11.50 Index builds
#26
Honda-Tech Member
iTrader: (2)
Join Date: Apr 2007
Location: Riverview, NB, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Re: 11.50 Index builds
TUBULAR FRONT SUB FRAME AKA "K MEMBER" | fcsrace
Many companies make them for Camaros and mustangs and they are bigger and only a few hundred dollars, wonder why one for a Honda is triple the price?
#27
Honda-Tech Member
Re: 11.50 Index builds
They are not cheap by any means.....
TUBULAR FRONT SUB FRAME AKA "K MEMBER" | fcsrace
Many companies make them for Camaros and mustangs and they are bigger and only a few hundred dollars, wonder why one for a Honda is triple the price?
TUBULAR FRONT SUB FRAME AKA "K MEMBER" | fcsrace
Many companies make them for Camaros and mustangs and they are bigger and only a few hundred dollars, wonder why one for a Honda is triple the price?
Cams are $700 on average for a Bvtec
I bought a full roller cam setup w/ lifters, springs, retainers, for my 383 SBC for $750....quality stuff too. $750 on cams and VT in a honda head (assuming all new)
#28
Honda-Tech Member
iTrader: (2)
Join Date: Apr 2007
Location: Riverview, NB, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Re: 11.50 Index builds
Supply and demand my friend....and the honda world has its tuner by the ***** for "specialty" parts.
Cams are $700 on average for a Bvtec
I bought a full roller cam setup w/ lifters, springs, retainers, for my 383 SBC for $750....quality stuff too. $750 on cams and VT in a honda head (assuming all new)
Cams are $700 on average for a Bvtec
I bought a full roller cam setup w/ lifters, springs, retainers, for my 383 SBC for $750....quality stuff too. $750 on cams and VT in a honda head (assuming all new)
Really though, I bought a set of JE pistons for the wife's engine and they were 650 for the set of four. I bought a set for my LS3 and got 8 for the same price.....lol.
#29
Honda-Tech Member
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes
on
0 Posts
Re: 11.50 Index builds
All it takes is one person to step up and make enough of them to make it cheap. They have to be willing to risk that people will actually buy them though.
#30
Honda-Tech Member
Re: 11.50 Index builds
Haha I don't even like talking about building a domestic vs. a honda....
#32
Honda-Tech Member
Thread Starter
Join Date: Mar 2013
Location: Brooklyn, NY
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: 11.50 Index builds
this exact frame is an FCS frame. it wighs 9lbs. i got it quite a while back. since then they have also released front lower control arms to also go with this cross member. NRG-Tech has also recently released their own version of the cross member and crontrol arms.
Thread
Thread Starter
Forum
Replies
Last Post
integrawow
Drag Racing
4
05-08-2009 08:37 PM