FliiBoii

Hey whats up homies, im looking foward on getting info about a 5 lug conversion. What are necessary needs? Where can i purchase this? What are goods and bads on this conversion?

I mainly wanna go 5lug because of the wheels. I rarely find any nice wheels above 15's that are nice. Please help. I appriciate the help, thank you.
-XA

kkwick

search homie, there are some pretty good write ups on 5-lug conversions already.

grumblemarc

iTrader: (4)

Conversion on what? You didn't list any car details.
Here's a Google search for all of H-T using the keywords 5 lug conversion civic.
http://www.google.com/search?hl=en&l...nversion+civic

FliiBoii

Ohh Man Thanks, Sorry its a 99 Em1 Civic Si.

Hidenplanvew

homie.. hahaha im done

94eg!

iTrader: (2)

You will want a swap from either 98+ CTR or any US ITR. The JDM ITR 5-lug has different/larger axle splines in the front. You would have to change your outer CV joints to use them (or swap out to the US hubs and get new wheel bearings).

Given the same offset of rim, the conversion will push each wheel out by 5mm in the back and 7.5mm in the front.

Other than that, it should bolt on I think.

redsidriver

buy everything brand new from acura for best results .you can reuse your front knuckles and buy the rest for around 2500 to 3000

92lxsleeper

http://www.hmotorsonline.com/shop/wh...php?prodID=244


then just buy wheels. they also have CTR wheels for $600

98civdx

Your high.

5 lug normally goes for around $1000

Why the hell would ever spend 2500-3k for 5 lug?! That is just stupid.

grumblemarc

iTrader: (4)

And wheels for half that.

98civdx

I had the chance to buy 5 lug, with ctr wheels for 1050. Brand new tires, pads,rotos,front wheel bearings.

This is just to give you a hint for what stuff goes for.

redsidriver

no im just picky . I bought 2 used sets and i just was not happy with the condition of the conversions . The calipers looked like crap and rotors were heavily rusted . The studs also needed to be replaced .i do not regret it one bit . my 5 lug is brand new and will last a very long time

98civdx

You could have fixed the issues and still be left with money in your pocket. but, to each his own.

I do know you mean though, I bought 99 SI breaks, and dumb *** me didn't check the calipers. Low and behold, all 4 are frozen, and front bearings are shot.

I knew better, and still didn't look.

Even then, I only paid 250, for EVERYTHING under the car, and sold some stuff to be at about $150-175 in it total. The front sway bar/lcas are worth that.

Jason P

i have a 98 itr 32mm complete 5lug hub conversion with gun metal itr rims with 195.50.15 tires. pm me $1300

redsidriver

pics are not good and i didnt take many but a used kit would not have looked as good as this .

HeikDiesel

If you are really that concerned, do what I did. Buy a bushing kit, press it in, replace the rotors, good to go. No reason/need to spend 3g's on that. That's crazy

FliiBoii

Hey thanks mann, i appriciate it so much!!
this is all i will need for the conversion correct?