installing cam gears
10-22-2003, 08:45 PM
#1
Thread Starter
Join Date: Sep 2003
Location: san francisco, ca
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
installing cam gears
how hard is it to install cam gears on a b-series engine? will there be much gain from it. i got a few hundred to spend, and was either thinking of cam gears or a lighter flywheel...any suggestions would help thanks!
10-22-2003, 09:25 PM
#2
Junior Member
Join Date: May 2003
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing cam gears (GT-KiLLa)
cam gears with your mods would probably add some nice whp but a exedy 9.8 pound flywheel is a great mod that can be done for cheap around 250 or so.. its up to you but i have no regrets on my flywheel
10-22-2003, 09:40 PM
#3
Mad Scientist
Re: installing cam gears (vtecmike1)
you have your block decked and your head milled and no camgears?defenetely get cam gears and get them tunned...with your mods; more important than the flywheel.
10-22-2003, 11:46 PM
#5
*Bounty Hunter*
Join Date: Nov 2002
Posts: 3,131
Likes: 0
Received 0 Likes
on
0 Posts
10-23-2003, 05:47 PM
#6
Thread Starter
Join Date: Sep 2003
Location: san francisco, ca
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: (94BlackCivicEX)
thanks thats a great link. but just wanted to know do i have to remove the entire camshaft in order to change the cam gears? can i just remove the valve cover and un bolt the cam gears off??? have anyone changed their cam gears?
Trending Topics
10-24-2003, 11:06 PM
#8
Darth ModerVader
Re: (GT-KiLLa)
No need to remove the cams, but you will need to loosen the timing belt. Also keep in mind that you'll need dyno tuning to see any gains from adjustable cam sprockets - they aren't just a "bolt-on" part.
Thread
Thread Starter
Forum
Replies
Last Post
