Notices
Honda Accord (1990 - 2002) Includes 1997 - 1999 Acura CL

2001 Honda Accord metal grinding

Thread Tools
 
Search this Thread
 
Old 01-18-2011, 05:13 AM
  #1  
Trial User
Thread Starter
 
fluturm's Avatar
 
Join Date: Jan 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 2001 Honda Accord metal grinding

I have a 2001 Honda Accord V6 EX 4-door(Sedan) and this morning when I pulled out of the garage I heard a horrendous metal grinding noise. It was loud and sounded as though I was dragging a piece of metal underneath my car. It made the noise reversing out of the garage and I slowly drove forward and the noise continued. I looked underneath the car multiple times to see if I was dragging anything and their was nothing. I popped the hood to check the belts and everything seemed fine (it idled without any abnormal noises). So the grinding continued until I left the parking lot and accelerated to 20-25 mph and than ran normal. I went to work for a couple of hours and let the car sit and testing it by driving around the parking lot and it ran just fine. I live in Michigan so I am thinking the cold, sporadic weather may play a roll. My car stays in a garage overnight and sits out in the cold weather during the day when I am at school and work. I talked to a friend who suggested that it may be the clutch just rubbing due to the shift in cold damp weather to my garage at night. Any ideas? Should I get this checked out immediately? It only happened once thus far, I just don't want it to become a bigger issue if unattended.

Other info: I do not believe it is the brakes or rotors because I changed those this summer, also the car has around 150,000 miles on it.
Old 01-18-2011, 06:18 AM
  #2  
Honda-Tech Member
 
nus_dogg's Avatar
 
Join Date: Oct 2008
Location: St. Paul, MN
Posts: 3,728
Received 7 Likes on 6 Posts
Default Re: 2001 Honda Accord metal grinding

Huh. Odd.
Old 01-18-2011, 06:39 AM
  #3  
SHAME ON YOU REBECCA!
 
kidcool1977's Avatar
 
Join Date: Mar 2007
Location: My house.
Posts: 1,676
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

brakes maybe
Old 01-18-2011, 06:54 AM
  #4  
Honda-Tech Member
 
dansaleen_04's Avatar
 
Join Date: Jun 2005
Location: port richey, FL, usa
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

have they been throwing salt down on the ground? whats the weather like a lot of snow down? it could be the brakes. your talking about heated brakes when driving, salt on metal, then sit and cool together in the garage overnight. just because you changed the brakes doesnt mean it isnt that. but it also doesnt mean the brakes are damaged either. just that because of the conditions of the streets and weather it can cause problems.
Old 01-18-2011, 07:43 AM
  #5  
Trial User
Thread Starter
 
fluturm's Avatar
 
Join Date: Jan 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

Yes there has been plenty of snow on and off and salt is put on the roads to clear them. So if salt is the problem you think it is salt between the rotors and pads? If so, will I need to replace them again if the problem persists?
Old 01-18-2011, 08:13 AM
  #6  
SHAME ON YOU REBECCA!
 
kidcool1977's Avatar
 
Join Date: Mar 2007
Location: My house.
Posts: 1,676
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

I am betting you're caliper or calipers are locking up, to check lift the front end put vehicle on jack stands and look for any signs of of your tires not spinning freely.

I had this happen to me it would happen intermittently until the inner side of the pad was bare metal causing metal to metal scrape.

I have heard people saying there wheel or rotor IIRC would glow red hot because of dragging calipers.
If this is your issue your brake lines are bad.

Anyway something to ponder.

Last edited by kidcool1977; 01-18-2011 at 08:43 AM.
Old 01-23-2011, 05:04 PM
  #7  
Honda-Tech Member
 
jdowen2's Avatar
 
Join Date: Dec 2002
Location: Mesa, Az, usa
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

I had a similar problem and it turned out to be the rear brake pads were worn.
Old 01-24-2011, 09:18 AM
  #8  
Trial User
Thread Starter
 
fluturm's Avatar
 
Join Date: Jan 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2001 Honda Accord metal grinding

The rear brakes are due for a change sometime soon, and I will check the calipers, thank you for the responses.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cstanis
Honda Accord (2013 - 2015)
0
03-12-2019 02:12 PM
Awconverse
Honda Accord & Crosstour (2003 - 2012)
5
08-14-2014 10:58 AM
Kellnos
Honda Accord (1990 - 2002)
2
08-03-2005 10:03 AM
doowop22
Honda Accord (1990 - 2002)
3
05-23-2004 01:54 PM



Quick Reply: 2001 Honda Accord metal grinding



All times are GMT -8. The time now is 01:16 AM.