Non VTEC B18B1 EG 1/4 times ?
#2
Re: Non VTEC B18B1 EG 1/4 times ? (project dc2)
i have a buddy who went 15.03 dont remeber the mph but his was an si, all stock except the motor(b18b)tranny(ls) and a greddy cat back, hope this helps, they say thet the ls and b16 should run very simmilar in the 1/4 mine runs 14.4 and 96mph in a cx hatch i/h /stcok exhaust
#4
Honda-Tech Member
Join Date: Jun 2001
Location: Nor*Cal
Posts: 6,097
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (BALL BAG)
First and only time at the track so far I ran was a 15.3xx 89 almost 90MPH trap speed with b16 tranny, 2 1/4-inch piping. No intake or header. 2.4 60's on Kumho Ecsta 712s. I have a 93 DX hatch.
#5
Honda-Tech Member
Join Date: Jun 2001
Location: Nor*Cal
Posts: 6,097
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (richierich)
also forgot to mention my timing was at 12 degrees, LOL. Now it's fixed and is at around stock 16 degrees. Hopefully next time I will be able to hit high 14s'.
Rich
Rich
#7
Honda-Tech Member
Re: Non VTEC B18B1 EG 1/4 times ? (b16turbohatch47)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16turbohatch47 »</TD></TR><TR><TD CLASS="quote">i have a buddy who went 15.03 dont remeber the mph but his was an si, all stock except the motor(b18b)tranny(ls) and a greddy cat back, hope this helps, they say thet the ls and b16 should run very simmilar in the 1/4 mine runs 14.4 and 96mph in a cx hatch i/h /stcok exhaust</TD></TR></TABLE>
Why people think the LS and the B16 are similar in the 1/4 mile is, and will always be, a mystery to me. One of my friend is running a B16A2 out of a Del Sol in his 93 VX hatch. He has 3" exhaust (going turbo) and no other mods. Stock down to the intake and header. Engine has 100k miles on it also. He is turning 14.3 @ 98mph on streets. I wouldn't expect much more then high 14's out of an LS engine in the same chassis.
Why people think the LS and the B16 are similar in the 1/4 mile is, and will always be, a mystery to me. One of my friend is running a B16A2 out of a Del Sol in his 93 VX hatch. He has 3" exhaust (going turbo) and no other mods. Stock down to the intake and header. Engine has 100k miles on it also. He is turning 14.3 @ 98mph on streets. I wouldn't expect much more then high 14's out of an LS engine in the same chassis.
Trending Topics
#8
Honda-Tech Member
Join Date: Jul 2003
Location: sac
Posts: 8,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (project dc2)
my friend ran a 14.49 in a 93 DX on 16 inch enkei's 95 LS I/H/E AEM Cam Gears, Clutch Specialty CLutch/ Flywheel, Nology Wires /AEM FPR / AND RAIL 45 PSI/ he had nitrous but never ran it at the tracks becuase the pit check didnt let him he didnt have the nitrou drop down or someshit but im guessin like 13.6 / a 60 shot cause he ran a turbo 96 CIVIC ls turbo and the civic ran a 13.8 at the track previous. they ran illegall and the hatch barely beated the CIVIC but it won.
#10
Honda-Tech Member
Re: Non VTEC B18B1 EG 1/4 times ? (HybridcivicLS-T)
read my sig for the details...15.8..Beat two 94 mustang automatic GTs last week..hehe..my first domestic kills..i know i know..94 GTs are slow..especially the automatic ones..but oh well..
Khoi
Khoi
#13
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (project dc2)
93 civic coupe DX with bone stock LS motor, filter on the throttle body due to lack of stock intake. skunk2 cam gears that arent tuned, ITR B-pipe, straight pipe, gsr muffler. runnin on 15' 205-50R15 yoko avs es100's
2.462 60' foot
ET- 15.523 @ 89.819 MPH
if i get my 60 foots down to 2.2 it'd be good for 15.1's or so. its ok !! more practice
2.462 60' foot
ET- 15.523 @ 89.819 MPH
if i get my 60 foots down to 2.2 it'd be good for 15.1's or so. its ok !! more practice
#14
Honda-Tech Member
Join Date: Jun 2002
Location: Bossier Shitty, LA
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (project dc2)
I ran a 15.0@93mph.....better traction and i'll be in the 14s!
#15
Honda-Tech Member
Join Date: Jun 2003
Location: Huntington Beach, CA
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
Re: Non VTEC B18B1 EG 1/4 times ? (95hbMatt)
my buddy Trooper has a 92 si with a stock bottom end b18b, milled head (.050), some broke *** old school gude cams, clutchmaster stg 4, b16 trans and the JDM replica DC ceramic header 2.5 in collector with beat down 2.25 sebring muffler.... went 14.0 twice on Falken Azenis at Pomona.
#16
Re: Non VTEC B18B1 EG 1/4 times ? (richierich)
440 cc DC headers allway back no cat 3 inch exit
16.9. with radials at 79mPH just wendsday 1at time out a track and I sent it 7g shift all way
97 civic Hx just driver seat in it
16.9. with radials at 79mPH just wendsday 1at time out a track and I sent it 7g shift all way
97 civic Hx just driver seat in it
Last edited by Emanuel Rivera; 08-30-2020 at 01:22 PM. Reason: mis spell
Thread
Thread Starter
Forum
Replies
Last Post
wm5holla
All Motor / Naturally Aspirated
75
10-25-2003 06:12 PM