Go Back   Honda-Tech >

Honda and Acura Appearance/Cosmetic Forums

> Honda / Acura


Reply
 
Thread Tools Search this Thread
Old 06-02-2008, 06:46 PM   #1
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default My EJ8 shaved, tucked, and repainted Blaze red crystal

SOLD

http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT

http://www.autotrader.com/fyc/vdp.jsp?car_id=260173329

All questions and comments welcome. Most of the work I did myself and it was my first time at it, so let me know what you think.

Before:




Here's the rundown. After Nopi, I decided to shave my bay and do better wire tuck. Being an amateur welder and having access to just a stick welder, it took me just under a month to weld, grind, and have the bay ready for filler. I worked after hours and on the weekend at work. I had help here and there on the difficult parts. It was then taken to the body shop. There I filled and sanded the bay. Most of the bay had to be hand sanded. I came back and did the same thing after primer. This is where I left off. The rest of the exterior and paint was professionally handled. In the meantime, I finished my harness. Reassembly didn't take long. I had the engine running the day after I got the car back from paint.












After:






I welded in some plates to cover the two holes behind each headlight. The driver's side was for the a/c and washer reservoir. The passenger side hole was for the oem air box assembly.



Here is a shot of the seam sealer. I just sanded down the factory sealer to make it look smoother and less noticeable.



The support here alone had 25 holes to weld up. This is counting from fender to fender.



Harness and inverted injectors


Tacky or tasteful. I love this beer.


Interior







Show pic

















Special thanks to:
-Justin-, Brewer, and Chris miller for the pics
Tracy (speeddreamz.com) for allowing me to use the shop (Mobile Electronics and Performance in Tuscaloosa, AL) after work hours
Tracy and Yosuke for helping on the hard welds
Ryan Clough at Automations in Bessemer, AL for the body and paint
Chase with the wire tuck tips
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold

Last edited by maxpsi; 06-28-2009 at 01:41 PM.
maxpsi is offline Report Post   Reply With Quote
Old 06-02-2008, 06:56 PM   #2
Chef Andre
Member
My Garage
 
Chef Andre's Avatar
 
Join Date: Apr 2006
Location: On a MISSION to make it to IA
Posts: 3,812
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (maxpsi)

SICK!!!!!!!!!!!!!!!!!!!!!!
Chef Andre is online now Report Post   Reply With Quote
Old 06-02-2008, 07:11 PM   #3
Brice.Hayden
Resident Canoe Bully
My Garage
 
Brice.Hayden's Avatar
 
Join Date: Mar 2005
Posts: 8,159
Send a message via AIM to Brice.Hayden
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (Chef Andre)

wow i dig the color and i like everything but the sparo seats
__________________
MissShift
Quote:
Originally Posted by DC_Legacy View Post
its like these noobs see the PCT and are drawn to it senselessly like a fly drawn to a bug zapper.
Brice.Hayden is offline Report Post   Reply With Quote
Old 06-02-2008, 07:22 PM   #4
jdmekrobot
Junior Member
My Garage
 
jdmekrobot's Avatar
 
Join Date: May 2006
Location: mil.wau.key
Posts: 979
Send a message via AIM to jdmekrobot
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (Chef Andre)

it looks extra nice and fresh
__________________
ef9.
jdmekrobot is offline Report Post   Reply With Quote
Old 06-02-2008, 07:24 PM   #5
bjones
Junior Member
My Garage
 
bjones's Avatar
 
Join Date: May 2007
Location: usa
Posts: 554
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (Brice.Hayden)

wow that color is hot
bjones is offline Report Post   Reply With Quote
Old 06-02-2008, 07:30 PM   #6
NSXOT1C
My Garage
 
NSXOT1C's Avatar
 
Join Date: Sep 2004
Location: pk, Ny, USA
Posts: 146
Send a message via AIM to NSXOT1C
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (bjones)

looks awesome!! great work
NSXOT1C is offline Report Post   Reply With Quote
Old 06-02-2008, 07:41 PM   #7
mr.coupe
Member
My Garage
 
mr.coupe's Avatar
 
Join Date: Jan 2006
Location: touge on my driveway, TN, US
Posts: 5,038
Send a message via AIM to mr.coupe
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (NSXOT1C)

great job homie!! looks sickk
__________________
|Chasebays|Hybrid-Racing|JDMSPEEDWORX|DSS|Suja 1|weksos|Royal Purple
My build
Track.One
mr.coupe is offline Report Post   Reply With Quote
Old 06-02-2008, 07:43 PM   #8
EM1adobogirl
Junior Member
My Garage
 
