4 carl (me)(carl) = sold but building new project
#7429
Honda-Tech Member
Join Date: Mar 2011
Location: over here in this one place
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
whats up everyone!!!! so the next meet will be at chris' house this weekend finishing up his car and drinking in his garage. whoooo!!!!!
#7430
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
Whats up yall! good to see this thread movin again!!
two blue sedans to be exact Kevin's and Mine
You mofucker! LOL
You mofucker! LOL
#7433
Honda-Tech Member
Re: Oly/Lacey/Tum area
So we lost to Canada today in the hockey semi's and I'm not happy. I am by no means a big hockey fan, but when my country is playing I'm a fan. I just can't fathom how Canada is better than us at anything??
#7434
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
#7435
H-T White Ops
Re: Oly/Lacey/Tum area
No dout, its kinda sad how much the honda community has died off around here!
most every one has parted out there cars or just straight up sold them! be nice to get some legit meets going again like we originally had!
just a small list of who's doesn't have honda's anymore to the best of my knowledge.
macknjack (jack) = sold both ef and fa
00blksi (kyle) = sold
davisaudio20 (kramer) = sold
kevineg9 (kevin) = parted out
fgtyper (alex) = totalled
gohatchgo (charoline) = sold
street sleeper (danny) = sold
fo-do fanatic (justin) = sold
ek4 carl (me)(carl) = sold but building new project
most every one has parted out there cars or just straight up sold them! be nice to get some legit meets going again like we originally had!
just a small list of who's doesn't have honda's anymore to the best of my knowledge.
macknjack (jack) = sold both ef and fa
00blksi (kyle) = sold
davisaudio20 (kramer) = sold
kevineg9 (kevin) = parted out
fgtyper (alex) = totalled
gohatchgo (charoline) = sold
street sleeper (danny) = sold
fo-do fanatic (justin) = sold
ek4 carl (me)(carl) = sold but building new project
I still have my coupe and CRX.
Was something going on today? Saw (iirc) a modded black EF hatch, black EJ6 hatch, and red DC Integra.
#7438
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
nice numbers. whats all done?
The teg is pretty much done! just waiting for my new garage door to come in so I can get the damn thing out of the garage!!
H22 butterfly section fully eliminated! Using a B series IACV allows the hoses to be flipped up instead of down like the H/F Series IACV. This allows for more clearance on the IACV so the middle section can be fully eliminated. This will shorten the runners significantly. From a technical stand point this should give you better low end mid range. Witch is a noticeably lost when the IAB(butterflies) are not functioning properly. We will se on the dyno!
EGR blocked off for a cleaner look
#7441
Honda-Tech Member
Join Date: Mar 2008
Location: Olympia, WA, USA
Posts: 2,573
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
Hey folks. I know that I left kinda suddenly, and was an idiot to some people. I want to apologize for any old wounds and try anew all over again. Sad to see that so many of the folks I knew are gone.
I'm back in the "EF" game with a 1991 Honda Civic 5-speed, 2wd wagon.
I'm back in the "EF" game with a 1991 Honda Civic 5-speed, 2wd wagon.
#7442
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
#7443
Honda-Tech Member
#7445
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
Hey guys! My buddy Brian is building my gear box for me, here's a few Pics I took along with a few he took. Full Saenz straight cut's with forged input and countershafts. OBX diff rebuilt with stronger hardware and hardened belleville washers. Running the F Series final drive because the gears are stupid short, and running the H22 dual second gears syncro so I wont have issues with the 1-2 shift. 5th gear has an upgraded Syncrothech sleeve and carbon sycncro so I will no longer have the dreaded 5th gear grind, witch is a big deal to me because im needing to utilize 5th gear in the quarter due to the close ratio. Hope everyone is doing well! waiting for the 3-4th gear spacer sleeve to get back from being machined and it will be ready to rock
#7446
Re: Oly/Lacey/Tum area
Hey guys! My buddy Brian is building my gear box for me, here's a few Pics I took along with a few he took. Full Saenz straight cut's with forged input and countershafts. OBX diff rebuilt with stronger hardware and hardened belleville washers. Running the F Series final drive because the gears are stupid short, and running the H22 dual second gears syncro so I wont have issues with the 1-2 shift. 5th gear has an upgraded Syncrothech sleeve and carbon sycncro so I will no longer have the dreaded 5th gear grind, witch is a big deal to me because im needing to utilize 5th gear in the quarter due to the close ratio. Hope everyone is doing well! waiting for the 3-4th gear spacer sleeve to get back from being machined and it will be ready to rock
#7447
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oly/Lacey/Tum area
Thanks man! Just modivated to get it done before the end of the season and on the dyno, I dont want to get it tuned in cold winter weather LOL Then I will work through the winter getting the cage removed and up to spec. Get a stiffer suspension setup and then bring on the bodywork and paint... Its gonna be a long winter LOL
#7449
Re: Oly/Lacey/Tum area
Thanks man! Just modivated to get it done before the end of the season and on the dyno, I dont want to get it tuned in cold winter weather LOL Then I will work through the winter getting the cage removed and up to spec. Get a stiffer suspension setup and then bring on the bodywork and paint... Its gonna be a long winter LOL
time for our annual woodburn trip this weekend!
#7450
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts