Cam Seal Replacement Install Guide
#1
Member
Thread Starter
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Cam Seal Replacement Install Guide
Well most people know that the stock older version of the exhaust cam seal on our motors sucks *** and are a common cause of leakin oil. My car had this problem and to solve it, I ordered a Golden Eagle cam seal from motormatrix.com in the best buy forum and consequently wrote up an install guide for it to help anybody else who may be interested in doing this.
I know that team-integra has an article up about this... but I think mine has better pics. hehe... and its on a B18B1 motor!
I thought this one would be good for the archives as well.... here ya go guys.. hope u find it helpful.
Just go to the "DIY" section of my site.
My Site
PS feel free to make any comments or suggestions.
-Eric
I know that team-integra has an article up about this... but I think mine has better pics. hehe... and its on a B18B1 motor!
I thought this one would be good for the archives as well.... here ya go guys.. hope u find it helpful.
Just go to the "DIY" section of my site.
My Site
PS feel free to make any comments or suggestions.
-Eric
#6
Member
Thread Starter
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Seal Replacement Install Guide (bunmango)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bunmango »</TD></TR><TR><TD CLASS="quote">looks good... now hurry up and install that Neuspeed strut bar!</TD></TR></TABLE>
hahah actually i have.. i just didnt do the write up hahaha....
oh and here is a finished pic of the cam seal that i just added to the site
hahah actually i have.. i just didnt do the write up hahaha....
oh and here is a finished pic of the cam seal that i just added to the site
#7
Member
Thread Starter
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Seal Replacement Install Guide (pdcdragon)
for those that were interested in getting this... here is the link to the post in the best buy forum https://honda-tech.com/zerothread?id=446754
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2001
Location: Fort Worth, TX, USA
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Seal Replacement Install Guide (pdcdragon)
I just coat the sucker with liquid gasket and never have any problems. Although your right the older kinds do kinda suck. The newer ones, like what come in the B20 are much beefier.
#9
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: Cam Seal Replacement Install Guide (Westrock2000)
I think you should have coated the entire seal all the way around w/ hondabond. Otherwise looks good.
I got the newer OEM seal which is platic w/ o-rings on it instead of fully rubber w/o o-rings.
I got the newer OEM seal which is platic w/ o-rings on it instead of fully rubber w/o o-rings.
#10
Member
Thread Starter
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Seal Replacement Install Guide (PatrickGSR94)
I was thinkin about it... but the OEM one i had in there didnt have any on it. so i didnt... but if it does leak.. i'll crack it open again and redo it. But honestly, the rubber seals are so much bigger than the nonexistant stock ones that i'm not too worried about it. Plus i applied some hondabond to the inside area around the cam seal just not so much in the middle.
Thread
Thread Starter
Forum
Replies
Last Post