nitro911

So like the title states my turn signals do not work but when I use the emergency flashers both of them work. All the fuses have been replaced with new ones so I'm not sure where the problem lies. I'm thinking it has to do with the wiring. If anyone knows what to do or where a wiring diagram is at it'd be much appreciated. Also I'm not sure if this is related but my reverse lights do not work either and the bulbs have been replaced with new ones. So any help would be great Thanks.

riceordie

Check your wiring and also check to make sure your lever for turning your turn signals on is hooked up correctly

nitro911

All the other lights work, and all the fuses are new and working as stated.

nitro911

bump

Former User

If you hope to get useful replies, then provide all pertinent information about your car and engine:

JDM8o9

flasher relay

Former User

If this were true, neither the blinkers or hazards would work, right?

nitro911

I would assume so. But my hazard lights do work and all fuses have been replaced with new ones. So I'm thinking a short somewhere then? I don't know though.

kyosoeg6

iTrader: (7)

i have a feeling the plug or clip just behind the steering wheel is loose but not to a point to where u can see it. unplug it and plug it back in. see if that does anything

apexi_rsx

make sure ur connection by the plugs are good they tend to short out on eks alot i have took a couple extra harness's from junk yards because mine have been starting to pull apart on me.