Can I remove the plastic behind the cam gears?
#1
Honda-Tech Member
Thread Starter
Can I remove the plastic behind the cam gears?
B18b1, bent the **** out of it, Can I remove it without problems? I think yes. Also, when installing the head gasket, which way do
The indents around the coolant and oil passages face, the block or head? The gasket has no markings.
Thanks
The indents around the coolant and oil passages face, the block or head? The gasket has no markings.
Thanks
#2
Honda-Tech Member
Join Date: Feb 2011
Location: New zealand
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can I remove the plastic behind the cam gears?
it's fairly only one way fit's. there is a part of the gasket that has number's on the bottem left hand side.
they should be faceing up. there is also a UP mark on the gasket that should be on the exhaust side.
and yeah you can remove the timing cover's but if something was to get stuck in there you could have big problem's
they should be faceing up. there is also a UP mark on the gasket that should be on the exhaust side.
and yeah you can remove the timing cover's but if something was to get stuck in there you could have big problem's
#3
Honda-Tech Member
Join Date: Feb 2011
Location: New zealand
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can I remove the plastic behind the cam gears?
the bit were i said there are number's, im gessn it's a multi layerd steel gasket.
they are on the secound part of steel on the gasket. if you have them make sure they are
on the left hand side faceing up
they are on the secound part of steel on the gasket. if you have them make sure they are
on the left hand side faceing up
Thread
Thread Starter
Forum
Replies
Last Post
hatchet_honda
Honda CRX / EF Civic (1988 - 1991)
1
09-10-2010 05:17 AM
boosted ek
Honda Civic / Del Sol (1992 - 2000)
6
06-27-2005 07:01 PM