I'm sorry mods... I think we need a rambling thread.
Honda-Tech Member
Re: I'm sorry mods... I think we need a rambling thread.
Has anyone attempted to replace the soft top fabric? I saw a diy on s2k and it says it takes around 10 hours which I believe. After going back and forth I think I'll put in a glass window from either robbins or ez top depending on the price. It seems fairly straight forward, just time consuming.
Honda-Tech Member
Join Date: Feb 2007
Location: dippin traffic on i95, pa
Posts: 5,268
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
^ im thinking that too. my top is going to **** quick and i dont think i can wait around till the hardtop.
Re: I'm sorry mods... I think we need a rambling thread.
Or just get a good, natural test booster like D-Aspartic Acid.
Has anyone attempted to replace the soft top fabric? I saw a diy on s2k and it says it takes around 10 hours which I believe. After going back and forth I think I'll put in a glass window from either robbins or ez top depending on the price. It seems fairly straight forward, just time consuming.
Nah. Well, not yet. Still holding out for one of those, but I did buy the convertible to be a convertible.
Seriously though, I'm up here visiting Philly and the roads suck in this car.
Honda-Tech Member
Join Date: Nov 2006
Location: JDM land, usa
Posts: 4,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
yea, ive replaced the soft top...it sucked, took about 8 hours start to finish but i had to run to lowes to get a new rivet gun because mine broke in the middle of the job
heres a pic of some of the carnage
heres a pic of some of the carnage
Honda-Tech Member
Join Date: Feb 2007
Location: dippin traffic on i95, pa
Posts: 5,268
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
yo boots i just threw on those diffusers no tape and used my own screws cause the one he supplied r gay.
p.s. it will make it easier if u trim the corners off of the back ends of them this way they wont rub up against the mudflap thing, makes it alot easier to align
oh and the second to last body plug kinda gets in the way u can take them off put the diffusers on trim the plugs and pop them back in
p.s. it will make it easier if u trim the corners off of the back ends of them this way they wont rub up against the mudflap thing, makes it alot easier to align
oh and the second to last body plug kinda gets in the way u can take them off put the diffusers on trim the plugs and pop them back in
Last edited by Black S2K; 11-04-2012 at 12:12 AM.
Honda-Tech Member
Join Date: Nov 2006
Location: JDM land, usa
Posts: 4,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
word, thanks for the heads up dave....how long did it take you? and i want to see pics so i can get an idea of how they'll look
Re: I'm sorry mods... I think we need a rambling thread.
I'm home on emergency leave. Had some family issues to deal with. I'll be heading downtown tonight, actually with my sister. If you're down, sure. We can have a beer. Not much of a drinker, but whatev. I'll PM my number.
Honda-Tech Member
Join Date: Feb 2007
Location: dippin traffic on i95, pa
Posts: 5,268
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
em1 i txted u
boots it didnt take too long i had her up on a lift with pops helping out. i started drilling and putting the screws in front to back trying to reduce as much sag/scrunch as possible came out pretty good. ill try to take some pics later. but my boy put one up on my fb u can take a peak there.
boots it didnt take too long i had her up on a lift with pops helping out. i started drilling and putting the screws in front to back trying to reduce as much sag/scrunch as possible came out pretty good. ill try to take some pics later. but my boy put one up on my fb u can take a peak there.
Honda-Tech Member
Join Date: Feb 2007
Location: dippin traffic on i95, pa
Posts: 5,268
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
hoping to hear back from the internship today.. that would be most excellent.
Honda-Tech Member
Re: I'm sorry mods... I think we need a rambling thread.
AW! Ive been alright, just pissed. Comp clutch is on back order and I had to get it at the shop and not the two places that had it in school. Just been working, saving and school crap.
Halo 4 came out today. Ill be on that a lot, add me if you wanna play S2k Kyle
Halo 4 came out today. Ill be on that a lot, add me if you wanna play S2k Kyle
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
B*a*n*n*e*d
iTrader: (15)
Re: I'm sorry mods... I think we need a rambling thread.
because its going to get worse. similar to your budget in California. or lack there of.
Honda-Tech Member
Join Date: Nov 2006
Location: JDM land, usa
Posts: 4,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
it doesnt matter...whoever won was going to have to spend their way out of the recession regardless....america doesnt export **** which is our biggest issue
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
/ 1.59$lb chickenbreast, 3.75-4.00/gal gas, etc.
B*a*n*n*e*d
iTrader: (15)
Re: I'm sorry mods... I think we need a rambling thread.
Ive been to your area many times. I enjoy visiting, but would never want to live there. Gas in my area is 3.15ish and not sure when chicken breasts became currency
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
that's 8.5$-9.35$ per fill, about 60 times a year for a grand total of less than 600$... lol combined with the fact that I'm away from extreme heat, extreme snow and have a 50-80 year-round temperature with the beach a walks away.. I'll take what I can get. Chicken breast and broccoli ain't currency, but that's the majority of my diet
Honda-Tech Member
Join Date: Feb 2007
Location: dippin traffic on i95, pa
Posts: 5,268
Likes: 0
Received 0 Likes
on
0 Posts
Re: I'm sorry mods... I think we need a rambling thread.
snowies going on soon. wonder how bad the bronze/gold going to look on the silverstone