Official FS/WTB thread for all classic hondas
#401
Honda-Tech Member
Join Date: Dec 2008
Location: Kansas City
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas
Both of my cars and parts collection are up for sale as a package deal i just picked up another 1st gen lightning and have no time or room for this civic!
87 Civic si hatch back 135k black on black mint mint shell southern car o rust and never has had rust o accidents clean title runs and drives has lower end noise.
List of parts for the civic most are not installed..
Jdm corner lights.
Edm headlights.
Jdm fender markers.
Edm taillights with built in rear fog.
Edm clock
Clock delete.
Mint si center garnish.
Jdm yellow fog lights with brackets and period correct 3g switch..
Jdm rear mudflaps
Optional front mud flaps.
Wiper delete antenna delete.
Optonal arm rest
Optional cargo cover
Optional rear speakers
Optional sunroof shade bag and visor.
Extra mint si door panels
Mirror delete.
4dr rear door handles (keyless).
Og intake and filter
Stock suspension rolling on e30 bbs wheels.
Stock air box intake tube etc.
Stock exhaust with 99-00 si tip.
Way to much to list there is most likely more i am forgetting.
87 Civic si hatch back 135k black on black mint mint shell southern car o rust and never has had rust o accidents clean title runs and drives has lower end noise.
List of parts for the civic most are not installed..
Jdm corner lights.
Edm headlights.
Jdm fender markers.
Edm taillights with built in rear fog.
Edm clock
Clock delete.
Mint si center garnish.
Jdm yellow fog lights with brackets and period correct 3g switch..
Jdm rear mudflaps
Optional front mud flaps.
Wiper delete antenna delete.
Optonal arm rest
Optional cargo cover
Optional rear speakers
Optional sunroof shade bag and visor.
Extra mint si door panels
Mirror delete.
4dr rear door handles (keyless).
Og intake and filter
Stock suspension rolling on e30 bbs wheels.
Stock air box intake tube etc.
Stock exhaust with 99-00 si tip.
Way to much to list there is most likely more i am forgetting.
Thank you and have a blessed day.
Chas
cltransactions@gmail.com
#402
Honda-Tech Member
Join Date: Oct 2008
Location: ft lauderdale, fl, usa
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas
Both of my cars and parts collection are up for sale as a package deal i just picked up another 1st gen lightning and have no time or room for this civic!
87 Civic si hatch back 135k black on black mint mint shell southern car o rust and never has had rust o accidents clean title runs and drives has lower end noise.
List of parts for the civic most are not installed..
Jdm corner lights.
Edm headlights.
Jdm fender markers.
Edm taillights with built in rear fog.
Edm clock
Clock delete.
Mint si center garnish.
Jdm yellow fog lights with brackets and period correct 3g switch..
Jdm rear mudflaps
Optional front mud flaps.
Wiper delete antenna delete.
Optonal arm rest
Optional cargo cover
Optional rear speakers
Optional sunroof shade bag and visor.
Extra mint si door panels
Mirror delete.
4dr rear door handles (keyless).
Og intake and filter
Stock suspension rolling on e30 bbs wheels.
Stock air box intake tube etc.
Stock exhaust with 99-00 si tip.
Way to much to list there is most likely more i am forgetting.
86 Crx si auto-x ready nice shell for its age minemale rust all lights headlights taillights work etc runs and drives very fast needs a clutch clean title..
List of mods.
Full 89 integra d16a1 swap.
Integra front brakes knuckles rear brakes and axle etc.
Pacesetter header ported.
Strait piped into og duel tip muffler.
Stock flywheel lightened with cm clutch (slips bad)
Light speed strut bar light speed sway bars.
Intrax rear springs in it also have 350lb ground control coilovers for the rear.
Upgrade motoring torsion bars
Momo wheel nrg quick release with wheel lock.
New radiator electric fan wired to a switch push button start walbro hp pump wired to a switch.
Gutted interior and sunroof stock dash and cluster with 2 racing seats.
Car is tied in the rear with battery in the back
Phone dials pc white.
Price is $4000 Pm me email for pictures
87 Civic si hatch back 135k black on black mint mint shell southern car o rust and never has had rust o accidents clean title runs and drives has lower end noise.
List of parts for the civic most are not installed..
