Vito5790

I plan on making a minimum of 400whp

Here's what i got so far:

F22b2 (non vtec)
Ported and polished head and plenum
Arias 9:1 86mm
Rods form Bisimoto
Pro valve springs and retainers also from Bisimoto
RC 750cc injectors
Fidanza 8lb flywheel w/replaceable clutch surface
ACT clutch
King bearings



Still to come:

Stage 2.4 cam and cam gear from Bisimoto
AEM fuel/ignition controller
KOYORAD radiator w/53mm core
Stainless or titanium valves
Wallbro 255
Limited slip kit from phantom grip

As far as the turbo setup goes, I don't have a plan yet so I'm open to suggestions

What do you think about the looks of this one? The bumper and headlights will be like ones in this pic but every thing else will probably be different.

nus_dogg

Sounds like a legit setup bruh. Keep us posted!

19Accord97

Nice! Can't wait to see it done :D

Vito5790

Thanks! I can't wait to get it done my self! lol Unfortunately my budget is slowing me down...

Vito5790

Is importperformanceparts.net a legit site? Just wondering because i was looking through it and found quiet a few parts i would like to get from them.

19Accord97

No idea. I have used horsepowerfreaks.com before and they are awesome. They run monthly specials usually if youre on their e-mail list.

Vito5790

Toga high volume oil pump finally came in. Really glad i found one. Almost gave up on looking for one.

wolfy47

nevermind....i had a silly question

cant wait to see it when its finished

Vito5790

I tried posting some pics but couldn't figure out how.

MAD_MIKE

If you scroll down to Manage Attachments you can upload a picture from your files, or upload/hotlink the picture if its on a website via the address.

Vito5790

Some pics of the parts i got so far.
And Mike, thanks.

nus_dogg

Nice.

Vito5790

Does anyone know where i can get an aftermarcket intake and throtle body that will work with f22b2

Vito5790

Finally got bottom end put together and block painted

HonBeer

Why on earth would you paint the block?? Paint hinders cooling. And it looks shitty also.

Java^FiT

oh man, your plan kind of makes me wish i diddnt sell my 97 lx

Vito5790

Thanks man. But there's lots of other plans out there that are better then my

GhostAccord

Looking good! keep'er going.

Just out of curiosity what is the volume that HV oil pump is rated for?

Vito5790

That i don't know. All i know is that its more than stock and the only 1 i could find. I got it from importperformanceparts.net

Vito5790

I had to put stock valves in just so i can drive it at least till i save up some money for the rest of the parts.

bigsnorlax

Looking very good so far! Ignore the haters... i like painted blocks ha.

Do you know what route your going as for as an EMS or tune?

And what turbo are you thinking about running?

Looking good though man, looks solid, and not everyone else's slopped together F turbo "build."

Andryzzle

Venom used to make an IM if you can find one (look for the Acura CL). The f23 IM is an oem upgrade you can pursue also. There is a little custom work for the f23, but less than other options.

Vito5790

Thanks Guys!

As far as ems goes i plan on getting a fuel/ignition controller from AEM. Its kinda like a pigieback for the factory ems. You can run injectors straight from it or it can control them through the ems. I looked at the install instructions and it interupts the inputs from the crank, cam, map and tps scensors and it uses them for maping or modifies those inputs which are then sent to the ems. Thats how i understand that, may be different though. As far as turbo goes, I will get one of those cheep ones from ebay first. and when i save up enough money i will upgrade to ether a turbonetics or garret or maybe even something else.

accord_raffi

You should just get your car tuned with software and ditch the piggyback. It's going to use the input from those sensors to increase fuel, but then you're going to end up with huge timing issues and everything's going to go boom. Go to a tuner.

accord_raffi

You should just get your car tuned with software and ditch the piggyback. It's going to use the input from those sensors to increase fuel, but then you're going to end up with huge timing issues and everything's going to go boom. Go to a tuner.

You can skip on the LSD if you're short on cash and put that towards a tune. What kind of power are you looking to make? I was going to say go with a t3/t04e 57 trim until I saw you had some beefy engine mods planned. Ask your tuner once you find him.