EM1adobogirl's Avatar
 
Join Date: Dec 2007
Location: washington
Posts: 630
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (mr.coupe)

clean
EM1adobogirl is offline Report Post   Reply With Quote
Old 06-02-2008, 07:44 PM   #9
sh!tsWEAK!
Member
My Garage
 
sh!tsWEAK!'s Avatar
 
Join Date: Aug 2005
Location: swallow my words. taste my thoughts., and if its too nasty spit it back at me, USA
Posts: 5,494
Send a message via AIM to sh!tsWEAK!
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (NSXOT1C)

nice work man!
__________________
| MissShift |
TADpole, like a frog.
FS: EG nose mask http://hondamarketplace.com/showthre...6#post38796416
sh!tsWEAK! is offline Report Post   Reply With Quote
Old 06-02-2008, 07:45 PM   #10
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (mr.coupe)

Thanks guys! I was leaning towards the Chevrolet red, at first, that looks similar to this color. Ryan noticed it had a good bit of purple in it. You've probably seen the color on the new Tahoe. Anyways, Ryan pointed me towards this color. This color is on Chargers, Ram p/u, crossfire, as well as other chrysler vehicles.

Most people would think it was out of a ppg catalog. Did you?
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold
maxpsi is offline Report Post   Reply With Quote
Old 06-02-2008, 07:54 PM   #11
SpeedDreamz.com
Member
My Garage
 
SpeedDreamz.com's Avatar
 
Join Date: Aug 2003
Location: Tuscaloosa, Al, usa
Posts: 5,192
Send a message via AIM to SpeedDreamz.com
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (maxpsi)

Stick welder? You were using my $2k tig welder. Turned out pretty nice. The engine bay looks much cleaner.
__________________
Mobile Electronics and Performance, Tuscaloosa, Alabama 205-554-1554
SpeedDreamz.com is offline Report Post   Reply With Quote
Old 06-02-2008, 07:57 PM   #12
HondamanXxX
Member
My Garage
 
HondamanXxX's Avatar
 
Join Date: Apr 2007
Location: New Jersey
Posts: 6,706
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (Chef Andre)

That bay is gorgeous
__________________
FlickR
Quote:
Originally Posted by dphamt View Post
wat intake should i get? i want one that sounds like my car is running through the wind. a very clean sound.
HondamanXxX is offline Report Post   Reply With Quote
Old 06-02-2008, 07:57 PM   #13
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default Re: My EJ8 shaved, tucked, and repainted Blaze red crystal (SpeedDreamz.com)

You can imagine how much faster it would have gone with a wire-feed.
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold
maxpsi is offline Report Post   Reply With Quote
Old 06-02-2008, 08:04 PM   #14
matysik27
Junior Member
My Garage
 
matysik27's Avatar
 
Join Date: Jun 2007
Location: Millerwaukee, Wisconsin, u.s.
Posts: 207
Default

sick!!
__________________
1994 V-DUB JETTA!- DD
2001 Honda Prelude- in the build phase
matysik27 is offline Report Post   Reply With Quote
Old 06-02-2008, 08:15 PM   #15
JdMhEaD
Member
My Garage
 
JdMhEaD's Avatar
 
Join Date: Sep 2006
Location: Hoover, AL, USA
Posts: 2,868
Send a message via AIM to JdMhEaD
Default Re: (matysik27)

Sick job dude! looks great in person!
__________________
PG-K
2000 GSR
JdMhEaD is offline Report Post   Reply With Quote
Old 06-02-2008, 08:19 PM   #16
EJ_ALLMOTA
Member
My Garage
 
EJ_ALLMOTA's Avatar
 
Join Date: May 2005
Location: Atlanta, GA
Posts: 1,613
Default Re: (JdMhEaD)

very clean ride.. i remember seeing in a few weeks back when i was in Bama for Import Face-off




__________________
GECKOSquad
flickr
EJ_ALLMOTA is offline Report Post   Reply With Quote
Old 06-02-2008, 08:23 PM   #17
A.C. Slater
Member
My Garage
 
A.C. Slater's Avatar
 
Join Date: Jun 2006
Location: Bayside, CA, U S A
Posts: 1,458
Default

Looks bitchin haha

but, why the black grill? totally kills the front end for me
__________________

Albert Squad FTW!

