where is the crank position sensor???
06-24-2010, 11:13 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: albuquerque NM
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
where is the crank position sensor???
i have a 94 civic ex.... my cel is on and its throwing a code 4. wont let me rev past 3100k... i replaced the dizzy and tryed other p28 ecu's but no luck. any help would be appreciated
06-26-2010, 02:59 PM
#5
Honda-Tech Member
Trending Topics
06-27-2010, 03:03 AM
#8
Re: where is the crank position sensor???
Multimeter will work. Basically just see if power is reaching the sensors.
GhostAccord explains it well:
Remeber to SEARCH! I found this info right here on H-T on the first try!
.
GhostAccord explains it well:
I would assume that the CKP sensor in your D16Z6 Civic is probably in the distributor. Not the same as the OBD2 Accord posted above. If the CKP in the distributor goes bad that means you will need to replace the distributor.
There is a test procedure
• Disconnect the 8pin connector from the distributor
• Measure the resistance between sensor terminals B & F (ECU terminals B15 BLU/GRN wire & B16 BLU/YEL wire)
• If the resistance is not between 350Ω & 700Ω replace the distributor.
• If the resistance is between 350Ω & 700Ω - Check for continuity to body ground on both B & F terminals.
• Does continuity exist
Yes - replace distributor
No
• Test the ECU
There is a test procedure
• Disconnect the 8pin connector from the distributor
• Measure the resistance between sensor terminals B & F (ECU terminals B15 BLU/GRN wire & B16 BLU/YEL wire)
• If the resistance is not between 350Ω & 700Ω replace the distributor.
• If the resistance is between 350Ω & 700Ω - Check for continuity to body ground on both B & F terminals.
• Does continuity exist
Yes - replace distributor
No
• Test the ECU
Remeber to SEARCH! I found this info right here on H-T on the first try!
.
08-05-2010, 03:06 PM
#9
Trial User
Join Date: Aug 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
Hi I've Got a 94' Accord ex and the MIL is saying that it is the Crankshaft position Sensor, is there any parts place that sells JUST the Sensor its self....I've tried local parts stores but no luck....Does anyone have a picture of the sensors location IN the Distributor????????????
08-06-2010, 09:01 AM
#11
Honda-Tech Member
Join Date: Nov 2005
Location: Pittsburgh, PA
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
Hi I've Got a 94' Accord ex and the MIL is saying that it is the Crankshaft position Sensor, is there any parts place that sells JUST the Sensor its self....I've tried local parts stores but no luck....Does anyone have a picture of the sensors location IN the Distributor????????????
Seriously, stop bumping every thread you open, it's pointless and annoying.
08-09-2010, 06:57 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: albuquerque NM
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
the dizzy works and it has continuity. so i just sprayed tb cleaner in the intake and it revs to almost 6k does this mean i have a fuel problem and the ecu is just throwing a code 4? any ideas will help thanks
10-26-2010, 12:08 PM
#14
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
I have a problem with my honda civic, he had a D16Z6 engine and had to replace a d16y7, when making the adaptation everything is in place but not functioning, the CKP d16y7 engine is next to the band's time and D16Z6 distributor of the CKP signal gives the different and this dealer, I can do to solve the problem??
10-26-2010, 12:28 PM
#15
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: where is the crank position sensor???
I have a problem with my honda civic, he had a D16Z6 engine and had to replace a d16y7, when making the adaptation everything is in place but not functioning, the CKP d16y7 engine is next to the band's time and D16Z6 distributor of the CKP signal gives the different and this dealer, I can do to solve the problem??
10-26-2010, 01:09 PM
#16
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
You can not start my honda, gives up but can not turn on
10-27-2010, 05:31 AM
#17
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
You can not start my honda, gives up but can not turn on,
10-27-2010, 06:09 AM
#19
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
my ecu is p28, that means that the wiring if I serve and are supposed to turn on the deep ..? Certainly not understand, if the cable CKP this band next to the distribution must be connected to the output of the distributor?
10-27-2010, 07:52 AM
#20
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: where is the crank position sensor???
But again, don't worry about the CKF sensor, the ECU wont look for it.
10-27-2010, 10:20 AM
#21
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
so, what can be not start engine my honda? if everything is conected in your place. You have some idea?
10-27-2010, 10:30 AM
#22
Trial User
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: where is the crank position sensor???
for that can get the signal for my distributor to the ecu p28?
Thread
Thread Starter
Forum
Replies
Last Post
padlock1978
Honda Civic / Del Sol (1992 - 2000)
1
04-12-2014 03:32 PM
