1995 honda accord ex 2.2 vtec
#1
Honda-Tech Member
Thread Starter
1995 honda accord ex 2.2 vtec
I think my engine is a f22b1. ik its a vtec. I found a camshaft on bisimoto, http://bisimoto.com/store/index.php?...roducts_id=287. I was looking into getting it, it says that its best with there valve springs and cam gears. How many cam gears? I am guessing one. I found http://bisimoto.com/store/index.php?...roducts_id=157 for the gear and http://bisimoto.com/store/index.php?...roducts_id=283 for the springs. i already have a vold air intake installed and am waiting on headers. I am looking at a skunk2 throttle body. If I were to get all of these installed, the springs, cam, gears, throttle body, and headers along with my cold air. would I expect a gain in power? If so, how much roughly? any ideas on what to upgrade after?
#3
Re: 1995 honda accord ex 2.2 vtec
Yes, your F22B engine only uses one cam gear and with the components you have listed, along with a good tune, you will experience a very nice bump in power and is a great start for your project. However, horse power numbers can vary depending on the health of your engine, proper installation of your performance parts and how well you car is tuned. If you have further questions of Bisimoto products and services, kindly give us a call at the number listed in my signature and I will gladly help you out with your project.
#4
Honda-Tech Member
Thread Starter
Re: 1995 honda accord ex 2.2 vtec
That is a great help, thank you. Would an engine rebuild before be very benefitial? Has about 171k miles. Also its an automatic, where would i get it tuned?
#5
Re: 1995 honda accord ex 2.2 vtec
i see you found the goody store! id say YES rebuild it get, also talk to Julio about a piston and rod combo pack! he has helped me out in all of the questions possible i have asked with no problem at all! and like bisi says F ur K
#6
Re: 1995 honda accord ex 2.2 vtec
i see you found the goody store! talk to Julio he will help you out in any way he did me witl all respect in the world! yes a rebuild should be done also see if there is any specials on some pistons and rods they will help alot with the top end parts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nikos
Tech / Misc
14
04-27-2004 10:22 AM