rizzuto_usmc

I have a 1995 honda civic ex with abs and I recently replaced the brake booster because the pedal was very hard to push but after replacing it and bleeding the brakes the pedal is still hard. Could the master cylinder possibly be bad?

jdmh22eg2

replace your booster check valve(if it is there) if its not there then there is your problem.

TripleLude

Make sure the check valve is not on backwards. Basically, you have taken the power out of the power brakes. Vacuum air from the intake manifold provides the power.

tony_2018

You guys have a picture of this check valve?

TripleLude

Something similar to this:



I put one on backwards on my Prelude and it didn't have power brakes. After swapping the position back, it had power brakes again.

vitamin_c95

follow the main booster hose. I think its about a foot from the booster. The plastic valve

rizzuto_usmc

replaced the check valve and it fixed it. thanks.