Notices
Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

Exhaust Review: Tanabe Hyper Medallion on EG hatch

Old 05-13-2004, 11:51 PM
  #1  
Honda-Tech Member
Thread Starter
 
carsaregood's Avatar
 
Join Date: Dec 2001
Location: Huntington Beach, CA, USA
Posts: 803
Likes: 0
Received 0 Likes on 0 Posts
Default Exhaust Review: Tanabe Hyper Medallion on EG hatch

there seems to be not too much info/pics on this exhaust around, so i thought i'd make this post for reference.

EDIT: sound clips on page 2!!


Just picked up the exhaust. not the nicest box, but it'll do... i guess!


it came all nicely packed up, with genuine tanabe plastic bags and exhaust tip scuff protector.


the muffler is shiny. simple, straight cut non rolled big *** 4.5" tip


stock vs. tanabe cat back


hardware, gaskets, sticker, info papers


straight through muffler perforations


fishscale resonator


muffler welds


installed!


view from behind


I'll get some vids so you guys can hear it too soon. Its really deep sounding, and while not quiet, its definitely not loud either. I can barely hear it if i don't apply much throttle while cruising on the freeway.

I'm running a gsr motor and cat, so a very short extension (~3"-4") had to be fabbed up to get this catback to bolt on. There is a bottleneck as well, just after the cat, which really is unavoidable for a bolt on system. Also it is full stainless steel, and much lighter than the stock exhaust due to the thin walls. The piping is 60 mm diameter.

One bad thing: I had to cut the bumper where the tip sticks out. It was touching, and melting the bumper. I've spoken to one other member on ht about this, and his touches as well. sucks. it was easy enough to cut with a dremel though. I'll post a pic of where i cut it later on.


And just for ***** and giggles... i took my car into AEM a few weeks back so they could test fit one of their hybrid intakes, and it fits really well! They gave me a new lower tranny mount that is thinner for more intake pipe clearance. The guys there was really cool too, Jon and Tyler.






new brass colored mount.



Modified by carsaregood at 1:29 AM 11/9/2004
Old 05-14-2004, 12:06 AM
  #2  
 
marissio's Avatar
 
Join Date: May 2004
Location: Riga, Latvia, Latvia
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

Nice ride and your new exhaust
What was the price for the exhaust?
Old 05-14-2004, 12:08 AM
  #3  
Honda-Tech Member
Thread Starter
 
carsaregood's Avatar
 
Join Date: Dec 2001
Location: Huntington Beach, CA, USA
Posts: 803
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (marissio)

it was $479 at Group 5 motorsports. They usually sell it for $500 or something, but they will price match for you. I showed them the price at robear racing.
Old 05-14-2004, 12:35 AM
  #4  
svw
 
svw's Avatar
 
Join Date: May 2003
Location: San Diego, CA, US
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

that intake sucks! hahaha, get it? ...sucks...

but serisouly, its pretty cool, nice work. youre exhaust blows. ha. ummm, not funny, ok i'm out.


EDIT: lol! blows! that IS funny!


Modified by svw at 2:03 AM 5/14/2004
Old 05-14-2004, 01:09 AM
  #5  
 
Mar_DC2's Avatar
 
Join Date: Mar 2003
Location: UTAH
Posts: 1,073
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carsaregood &raquo;</TD></TR><TR><TD CLASS="quote">

fishscale resonator
</TD></TR></TABLE>

ouch...that looks pretty restrictive.
Old 05-14-2004, 04:35 AM
  #6  
Global Moderator
iTrader: (5)
 
Jimmy's Avatar
 
Join Date: Jan 2003
Location: Tennessee
Posts: 12,498
Received 2 Likes on 2 Posts
Default

Post this in the <FONT COLOR="red">Exhaust thread</FONT>
Old 05-14-2004, 05:02 AM
  #7  
 
Jmorin's Avatar
 
Join Date: Sep 2003
Location: East Cost
Posts: 472
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

Very nice,what is the retail price on that ?
Old 05-14-2004, 05:07 AM
  #8  
Honda-Tech Member
 
