95accord-R

Can i take a V6 accords 5 lug hub and put it on my 2001 accord which has 4 lug?

95accord-R

i have all the suspension, steering, and brakes parts from the accord V6

Fitz Williams

iTrader: (1)

I know the rear's are the same. Honda lists the same part number for the front knuckles. It should work.

ncoutlaw

Yes you can

95accord-R

ok thanks guys

95accord-R

what about the driveshafts are they the same

Nathan007

I just did the conversion last week, and assuming you already have rear disk brakes, it's fairly simple.

You will need:

rear v6 hub bearing assy, rear disks (may reuse calipers and pads)
front v6 hub, new bearings, v6 calipers, v6 discs and pads(bigger than 4cyl)
Dorman makes fairly priced hubs it's what i used.

do a search, there's a few DIY about it.

axles will fit without issues btw

95accord-R

ok thanks

Camilo Mejia

[QUOTE=Nathan007;48699281]I just did the conversion last week, and assuming you already have rear disk brakes, it's fairly simple.

You will need:

rear v6 hub bearing assy, rear disks (may reuse calipers and pads)
front v6 hub, new bearings, v6 calipers, v6 discs and pads(bigger than 4cyl)
Dorman makes fairly priced hubs it's what i used.

do a search, there's a few DIY about it.

axles will fit without issues.

i know this thread is old but its worth a try can the same be done with a 99 accord lx 2.3l? Just switch hubs on front and change rear knuckles to a disk n 5 lug???

schreps

If it works on a 2001 it will work on a 1999. All the same suspension.

92eglsvtecutah

it should work