Honda and Acura Model Specific Forums

trang_man · 11-03-2009, 06:20 AM

lol, Its factory exhaust.
I'll post some pictures today.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

trang_man · 11-03-2009, 07:37 AM

So I ended up going to a muffler shop and getting the hanger bent toward the body.
Doesn't scrap anymore, but the rear still sags a bit.

I forgot to take some pictures, but I try my best to show you what I was talking about later on.

swittindoodle · 11-03-2009, 07:52 AM

well thats good i guess. mine hangs low but it only scrapes on speed bumps. or when i have a lot of people in the car.

trang_man · 11-03-2009, 10:28 AM

Yeah, If it scrapes anymore, I'm going to end up cutting the pipe out and move it up higher.

santii7 · 11-03-2009, 12:53 PM

cut the hangers like you said and hit the bumps with style!! slow and w. an angle.. lol

trang_man · 11-03-2009, 02:47 PM

haha, First I need to go lower and see what happens.
I need more idea for my car..

em2allstar · 11-03-2009, 03:04 PM

My pipping scrapes also it even has gotten flat from all the scrapping into my drive way.

Alan-em2 · 11-03-2009, 04:31 PM

trust, i do take sick angles when exiting. but imma try pulling it up towards the body. i want to go alil lower and i know the scraping will get worst but what could u do haha. gotta pay the price for being low

trang_man · 11-03-2009, 08:22 PM

lol, I just took it to the muffler shop today and got it done.
Cost me 20 bucks, but I don't scrape anymore.

I'm going to lower the car a little bit more, hopefully I won't scrape.

santii7 · 11-04-2009, 05:01 AM

niceee they just cut the hangers??

trang_man · 11-04-2009, 05:52 AM

They didn't cut the hangers, but instead bent it toward the chassic.

I haven't scraped at all... yet..

alexisthemovie · 11-04-2009, 04:57 PM

is it normal for an OEM catalytic converter to go out after 140k miles?

Strange thing happened - the alternator went out a couple weeks ago and it seemed to have taken out the catalytic converter and a bulb in the gauge cluster. Both were fine before. After the new alternator was put in, a CEL appeared and turned out to be the cat...

pstoner · 11-04-2009, 05:26 PM

i'm runnin 3in mandrel bent piping with a vibrant resonator and vibrant muffler on my k24 and i love it. good sound at idle and drivin.

DJ4Jesus77 · 11-06-2009, 11:36 PM

I'm lookin at the HKS Axle back for my 01 LX but im wondering where i can get a Spoon exhaust...i keep seeing them in pics but can never find them??...help would be appreciated.

pstoner · 11-06-2009, 11:57 PM

check spoonsports.us, they sell the axle back and piping, axle back is like 600 and the piping is 725. only for the rsx and ep3 tho.

DJ4Jesus77 · 11-06-2009, 11:59 PM

Quote:

Originally Posted by pstoner

check spoonsports.us, they sell the axle back and piping, axle back is like 600 and the piping is 725. only for the rsx and ep3 tho.

Appreciate it man...im wondering if there is some way that people are fabricating these to fit their em2...?

DizEvo · 11-10-2009, 10:48 PM

Hello Everyone,
I just joined the site, and this is my first post. I have an '03 Civic EX Coupe, auto trans. It was with a friend for two years, but our deal never materialized. I now have the car back and it needs major work. I basically want a stock, daily driver. I don't want to go to the dealer for everything, so I'm trying to piece it back together. The first thing I need is a stock, or "stock-like" exhaust. There is a Greddy exhaust on the car now. I also need a trunk lid. There is an aftermarket spoiler drilled into the lid now. I need stock seats. There are blue/grey leather seats in front and rear. Stock springs, rims, door panel for driver side, and a laundry list of other things. I live in OC, SoCal. If anyone has suggestions, I'm all eyes and ears.
Thanks.

em2allstar · 11-10-2009, 11:15 PM

I just had my hanger for my cat break massive air leak now...i have to check out the damage tomorrow morning.

pstoner · 11-11-2009, 06:18 AM

Quote:

Originally Posted by DJ4Jesus77

Appreciate it man...im wondering if there is some way that people are fabricating these to fit their em2...?

honestly i have no idea, this next winter i'm lookin at doin either the toda or spoon full exhaust, if i do the spoon i will let you know what i did, i'm not one to let a challenge get in my way lol

ahailey · 11-11-2009, 06:28 PM

probably been answered before but i can't find anything except aftermarket diameters, so does anyone know the inlet diameter of a tsx OEM muffler? is it 2.25 or 2.0?

okarl · 11-11-2009, 08:38 PM

Quote:

Originally Posted by DJ4Jesus77

Appreciate it man...im wondering if there is some way that people are fabricating these to fit their em2...?

They sound soo goooddddd : )

check out the subframe lol and i still have the beaks tie bar hardware lol

11-03-2009, 07:37 AM	#327
trang_man Junior Member Join Date: Feb 2009 Location: Houston Posts: 61	Re: Exhaust clearance So I ended up going to a muffler shop and getting the hanger bent toward the body. Doesn't scrap anymore, but the rear still sags a bit. I forgot to take some pictures, but I try my best to show you what I was talking about later on. __________________ Anthony Trang www.JHPhotographyOnline.com

11-03-2009, 07:52 AM	#328
swittindoodle Junior Member Join Date: Dec 2008 Location: southern california Posts: 11	Re: Exhaust clearance well thats good i guess. mine hangs low but it only scrapes on speed bumps. or when i have a lot of people in the car.