Spoon lip scrapin, spoon n1 screamin, spoon mirrors reflectin, spoon sw388's rollin, spoon wing downforcin spoon stickers stickin


A.C. Slater is offline Report Post   Reply With Quote
Old 06-02-2008, 08:23 PM   #18
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default Re: (EJ_ALLMOTA)

Thanks for the comments and pics. That was a nice show with some nice racing. I placed 1st in Import Wild.
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold
maxpsi is offline Report Post   Reply With Quote
Old 06-02-2008, 08:24 PM   #19
Chase
Senior Member
My Garage
 
Chase's Avatar
 
Join Date: Dec 2004
Location: EMAIL ME at ChaseBaysOnline@gmail.com
Posts: 10,162
Default Re: (EJ_ALLMOTA)

WOOOOOWWWWW This is sick dude, looks badass.

ALABAMA CAR
__________________
dAng! PG+K
EMAIL ME at ChaseBaysOnline@gmail.com | EMAIL ME at ChaseBaysOnline@gmail.com
Chase is offline Report Post   Reply With Quote
Old 06-02-2008, 08:32 PM   #20
ware
Member
My Garage
 
ware's Avatar
 
Join Date: Jan 2007
Location: So, Cal, U.S.A
Posts: 1,905
Default Re: (Chase)

color is amazing. Side shots ASAP!
ware is offline Report Post   Reply With Quote
Old 06-02-2008, 08:32 PM   #21
Mr.OB*GYN_Rhett
Senior Member
My Garage
 
Mr.OB*GYN_Rhett's Avatar
 
Join Date: Dec 2003
Location: The heart of cat bong
Posts: 24,342
Send a message via AIM to Mr.OB*GYN_Rhett
Default Re: (Chase)

Personally, would have kept it white, but your work is very good
__________________
WheelTrend.com-For All Your RimJob Needs.

Contact: Tech@WheelTrend.com
Mr.OB*GYN_Rhett is offline Report Post   Reply With Quote
Old 06-02-2008, 08:34 PM   #22
speedaddict
Junior Member
My Garage
 
Join Date: Feb 2002
Location: US
Posts: 321
Send a message via AIM to speedaddict
Default Re: (Chase)

love the engine bay...the shaving and sanding of the seam sealer looks killer
__________________
wēk´sôs ĭn'dustrēz :: 408-526-WEAK
http://www.speedaddicts.com
"its not jdm until you have a crooked sticker"
speedaddict is offline Report Post   Reply With Quote
Old 06-02-2008, 08:40 PM   #23
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default Re: (ware)

Quote:
Originally Posted by ware
color is amazing. Side shots ASAP!


Quote:
Originally Posted by speedaddict
love the engine bay...the shaving and sanding of the seam sealer looks killer
I wasn't comfortable messing with it and the brake lines like some people do with their tucks. Sanding the factory seam sealer was an afterthought once I got started on the bay at Automations. I wasn't really sure how it would turn out. Thanks for the comments.
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold
maxpsi is offline Report Post   Reply With Quote
Old 06-02-2008, 08:43 PM   #24
Paul1985
Junior Member
My Garage
 
Paul1985's Avatar
 
Join Date: Jul 2005
Location: Australia
Posts: 814
Default

Looks great!!!
__________________
My EG Build thread: Bay shave, paint, K24a etc.
http://www.honda-tech.com/zerothread?id=1717537
Paul1985 is offline Report Post   Reply With Quote
Old 06-02-2008, 08:44 PM   #25
maxpsi
Member
My Garage
 
maxpsi's Avatar
 
Join Date: Jan 2002
Location: Birmingham, AL, United States
Posts: 3,142
Send a message via AIM to maxpsi
Default Re: (Mr.OB*GYN_Rhett)

Quote:
Originally Posted by Mr.OB*GYN_Rhett
Personally, would have kept it white, but your work is very good
That was the original plan and without a shaved bay. But, I told myself if I was to spend the money, the paint better stand out. And, if I was paint it, I might was well shave the bay. It was a pretty enormous task for someone whose never welded or had to do body work.
__________________
2008 NBP Honda Fit
72 Camaro SS 350 Placer Gold
maxpsi is offline Report Post   Reply With Quote
Reply

Bookmarks

Tags
alabama, birmingham, blaze, car, civic, color, coupe, crystal, gold, honda, performance, placer, ppg, red, shaved, shops, tech, tucked

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -8. The time now is 11:08 AM.



2008 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.