VRD^don's Avatar
 
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Jimmy)

nice..
Old 05-14-2004, 05:36 AM
  #9  
Member
 
degooser's Avatar
 
Join Date: Oct 2002
Location: CHEESE BALL, USA
Posts: 2,236
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

good info..wish i had 500 bucks to spend on an exhaust system... hopefully its quiet enough for our san diego police officers...
Old 05-14-2004, 05:38 AM
  #10  
Honda-Tech Member
 
silverEH2's Avatar
 
Join Date: Feb 2002
Location: Dallas, TX
Posts: 4,453
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

lookin good i wanna hear the sound clips
Old 05-14-2004, 05:50 AM
  #11  
Member
 
Lil Corb's Avatar
 
Join Date: Mar 2003
Location: NOVA, US
Posts: 1,090
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carsaregood &raquo;</TD></TR><TR><TD CLASS="quote">there seems to be not too much info/pics on this exhaust around, so i thought i'd make this post for reference.</TD></TR></TABLE>

So true.

Excellent review
Gets some vids up.
Old 05-14-2004, 05:52 AM
  #12  
Honda-Tech Member
 
Vero's Avatar
 
Join Date: Dec 2003
Location: DDMotoring, CT, USA
Posts: 3,616
Likes: 0
Received 0 Likes on 0 Posts
Default

looks good, that is a sweet exhaust no doubt.
Old 05-14-2004, 06:28 AM
  #13  
Honda-Tech Member
 
splitime's Avatar
 
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (Mar_EK)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mar_EK &raquo;</TD></TR><TR><TD CLASS="quote">

ouch...that looks pretty restrictive.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mar_EK &raquo;</TD></TR><TR><TD CLASS="quote">

ouch...that looks pretty restrictive.</TD></TR></TABLE>

Thought the same thing.. I'm more in this...

school of resonators.
Old 05-14-2004, 07:03 AM
  #14  
Honda-Tech Member
 
skip.two's Avatar
 
Join Date: Sep 2002
Location: Richmond, California
Posts: 8,938
Likes: 0
Received 1 Like on 1 Post
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

there is a reason why this thread was made.
https://honda-tech.com/zerothread?id=856670
Old 05-14-2004, 07:32 AM
  #15  
Honda-Tech Member
Thread Starter
 
carsaregood's Avatar
 
Join Date: Dec 2001
Location: Huntington Beach, CA, USA
Posts: 803
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (jL iLLuZiOnz 9)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jL iLLuZiOnz 9 &raquo;</TD></TR><TR><TD CLASS="quote">there is a reason why this thread was made.
https://honda-tech.com/zerothread?id=856670</TD></TR></TABLE>

i did post in there guys.

i also put a link from there, to here.

also if you read that post it says to put links for pics to cut down on the clutter.

also you can't be linked to pics that are hosted on imagestation.

thanks for the comments otherwise.
Old 05-14-2004, 07:53 AM
  #16  
Honda-Tech Member
 
STN_Pat's Avatar
 
Join Date: Feb 2003
Location: Quebec, Canada
Posts: 2,270
Likes: 0
Received 3 Likes on 3 Posts
Default

Nice !

You knew that magnaflow full ss mandrel cat back 2.25' with the one you dont have to cut your bumper cost 50% of this ? they even give you a test pipe, all gaskets and bolts, stickers and a limited lifetime warranty ?

I dont want to be an ***, i am just wondering why this instead of equal quality/even better for half the price.
Old 05-14-2004, 11:58 AM
  #17  
Honda-Tech Member
Thread Starter
 
carsaregood's Avatar
 
Join Date: Dec 2001
Location: Huntington Beach, CA, USA
Posts: 803
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (STN_Pat)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat &raquo;</TD></TR><TR><TD CLASS="quote">Nice !

You knew that magnaflow full ss mandrel cat back 2.25' with the one you dont have to cut your bumper cost 50% of this ? they even give you a test pipe, all gaskets and bolts, stickers and a limited lifetime warranty ?

I dont want to be an ***, i am just wondering why this instead of equal quality/even better for half the price.
</TD></TR></TABLE>

yes, i knew. I did a lot of shopping and comparing and thinking and considering, and in all honesty there is no quantifiable justification for the price difference. I went with this one because of other reasons, like sound level, looks/style, etc. What i especially like about this exhaust is the offset tip that helps tuck the muffler under the bumper.
Old 05-14-2004, 12:44 PM
  #18  
Member
 
Synergy001's Avatar
 
Join Date: Feb 2003
Location: Hawaiian Filipino in da rainy, Oregon
Posts: 2,905
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm the other guy on here that has this exhaust. The reason why I chose this exhaust is because I wanted the old school look (if you're a noob, you wouldn't know what I'm talkin about), the deep sound and the way it looks. The reason why I didn't save money and bought a cheap exhaust like magnaflow is becuase I HAVE THE MONEY to spend. Well anyways, here's a pic of it on my car.