11-03-2009, 10:28 AM	#329
trang_man Junior Member Join Date: Feb 2009 Location: Houston Posts: 61	Re: Exhaust clearance Yeah, If it scrapes anymore, I'm going to end up cutting the pipe out and move it up higher. __________________ Anthony Trang www.JHPhotographyOnline.com

11-03-2009, 12:53 PM	#330
santii7 Junior Member Join Date: Apr 2009 Posts: 48	Re: Exhaust clearance cut the hangers like you said and hit the bumps with style!! slow and w. an angle.. lol __________________ Santii Last edited by santii7; 11-03-2009 at 05:44 PM.

11-03-2009, 02:47 PM	#331
trang_man Junior Member Join Date: Feb 2009 Location: Houston Posts: 61	Re: Exhaust clearance haha, First I need to go lower and see what happens. I need more idea for my car.. __________________ Anthony Trang www.JHPhotographyOnline.com

11-03-2009, 03:04 PM	#332
em2allstar Junior Member Join Date: May 2009 Posts: 35	Re: Exhaust clearance My pipping scrapes also it even has gotten flat from all the scrapping into my drive way.

11-03-2009, 04:31 PM	#333
Alan-em2 Junior Member Join Date: May 2008 Location: Los Angeles, CA, USA Posts: 135	Re: Exhaust clearance trust, i do take sick angles when exiting. but imma try pulling it up towards the body. i want to go alil lower and i know the scraping will get worst but what could u do haha. gotta pay the price for being low __________________ HEEEEY...get your own there FREEEE!!!

11-03-2009, 08:22 PM	#334
trang_man Junior Member Join Date: Feb 2009 Location: Houston Posts: 61	Re: Exhaust clearance lol, I just took it to the muffler shop today and got it done. Cost me 20 bucks, but I don't scrape anymore. I'm going to lower the car a little bit more, hopefully I won't scrape. __________________ Anthony Trang www.JHPhotographyOnline.com

11-04-2009, 05:01 AM	#335
santii7 Junior Member Join Date: Apr 2009 Posts: 48	Re: Exhaust clearance niceee they just cut the hangers?? __________________ Santii

11-04-2009, 05:52 AM	#336
trang_man Junior Member Join Date: Feb 2009 Location: Houston Posts: 61	Re: Exhaust clearance They didn't cut the hangers, but instead bent it toward the chassic. I haven't scraped at all... yet.. __________________ Anthony Trang www.JHPhotographyOnline.com

11-04-2009, 04:57 PM	#337
alexisthemovie Member Join Date: May 2006 Location: la crescenta, ca Posts: 4,554	Re: ► The Official Exhaust Thread (Questions, comments, etc.) is it normal for an OEM catalytic converter to go out after 140k miles? Strange thing happened - the alternator went out a couple weeks ago and it seemed to have taken out the catalytic converter and a bulb in the gauge cluster. Both were fine before. After the new alternator was put in, a CEL appeared and turned out to be the cat... __________________ FACEBOOK ANYONE?

11-04-2009, 05:26 PM	#338
pstoner Junior Member Join Date: Aug 2008 Location: steen, mn, united states Posts: 34	Re: ► The Official Exhaust Thread (Questions, comments, etc.) i'm runnin 3in mandrel bent piping with a vibrant resonator and vibrant muffler on my k24 and i love it. good sound at idle and drivin.

11-06-2009, 11:36 PM	#339
DJ4Jesus77 New User 2001 Honda Civic Join Date: Aug 2009 Posts: 3	Re: ► The Official Exhaust Thread (Questions, comments, etc.) I'm lookin at the HKS Axle back for my 01 LX but im wondering where i can get a Spoon exhaust...i keep seeing them in pics but can never find them??...help would be appreciated.

11-06-2009, 11:57 PM	#340
pstoner Junior Member Join Date: Aug 2008 Location: steen, mn, united states Posts: 34	Re: ► The Official Exhaust Thread (Questions, comments, etc.) check spoonsports.us, they sell the axle back and piping, axle back is like 600 and the piping is 725. only for the rsx and ep3 tho.

11-10-2009, 10:48 PM	#342
DizEvo New User Join Date: Nov 2009 Location: SoCal Posts: 1	Re: ► The Official Exhaust Thread (Questions, comments, etc.) Hello Everyone, I just joined the site, and this is my first post. I have an '03 Civic EX Coupe, auto trans. It was with a friend for two years, but our deal never materialized. I now have the car back and it needs major work. I basically want a stock, daily driver. I don't want to go to the dealer for everything, so I'm trying to piece it back together. The first thing I need is a stock, or "stock-like" exhaust. There is a Greddy exhaust on the car now. I also need a trunk lid. There is an aftermarket spoiler drilled into the lid now. I need stock seats. There are blue/grey leather seats in front and rear. Stock springs, rims, door panel for driver side, and a laundry list of other things. I live in OC, SoCal. If anyone has suggestions, I'm all eyes and ears. Thanks.

11-10-2009, 11:15 PM	#343
em2allstar Junior Member Join Date: May 2009 Posts: 35	Re: ► The Official Exhaust Thread (Questions, comments, etc.) I just had my hanger for my cat break massive air leak now...i have to check out the damage tomorrow morning.

11-11-2009, 06:28 PM	#345
ahailey Junior Member Join Date: Feb 2009 Posts: 11	Re: ► The Official Exhaust Thread (Questions, comments, etc.) probably been answered before but i can't find anything except aftermarket diameters, so does anyone know the inlet diameter of a tsx OEM muffler? is it 2.25 or 2.0?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search