Jdm corner lights.
Edm headlights.
Jdm fender markers.
Edm taillights with built in rear fog.
Edm clock
Clock delete.
Mint si center garnish.
Jdm yellow fog lights with brackets and period correct 3g switch..
Jdm rear mudflaps
Optional front mud flaps.
Wiper delete antenna delete.
Optonal arm rest
Optional cargo cover
Optional rear speakers
Optional sunroof shade bag and visor.
Extra mint si door panels
Mirror delete.
4dr rear door handles (keyless).
Og intake and filter
Stock suspension rolling on e30 bbs wheels.
Stock air box intake tube etc.
Stock exhaust with 99-00 si tip.
Way to much to list there is most likely more i am forgetting.
86 Crx si auto-x ready nice shell for its age minemale rust all lights headlights taillights work etc runs and drives very fast needs a clutch clean title..
List of mods.
Full 89 integra d16a1 swap.
Integra front brakes knuckles rear brakes and axle etc.
Pacesetter header ported.
Strait piped into og duel tip muffler.
Stock flywheel lightened with cm clutch (slips bad)
Light speed strut bar light speed sway bars.
Intrax rear springs in it also have 350lb ground control coilovers for the rear.
Upgrade motoring torsion bars
Momo wheel nrg quick release with wheel lock.
New radiator electric fan wired to a switch push button start walbro hp pump wired to a switch.
Gutted interior and sunroof stock dash and cluster with 2 racing seats.
Car is tied in the rear with battery in the back
Phone dials pc white.
Price is $4000 Pm me email for pictures
Pictures please and also very interested in the civic si if you want to sell just the civic.pm me please or just call me (954)257-9787
#403
My Name is Nobody
Re: Official FS/WTB thread for all classic hondas
good condition Mugen cf48 center caps. Outer surface is extremely nice, inside one or two of the tabs are broken, but the caps stay in place... great for a car show where you can take off the caps for driving and put on the caps the show.
Please ask all questions before bidding, shipping will be $10
high res pictures:
Please ask all questions before bidding, shipping will be $10
high res pictures:
#407
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas
i have a civic front mask i believe, and im looking for a crx front mask, i accidentally got
the wrong one =[
the wrong one =[
#408
Honda-Tech Member
#410
Honda-Tech Member
Join Date: Nov 2005
Location: Somewhere puffin away in Spokane, USA
Posts: 3,643
Likes: 0
Received 0 Likes
on
0 Posts
JDM EW5
JDM EW1
Selling my Motor as I do not have anything to put it in. I was trying to hold on to it, since I have only seen 2 of these before. This engine came with a broken down carbed CRX. Owner got this "replacement" motor from a importer, since the CRX was a DX.... this engine never made it into the car. Would be perfect of autocross.. looks like the stock US engine
and for those of you that do not know what you are looking at...
Engine is located in SPokane WA. I will ship at buyer expense.. there is an automatic tranny included... but I can remove it for shipping per buyer request
$400 plus shipping
Selling my Motor as I do not have anything to put it in. I was trying to hold on to it, since I have only seen 2 of these before. This engine came with a broken down carbed CRX. Owner got this "replacement" motor from a importer, since the CRX was a DX.... this engine never made it into the car. Would be perfect of autocross.. looks like the stock US engine
and for those of you that do not know what you are looking at...
