95civickilla

Ok how can i fix this code i heard is one of the worst codes on the honda thing i know a lot of honda but this code its pissing me off my car is a 95 civic with the d16z6 engine rebuild but that code is pissing me off what could it be or what should i look for. no mods at all

Former User

If you don't have any performance problems, check the O2 sensor.

95civickilla

WELL I DONT KNOW THATS THE WAY I BOUGHT IT SO I DONT KNOW IF ITS THE SAME WAY MY CAR IS GOING TO RESPONSE OR IT NEEDS MORE POWER I DONT KNOW BUT ILL CHECK THE O2 SENSOR HOW CAN I CHECKED IT

Former User

No need for all caps.

Have you cleared the ECU to see whether the code returns?

95civickilla

OK I JUST DISCONNECTED IT AND PLUG IT BACK IN I CHECK THE CODES AND NO CODES WHERE BLINKING MY CHECK ENGINE LIGHT WAS ON AND MY SRS START IT BLINKING AND NEVER STOP ( I PLUG THE PAPERCLIP TO THE LITTLE CONNECTOR BELOW THE GLOVE COMPARTMENT

Former User

TURN OFF THE ALL CAPS ON YOUR KEYBOARD.

The SRS light blinks an SRS code with the service connector jumped when there is an airbag circuit problem.

Now drive the car to see whether code 43 returns.

95civickilla

yeah it blinks but never stops blinking the code 43 disappeer what could it be i heard it was a faulty ecu.

Former User

With the service connector jumped, are you saying the CEL is blinking a new code or that the SRS light is blinking?

95civickilla

no the srs light is blinking all the time no pauses or anything could it be a faulty ecu

Former User

Only with the service connector jumped, right? If you unjump the connector, does the SRS light just remain on steady.

95civickilla

no it turns off if i disconnected the srs and the check engine

Former User

If CEL code 43 does not return, then you are good to go.

For the SRS light, did someone remove an airbag?

95civickilla

nope is intact and the code 43 dosent appear but still messing up

mr2passat801

The SRS blinks on them. Mine does at least. And it goes directly back off... And if you say the car is still messing up WTF do you mean???

95civickilla

ok my srs light blinks and dont stop when i jumped the service connector to check my ecu. and my car still turns off by itself everytime i press the gas pedal and when is release it shuts off so i need to press the gas pedal all the time even to brake or it will turn off and i cant floor it once in a while cuz it wont rev so i need to press the gas little by little until i cross the 1200rpm range but that happens once in a while

Former User

How old are the plugs, wires, cap, and rotor? Have you checked the mechanical and ignition timings.

95civickilla

i check that already the timing and nothing and mechanical what do you mean with that

Former User

Did you do this:

Former User

95civickilla

ok when i do that connect the serivice connector does any light has to blink after connecting it

18237sja

mod rage

95civickilla

whats mod rage