Just made a crank pulley bolt tool...
08-01-2011, 07:20 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2010
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Just made a crank pulley bolt tool...
How should I "prep" the bolt, take a torch to it, spray pb blaster..any ideas..?
[IMG]
Uploaded with ImageShack.us[/IMG]
[IMG]
Uploaded with ImageShack.us[/IMG]
08-01-2011, 11:37 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2010
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just made a crank pulley bolt tool...
Its supposed to work..the black hex that's on the left side of the t fits in the hex and the handle rest on the floor or a jackstand to hold the pulley in place..I paid about $16 to make it.
08-01-2011, 02:44 PM
#7
Honda-Tech Member
Join Date: Apr 2010
Location: 305
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just made a crank pulley bolt tool...
lol i actual have sumthing similar but honestly why you need the extra reducer nut on the right for take it off hell even cut it a lil shorter
Thread
Thread Starter
Forum
Replies
Last Post
Fighterinsnatch
Honda Civic / Del Sol (1992 - 2000)
2
01-24-2010 06:26 PM
