SSR WHEEL PIC THREAD
#7827
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
Just ***** and giggles anyone know what original list price was on the mk2r's?
Also if i wanted to rebarrel mine to have a better lip/diff offset (dont have in mind) what barrels would i need to look for or what have you?
Also if i wanted to rebarrel mine to have a better lip/diff offset (dont have in mind) what barrels would i need to look for or what have you?
#7828
Honda-Tech Member
iTrader: (4)
Re: SSR WHEEL PIC THREAD
They were probably around $400 per wheel new. For barrels, you will proably be looking for 15" standard reverse barrels.
On a quick note...I had 2 tall EX-C caps that had jammed locks...took them apart (nerve racking) and was able to fix the lock. Couldn't believe I put that thing back together...
On a quick note...I had 2 tall EX-C caps that had jammed locks...took them apart (nerve racking) and was able to fix the lock. Couldn't believe I put that thing back together...
#7830
#7831
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
Ok thanks. One last question how do i know what barrels will be offset size without bolting together and measuring? I am a noob with rebarreling and such. Hope they have stickers giving width and offset?
#7832
Re: SSR WHEEL PIC THREAD
Most of these barrels are welded so what ever they are spec'ed at is close to what you'll get depending on your centers....
#7833
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
Ok. Again thanks kinda what i fig'd but was not sure. I would kinda like to finda 7.5-8" but keeping around a +30/+25 not sure what one i like more. As i am not trying to "tuck" or slam my setup. I like a small finger gap, which is were my pic apex ride best
#7834
war all of the time......
iTrader: (12)
Join Date: May 2003
Location: right over here, NC
Posts: 12,564
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
#7835
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
Ok cool thanks for the link. One last question about my mk2r's. Are the centers cast or forged? As in can the faces be fully polished like the lips?
#7836
Honda-Tech Member
iTrader: (4)
Re: SSR WHEEL PIC THREAD
Mike- I got the lock figured out, but still have no clue how the damn key works lol.
#7840
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
#7843
Trial User
Join Date: Nov 2012
Location: Ft. Lauderdale, FL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
So I purchased some used MK-III. They looked like this when I got them.
Stripped all the paint off
Painted the centers silver
and on my Fit
Stripped all the paint off
Painted the centers silver
and on my Fit
Last edited by mike410; 10-13-2013 at 12:27 PM.
#7845
Honda-Tech Member
Join Date: Jul 2002
Location: Tornado Alley, IL, USA
Posts: 1,059
Likes: 0
Received 1 Like
on
1 Post
Re: SSR WHEEL PIC THREAD
So I purchased some used MK-III. They looked like this when I got them.
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/mkiiirefinish.jpg[/IMG]
Stripped all the paint off
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20120819_180956.jpg[/IMG]
Painted the centers silver
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20121016_153054.jpg[/IMG]
and on my Fit
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20121103_171722.jpg[/IMG]
Now the weird thing is that I hear a clicking sound coming from one of the wheels. It is only once a rotation and only going forward. I moved the wheel to a different location and it still made noise. The bolts are torqued to 22 ft-lbs. Anyone know what could be causing this? I hope the center piece isn't cracked where it is sandwiched between the inner and outer barrel.
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/mkiiirefinish.jpg[/IMG]
Stripped all the paint off
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20120819_180956.jpg[/IMG]
Painted the centers silver
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20121016_153054.jpg[/IMG]
and on my Fit
[ ]http://i167.photobucket.com/albums/u159/mferlazzo/My%20Fit/IMG_20121103_171722.jpg[/IMG]
Now the weird thing is that I hear a clicking sound coming from one of the wheels. It is only once a rotation and only going forward. I moved the wheel to a different location and it still made noise. The bolts are torqued to 22 ft-lbs. Anyone know what could be causing this? I hope the center piece isn't cracked where it is sandwiched between the inner and outer barrel.
Last edited by toyomatt84; 11-13-2012 at 05:29 PM. Reason: Removed images from quote.
#7849
Re: SSR WHEEL PIC THREAD
They were originally 15x6.5 +20
The faces are custom machined and were mounted inside the lips rather than outside.
That's why they look different from any other Spinner mesh wheel..
The faces are custom machined and were mounted inside the lips rather than outside.
That's why they look different from any other Spinner mesh wheel..