[FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
#1
[FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
Here is my retrofit project for EG Fog lights using the Lexus IS300 or ES300 yellow projector lens housing.
#3
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
you can get low profile HID bulbs that fit the backend of the reflector housing, but some HID bubls wont fit inside the enclusoure, in that case do not use the enclusre.
instead seal up the two holes visible on the reflector with the same windows silicon mentioned in the DIY. Install the HID bulb, to make it water/weather proof, use heating dock tape (chrome) form home depot to cover the back of reflector housing and the bulb
instead seal up the two holes visible on the reflector with the same windows silicon mentioned in the DIY. Install the HID bulb, to make it water/weather proof, use heating dock tape (chrome) form home depot to cover the back of reflector housing and the bulb
#7
Honda-Tech Member
Join Date: Dec 2005
Location: SoCal Pram Hok Pi
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
Tiiight...I was just looking for this write up too.
Also, what bulb did you use for the Denji high beams? I bought some yellow ones, but they aren't as rich in color as yours.
Also, what bulb did you use for the Denji high beams? I bought some yellow ones, but they aren't as rich in color as yours.
Trending Topics
#8
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
i got few of these capsules with holder, you can have a pair for 25 shipped.
#9
Honda-Tech Member
Join Date: Dec 2005
Location: SoCal Pram Hok Pi
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
Its kew bro, I'm broke right now. I actually have the yellow capsules from the Legends, although it's too big to fit inside the headlight. I'll hit you back up if I get a chance to buy it from ya.
#13
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
one thing they are better then oem fogs, and with HID installed in them they do have a good output as they are projectors with a good cutoff line.
#14
Honda-Tech Member
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
So theres no glare with HID's in these fogs?? I find HIDs in fogs really stupid but if you have a projector then FUGG YEAH!
#15
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
bump... i got 2 sets of lexus fog lights for sale, one is round for $60 plus shipping
and
one is oval shape same shape as the oem stanly fogs for 80 plus shipping.
and
one is oval shape same shape as the oem stanly fogs for 80 plus shipping.
#17
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
Im the OP so mind your own business... i have created the DIY and if any of the members like to get the parts they can get it from me...
#19
Honda-Tech Member
Join Date: Dec 2010
Location: Lemont, IL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ} DIY: Lexus IS300/ES300 fog lights retrofitted into EG
Just so Im reading this right this is just to replace the lenses for the fog lights. If I want HID bulbs I need to do that seperatly correct? What bulbs/ballists would I need? Are the Lexus fogs HID to start with and do they have the proper cutoff on the lens so you dont blind others? Very good write up. Thanks for the info.
Thread
Thread Starter
Forum
Replies
Last Post
07BBS2K
Honda Civic / Del Sol (1992 - 2000)
1
04-10-2010 06:51 PM
...:::MaRk:::...
Honda Civic / Del Sol (1992 - 2000)
4
12-01-2006 09:01 PM