98-99 CL & 98-02 Accord OBD2B ECU pin-out
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2000
Location: NY/NJ
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
98-99 CL & 98-02 Accord OBD2B ECU pin-out
This is a OBD2B ECU Pin-out for the 98/99 Acura 2.3 CL, should be exactly the same for 98-2002 4cyl Accords.
mike
mike
#6
Re: 98-99 CL & 98-02 Accord OBD2B ECU pin-out
my problem is this manual connector at shock tower does not match
manual connector has 7 pins and auto has 12 pins which i found a few and am stuck
these wire left out maybe VSS wire in this cause that does not work reverse lights dont work and vtec i think i need help i prefer learning to help my self so i can help others so i chose DIY with help from others
#7
Re: 98-99 CL & 98-02 Accord OBD2B ECU pin-out
Great thread thank you.
After many parts replacement (TPS, MAP, Injector, distributor, plug, plug wire, compression test and some more) today I found the culprit is an intermittent issue on middle-green white cable on MAP socket.
Question: can I safely rewire both 1. from MAP socket to body ground and 2. From ECU pin to body ground?
Thank you.
Accord S84, 2001 Matic
After many parts replacement (TPS, MAP, Injector, distributor, plug, plug wire, compression test and some more) today I found the culprit is an intermittent issue on middle-green white cable on MAP socket.
Question: can I safely rewire both 1. from MAP socket to body ground and 2. From ECU pin to body ground?
Thank you.
Accord S84, 2001 Matic
Trending Topics
#8
Re: 98-99 CL & 98-02 Accord OBD2B ECU pin-out
my problem is this manual connector at shock tower does not match
manual connector has 7 pins and auto has 12 pins which i found a few and am stuck
these wire left out maybe VSS wire in this cause that does not work reverse lights dont work and vtec i think i need help i prefer learning to help my self so i can help others so i chose DIY with help from others
Hey man I know this thread is over a year old, but I'm such at the same spot as you were. I'm trying to swap harnesses in a 97 to the harness used on a f23a1 but don't see any pin outs for those two grey connectconnector information on your solution would be greatly appreciated
97 style plugs newest the fuse box
97 Again
98-00 ish that fit f23a1 harness
F23a1 plugs
Any help would be greatly appreciated, I posted this question in my thread I started when I first began this swap journey. Like I said any information would be appreciated.
Last edited by Taylor Woollen; 09-08-2021 at 04:33 PM. Reason: Added pictures
#9
Re: 98-99 CL & 98-02 Accord OBD2B ECU pin-out
Hey man I know this thread is over a year old, but I'm such at the same spot as you were. I'm trying to swap harnesses in a 97 to the harness used on a f23a1 but don't see any pin outs for those two grey connectconnector information on your solution would be greatly appreciated
97 style plugs newest the fuse box
97 Again
98-00 ish that fit f23a1 harness
F23a1 plugs
Any help would be greatly appreciated, I posted this question in my thread I started when I first began this swap journey. Like I said any information would be appreciated.
97 style plugs newest the fuse box
97 Again
98-00 ish that fit f23a1 harness
F23a1 plugs
Any help would be greatly appreciated, I posted this question in my thread I started when I first began this swap journey. Like I said any information would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post