EW5
* similar to the EW1, Fuel injected CVCC 12Valve 4 Aux valves. A third throttle plate in the throttle body supplied intake air to a 5th injector which powered the CVCC ports, The rated power is different between the Civic and the CR-X the Civic makes 100 PS (99 hp) 5800 rpm 13.2 kg/m (9.7 lb·ft) torque @ 4000 rpm, the CR-X made 110 PS (110 hp) 5800 rpm 13.8 kg/m (10.2 lb·ft) torque @ 4500 rpm. Differences in power are largely down to a more efficient exhaust system on the CR-X it used a factory cast iron 4-2-1 extractor went through a catalytic converter further down the exhaust system and had twin exit tail pipes. The Civic had a short 4-1 design into a catalytic converter and single pipe exit. There was a revised intake manifold for vehicles produced in 1986 and 1987. The EW5 was not available in the North American markets, only Japan It came in the following models 1.5i CR-X, 25i 3DR Civic, Ballade CRi 4DR Sedan
* similar to the EW1, Fuel injected CVCC 12Valve 4 Aux valves. A third throttle plate in the throttle body supplied intake air to a 5th injector which powered the CVCC ports, The rated power is different between the Civic and the CR-X the Civic makes 100 PS (99 hp) 5800 rpm 13.2 kg/m (9.7 lb·ft) torque @ 4000 rpm, the CR-X made 110 PS (110 hp) 5800 rpm 13.8 kg/m (10.2 lb·ft) torque @ 4500 rpm. Differences in power are largely down to a more efficient exhaust system on the CR-X it used a factory cast iron 4-2-1 extractor went through a catalytic converter further down the exhaust system and had twin exit tail pipes. The Civic had a short 4-1 design into a catalytic converter and single pipe exit. There was a revised intake manifold for vehicles produced in 1986 and 1987. The EW5 was not available in the North American markets, only Japan It came in the following models 1.5i CR-X, 25i 3DR Civic, Ballade CRi 4DR Sedan
Engine is located in SPokane WA. I will ship at buyer expense.. there is an automatic tranny included... but I can remove it for shipping per buyer request
$400 plus shipping
#411
Honda-Tech Member
#412
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas
I may be intrested in the EW1. I just have one question. Is the block the same as the EW1 block that is in my 83 civic?
#415
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas
I have a full DCOE Dual-Carb Set-Up for Sale. Includes 2 Mikuni 40's, TWM manifold for the D15a3/EW motors, in-line fuel pump and Earls filter. Carbs were totally rebuilt around 800 miles ago. They are like new! $675 OBO.
Also have a set of Mugen MR5's; 14"; in EXCELLENT condition; no center caps/lug covers included, no tires included, just the minty rims. Asking $550 for those.
Contact me directly at DTaylor@pinelakeprep.org for questions, offers, or more pics!
Also have a set of Mugen MR5's; 14"; in EXCELLENT condition; no center caps/lug covers included, no tires included, just the minty rims. Asking $550 for those.
Contact me directly at DTaylor@pinelakeprep.org for questions, offers, or more pics!
#417
Honda-Tech Member
Thread Starter
iTrader: (4)
Join Date: May 2005
Location: La Mirada CA 90638
Posts: 11,234
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas
Wow its been years since I had my Ballade and made this thread. TTT get this hard to find stuff out here
#418
Honda-Tech Member
Join Date: Oct 2008
Location: ft lauderdale, fl, usa
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas
I'm still waiting on the pictures ,I'm seriously interested, please if you want send me the pictures when you get a chance to andrulo7@hotmail.com
thanks
thanks
#419
Honda-Tech Member
Join Date: Jan 2006
Location: Charlotte, NC, USA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out an 70 N600 (rotten)
Well, I knew I shouldn't have bought that 83 1500S, the local municipality says I can't have an unregistered car just sitting in my driveway, and I've got nowhere else to put it, so I'm going to try and sell it.
It's a 83 Civic 1500S, 124K miles, interior is in exceptionally well condition, one small crack in the dash, a few tears in the seats, but otherwise nice.
The body needs some attention. There are some rust spots, but nothing rusted through, very minor stuff. Faded paint on roof, and some dents/dings/scratches here and there.
I personally haven't heard the car run, but the previous owner assures me that it runs and drives fine. It's not running at the moment because the down-pipe that runs off of the exhuast manifold was off (I guess the original peice failed, and I've got a new peice to put on). I just haven't gotten around to putting it on yet.
Now I would just like to just get back what I have into it. I paid $400 for the car, $50 to my friend to pick it up, and something like $200 in parts (new cat convertor, and the exhuast peice I mentioned had to be custom made, new distrib cap/rotor, and a few other minor things).
So $650 will buy the car as-is. However, if it appears the car would make me more money by parting it out, I will certainly consider doing that (if interested in parts, please post or PM me with what you might be interested in).
Jason.
It's a 83 Civic 1500S, 124K miles, interior is in exceptionally well condition, one small crack in the dash, a few tears in the seats, but otherwise nice.
The body needs some attention. There are some rust spots, but nothing rusted through, very minor stuff. Faded paint on roof, and some dents/dings/scratches here and there.
