jsinher3

im doing a mpfi swap on my 91 civic dx and had a few questions;
does anybody know where i can find the vac hose diagram for the si intake mani?
do i need a si distributor or can i just use the one i have?
do i need a si throttle body cable or can i re use the one i have?
sorry if these answers have been asked i tried searching but i cant seem to get the answers im looking for.

Mr.Cheezil

Here is a list of everything that you will need. GL
http://hondacrx881.tripod.com/mpfiswap.html

jsinher3

i checked the site out but i just want to know if its really needed or can i reuse what i have

jlicrx

you need the distributor from 88-91 CRX Si or HF, 88-91 Civic Si or EX - can't use the DPFI distributor

although it looks a little cleaner to use the Si throttle cable, you don't have to use it - you can use the DX cable by just looping it out around the strut tower

here is 89-91 (not 88) Si vacuum diagram:

KINGVEM^^ED6

iTrader: (1)

dont reuse ur dx cable just get a si one there cheap

jsinher3

thanks quick question.. if i decide to keep the dx distributor would the car still function the reason why im hesitating in getting the si distributor is because im not keeping this motor im just trying to get the wiring done and get it 100% running right for when i drop my b20 in...

dephtone

No you cannot use the DPFI distributor. The DPFI distributor does not have some of the sensor the MPFI ECU needs for the car to operate properly.

jsinher3

okay thanks does anybody know what other distributor i can use besides the 91 si i think its stamped td02..

KINGVEM^^ED6

iTrader: (1)

u can use a obd0 ls one but only one bolt will line up

jsinher3

does anybody else know if this will work? again all i want to do is make sure the wiring is done right and everything will function correct when i drop the new motor im not keeping the d16 and im not using this as my daily driver so that is why im trying to avoid ditching 120 up for a si dizzy...

BiG ChOr!Zo

iTrader: (1)

td-18u

KINGVEM^^ED6

iTrader: (1)

it will work iv personally ran it cuz the mpfi dizzy i got was shot

jsinher3

do you know the distributor stamp code for the obd0 ls dizzy?

jsinher3

can i use a obd1 converted to obd0 dizzy?

4drEF

How do you do that?
You can't just swap plugs.. it won't work. The reluctor wheel in the dizzy has a different tooth count and will send the ECU the wrong signal.

jsinher3

thanks for letting me know that..

does anybody know how i can tell is a dizzy is from an 91 si or not im trying to buy one of someone but hes not sure if its off a si or not and cant find the stamp code td02u on it, can you tell by the electrical pins in the plug or something??

BiG ChOr!Zo

iTrader: (1)

it will be stamped with either td-02u or td-18u on one of the metal arms...!!!

jsinher3

he cant find it, its not on the legs he cleaned it and couldnt find the stamp it must have just fadded with time..

BiG ChOr!Zo

iTrader: (1)

td-o1u-will have a small square clip

td-02u & td-18u-will have a bigger round clip

ktay1990

what about if i have an msd pro cap dizzy?