Old 05-14-2004, 01:38 PM
  #19  
Honda-Tech Member
 
HATCHingMN's Avatar
 
Join Date: Sep 2003
Location: Honda city, MN, USA
Posts: 7,917
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Synergy001)

needs sound/vidio clip
Old 05-14-2004, 01:53 PM
  #20  
Honda-Tech Member
 
STN_Pat's Avatar
 
Join Date: Feb 2003
Location: Quebec, Canada
Posts: 2,270
Likes: 0
Received 3 Likes on 3 Posts
Default Re: (STN_Pat)

carsaregood : interesting answer, thanks for understanding my statement correctly.

as for you, Synergy001, Magnaflow exhaust are as good, not even better then the stuff you paid twice the price. I wish I could just show you the catback
Old 05-14-2004, 02:59 PM
  #21  
Darth ModerVader
 
Padawan's Avatar
 
Join Date: Jan 2001
Location: Mustafar
Posts: 11,539
Likes: 0
Received 1 Like on 1 Post
Default Re: Exhaust Review: Tanabe Hyper Medallion on EG hatch (carsaregood)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carsaregood &raquo;</TD></TR><TR><TD CLASS="quote">
fishscale resonator</TD></TR></TABLE>

I would definitely consider having this resonator replaced with a less restrictive, perforated-core design. The rest of the system looks good though.
Old 05-14-2004, 03:10 PM
  #22  
Member
 
Synergy001's Avatar
 
Join Date: Feb 2003
Location: Hawaiian Filipino in da rainy, Oregon
Posts: 2,905
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (STN_Pat)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat &raquo;</TD></TR><TR><TD CLASS="quote">carsaregood : interesting answer, thanks for understanding my statement correctly.

as for you, Synergy001, Magnaflow exhaust are as good, not even better then the stuff you paid twice the price. I wish I could just show you the catback </TD></TR></TABLE>

Oh by the way....I only paid $399 shipped. I think it was well worth it. I've had many custom exhaust setups before but never satisfied as I am now. I don't like the ugly bends that muffler shops do because at the bends the diameter of the piping gets smaller. Plus, its a lot more fun when you get to install your own exhaust. carsaregood tried to get the exhaust at the same price but they wouldn't budge.
Old 05-14-2004, 04:18 PM
  #23  
Honda-Tech Member
 
STN_Pat's Avatar
 
Join Date: Feb 2003
Location: Quebec, Canada
Posts: 2,270
Likes: 0
Received 3 Likes on 3 Posts
Default Re: (Synergy001)

Magnaflow Mandrel bent (not crush bent like you think) 2.25 inches diameter 100% SS mufflers are approx. 250$ USD shipped and fits as good as your tanabe.

Anyhow, gday
Old 05-14-2004, 05:01 PM
  #24  
Member
 
Synergy001's Avatar
 
Join Date: Feb 2003
Location: Hawaiian Filipino in da rainy, Oregon
Posts: 2,905
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (STN_Pat)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat &raquo;</TD></TR><TR><TD CLASS="quote">Magnaflow Mandrel bent (not crush bent like you think) 2.25 inches diameter 100% SS mufflers are approx. 250$ USD shipped and fits as good as your tanabe.

Anyhow, gday </TD></TR></TABLE>

but for $149 more...why not get a better brand. well anyways, its just like gettin rota c8's instead of mugen mf8 wheels. well its really up to your budget and preference. i dont know which exhaust is better unless they get dyno'd. but anyways....i wont regret how much i spent on this exhaust. its quiet and performs much better than stock.


Modified by Synergy001 at 2:22 AM 5/15/2004
Old 05-14-2004, 05:09 PM
  #25  
 
Turbod_Sohc's Avatar
 
Join Date: May 2004
Location: Laredo, Texas, USA
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
Default

True, but some of us don't have enough for mugens

Thread Tools
Search this Thread
Quick Reply: Exhaust Review: Tanabe Hyper Medallion on EG hatch



All times are GMT -8. The time now is 07:39 AM.