I personally haven't heard the car run, but the previous owner assures me that it runs and drives fine. It's not running at the moment because the down-pipe that runs off of the exhuast manifold was off (I guess the original peice failed, and I've got a new peice to put on). I just haven't gotten around to putting it on yet.
Now I would just like to just get back what I have into it. I paid $400 for the car, $50 to my friend to pick it up, and something like $200 in parts (new cat convertor, and the exhuast peice I mentioned had to be custom made, new distrib cap/rotor, and a few other minor things).
So $650 will buy the car as-is. However, if it appears the car would make me more money by parting it out, I will certainly consider doing that (if interested in parts, please post or PM me with what you might be interested in).
Jason.
#420
Honda-Tech Member
Join Date: Jul 2009
Location: Berkeley, CA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Need 2nd gen rear speaker panels and wiring
I want to add rear speakers to my 2gen 1500dx so I'm looking for the speaker panels to stick in the cubby holes and the wires that go in the back of the HU to wire up four speakers.
Fairly urgent.
Can email at gav225 at gmail dot com or phone/text (51o)B62-31BB
MONEY IS WAITING
Thanks
Fairly urgent.
Can email at gav225 at gmail dot com or phone/text (51o)B62-31BB
MONEY IS WAITING
Thanks
#421
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas
5 minutes left in the Ebay auction for the manifold and ALL need parts for our CRX/Civics: Fuel pump, earl's filter, throttle linkage plate, everthing...
http://cgi.ebay.com/ebaymotors/Mikuni-Webe...sQ5fAccessories
5 hours on ULTRA cheap Mikuni's, freshly rebuilt, NO RESERVE, very low starting price. 36 watchers, no bids. I'm assuming that last 20 seconds are going to get interesting on this one, so set your watches.
http://cgi.ebay.com/ebaymotors/Mikuni-40-P...sQ5fAccessories
If you miss the manifold auction, hit me up to make a package deal on everything.
DTaylor@pinelakeprep.org
These carbs need to find a good home.
Thanks for looking, Dan.
http://cgi.ebay.com/ebaymotors/Mikuni-Webe...sQ5fAccessories
5 hours on ULTRA cheap Mikuni's, freshly rebuilt, NO RESERVE, very low starting price. 36 watchers, no bids. I'm assuming that last 20 seconds are going to get interesting on this one, so set your watches.
http://cgi.ebay.com/ebaymotors/Mikuni-40-P...sQ5fAccessories
If you miss the manifold auction, hit me up to make a package deal on everything.
DTaylor@pinelakeprep.org
These carbs need to find a good home.
Thanks for looking, Dan.
#422
Re: Official FS/WTB thread for all classic hondas
does any one have corner lights for a 1986 crx cannot find them anywhere any suggestions will pay to ship pm me if ya have any you wanna sell
#423
Honda-Tech Member
Join Date: Dec 2002
Location: Old Bridge, N J
Posts: 3,251
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas
#425
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas
well i have this steering wheel id like to sell $20 obo
and i also have two pg7 ecus one auto and the other one stick $20 obo
and a pm5 $10 obo
i also have a ob1 distributor for a d15b $40 obo
i have a head rest for si seat $5
is in good condition not faded right there is just dirty
i have one steelie (14") with new tire $25
and now i have a set of honda wheels with good tires (about 90% tread still there) $150obo
(195/60r14 86 H size of tires)
and also have a t3/t4 turbo, no shaft play very good condition $150obo
ill post a picture soon
now i also have a 60mm wastegate $175obo
bluetops DSM 450cc injectors $50 obo
pm me for more information. thanks
need everything gone asap
and i also have two pg7 ecus one auto and the other one stick $20 obo
and a pm5 $10 obo
i also have a ob1 distributor for a d15b $40 obo
i have a head rest for si seat $5
is in good condition not faded right there is just dirty
i have one steelie (14") with new tire $25
and now i have a set of honda wheels with good tires (about 90% tread still there) $150obo
(195/60r14 86 H size of tires)
and also have a t3/t4 turbo, no shaft play very good condition $150obo
ill post a picture soon
now i also have a 60mm wastegate $175obo
bluetops DSM 450cc injectors $50 obo
pm me for more information. thanks
need everything gone asap