dwkt

So my passenger side inner fender doesnt have a liner so I picked one up brand new, got all the plugs, and was wondering if I will be able to install this without removing the wheel?

EsotericImage

iTrader: (8)

canadaek

you can but it's way easier with it out of the way

apexi_rsx

with the car jacked up there's no way u cant get ur hand in there and put those clips in with the wheel sagging

dwkt

Im in Canada so its kinda cold right now. I have a jack I just dont feel like removing my wheel and putting it back on in the cold. so if i jack the front end up I should have no problem installing it, thanks guys.

ps. EsotericImage, why would I make a thread to troll?

dave_f

It will be a hell of a lot easier if you take off the wheel man

NOFX

Since you're jacking the car up anyway, I'd just go ahead and remove the wheel. It's so easy, especially at that point. It would really make things easier on yourself.

EsotericImage

iTrader: (8)

because the installation is so simple that this shouldnt really be a thread. Even if you took the wheel off, it takes 5 minutes.

dwkt

kk you all have persuaded me to remove the wheel

Axatax

Much easier w/o the wheel, but the fender liners can be removed without even jacking the car. Just need an offset screwdriver and some dexterity.