menkio

been looking around and could'nt find the topic, do they still sell the cam, and what are the specs on it. ?

menkio

ttt.

menkio

bah, nm calling now

menkio

bah, called 4 times, nothing each time or full mailbox...
delta has a re-grind y7, shrug

7thGear

if you get through can u aslo ask what the specs are for the Y8 camshaft? thanks

menkio

just tried for the 5th time.. lol.. im all set with this ****, tracking down delta as we speak

7thGear

i dunno 240 bux for a camshaft is pretty damn good

crower rapes you relentlessly compared to that,

plus delta's website is all messed up.

post up your results tho!! you have more determination than me

TiggsCRX

I haven't had any experience with Exospeed, but all I've heard is good stuff. Try to IM Wil, I think his username is like exospeedamcrx not 100% sure just do a user lookup for exospeed. He'll get back to you I'm sure. They must be really busy or something cuz I've heard they have great customer service

As for delta, I have their a6 272 cam as you can see in my sig. I like it so far, fighting idle issues right now but I'm not a real experienced tuner so I'll be at the dyno soon to get it tuned.

Delta's side doesn't have much info, just email em their email should be on the site. bah, here it is sales@deltacam.com

7thGear

ParrisEngineDynamics

If will's voicemail is full, it might mean that he has a ton of customers. His products are top notch and I think everyone can vouch for that. His turn around time is very fast. Sometimes emergencies come up. Imagine if you had to be gone one full day from your business due to whatever circumstances. Try back tomarrow because that is usually not like him. Then again you can always go to delta and settle for a more inferior product. Just my thoughts. If I had to buy rods and I couln't get through to cunnignham, I guess I will just call Eagle instead hahaha

ExospeedAMcrx

sorry guys if we miss your call. its hard to keep up with the messages and the phone ringing all day long.

anyways. the Y7 cam, we have 2 stages.
stage 2: street/race dur int 268 exh 254 lift int 396 exh 325

our wilder stage 3 is dur 274/258 lift 396/396

menkio

how much for the stage 2 ?

7thGear

are those advertised durations or at 0.050?

also the lift seems kind of low... or is yours measured differently


also what are your specs for the y8 cam? thanks. Also since you guys regrind them anyway, could i just ask you to "bump it up" a little bit upon order?

thanks

ExospeedAMcrx

our specs are at .010

the y7 cams are $200 with core exchange.