hello1320

Shaving my bay.......I was told that if filler it used it WILL crack. It's seems impossible to get the welded holes to look right without using filler. has anybody done this with filler and had it not crack. It seems that with solid mounts and all the forces on the chassis it would crack. The mounts were pulling off the spot welds so there has to be some extreme flexing going on. I don't know....never got a straight answer from anybody that has ACTUALLY done this. After I make a decision about this ill finally post pics of the car . Thanks

Luserkid

Ive done mine with a fiberglass mixed filler over my welds, havent had a crack minus the one when my motor hit a spot. I have Hasport shelf mounts and full race traction bar with front engine mount.

j-bird20

dont try to lay a bed...use spot welds all the way around. once ur finished grind it nice and smooth. then apply wuts called "putty glaze".you can lay it alot smoother than regular bondo and it sands away alot easier. as long as everything is welded correctly it wont flex and crack. u can use 100 gritt to cut the glaze fast then use a 180 to smooth it all out. if u want u can use alittle mist of black spray paint to see the inperfections. after all the holes are done i would hit the whole engine bay with a nice high build primer. scuff it down and spray it.

hello1320

Thanks alot......I cannot afford to have it crack....I've acquired the exact paint that's used on the lambo revention....sorry if this is not drag related but a lot the other guys cars are street cars....Iam using evercoat rage extreme ...that what was recommend at the supply shop...if I even use it

j-bird20

no problem. the lambo revention color is a flat/satin silver from wut i can see?

DC2_117

iTrader: (2)

I shaved the hell out of my bay. It's like glass. I haven't had any issues with mine yet. I am pretty sure we have similar setup's.

hello1320

Did you use filler

hello1320

If you only knew what it took to get the EXACT color

DC2_117

iTrader: (2)

Yes, and mar-glass, some rage, and some metal glaze.

hello1320

How long has it been done....do u race the car.......serious racing

01DC4

iTrader: (3)

lol.