rellikgtx

So i have a clicking noise that seems to be coming from under the valve cover. Before it use to do it every once in awhile but after throwing it accidentally in to 2nd gear on the freeway it clicks all the time and gets faster the higher the r's get. Any thoughts??? I have already checked the valve clearence. Thanks http://images.ibsrv.net/ibsrv/res/sr...ilies/boom.gif

Lude Acts

bent exhaust valves. If you mis-shifted at freeway speed, you probably bent all 8 exhaust valves.

rellikgtx

That's what me and a couple of my friend were thinking to. Do you know when Vtec is suppose to crack on a H22A? Thanks

Kyleb1115

i thought it was somewhere around 5800 or so? maybe higher/lower? i dont know. mine cracks at 4700=]

xsmokey11499x

mine is at 5 and a quarter.. Could just be a lifter tick eh?

milano_red_obd2

have your block checked too. did the same thing and have bent exhaust valves, and a bent rod.

dbd6604

4900 or 5200. Mine is 5200 but I've seen others claim theirs is 4900 stock.

Seroga415

how the hell does it crack at 4700... lol???

dbd6604

He's probably tuned.

rellikgtx

ok well when i checked it the valve lash clearence the first time, i did it to spec. So when i decided to check it one last time before i started the take the head and off and found out that the lock had "Walked" off and was gone??? lol i think it must have fallen down into the oil pan. So i got a new lock nut (which is impossible to find unless you go to Greg's Jap. Auto ) adjusted the clearence and now it runs great!!

Mine cracks at 5900-6000? lol

Thanks for all the advice

dbd6604

Jesus crust that's high lol.

rellikgtx

Is there a difference between a F22 and a H22 Vtec Solenoid?

Rasmusm

mine is around 4700-4900 not 100% sure, had it tuned with eCtune
6k sounds to high? Stock I'd say 5400

rellikgtx

Yeah thats what i had thought too. You thin getting a Vtec Controller would help that?

havikprelude

mine hits at about 5400. I'm pretty sure thats stock. Either that or 5600 is stock.

dbd6604

Stock is 4900.

DCFIVER

no I beleive stock is 5200, and 4900 i beleive is when the IAB's open. (could be wrong though)

Rasmusm

All VTEC hondas I've driven VTEC engages over 5k rpm, except mine cause I had it tuned
And im pretty sure a H22A engine its around 5200-5400