|
Sign in using an external account
|
|
||||||||
| Welcome to Honda-Tech! | ||
|
|
Welcome to Honda-Tech.com.
You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today! |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Honda-Tech Member
1991 Honda Civic |
hey i have a bocshe O2 sensor i bought for my d16z6 swap motor runs just not perfect. i bought a garbage jumper harness from ebay so ive been on my own with this mess of a harness. anybody know the actual pins to run these 4 wires to so i can double check my harness? i have a black a grey and 2 whites... goin into a obd1 p28 any help or direction is appreciated.
|
|
|
|
|
|
#2 |
|
Honda-Tech Member
Garage is empty, add now
|
SEARCH!!! This has been covered MULTIPLE times even by myself.
http://www.htarchive.com/showthread.php?p=46925102 |
|
|
|
|
|
#3 |
|
Honda-Tech Member
1991 Honda Civic |
hey man thanks alot that was perfect
|
|
|
|
![]() |
|
|
| Thread Tools | Search this Thread |
|
|