punkracer

hey guys gettting ready for tucking my hatch and dont want to go broke on the tuck... an fittings and tube nuts and bulkhead connector will break the bank.... i know ive seen chase do some things here https://honda-tech.com/forums/showpost.php?p=31049160&postcount=63

and NHswaps13203 do some .....

so questions...

1)any non AN bulkhead fittings?

2) what grommets can i use for firewall/wheel well conections


post pics and or links i got to page 15 of 30 in brake line tuck guidelines...and got **** to do today soo ....lol me=lazy today...

thANKS in advance...

HatchVX

Bump, would like to see some info on this also.

redboost10

on my first brake line tuck, i used new hard line and just reused the original fittings that came on the civic brake lines. as for the grommets, i just used the regular rubber grommets.

punkracer

so did u not use a bulkhead connector?

i got the gromit question figured out, i would like to use a bulkhead NON AN of course....

BUMP for any NON AN brake tuck INFO

redboost10

i didnt use any buldheads. just used new lines and the original fittings

dc4teg95

I would also like to see pics of tucks were the proportion valve is just put lower in the engine bay rather then brought inside the cabin

redboost10

thats exactly what i did, i mouted it on the frame rail right under the master cylinder. i dont have any pictures though

punkracer

so u just ran the lines through the firwire with grommit?

redboost10

yes, i didnt see a problem with doing it like that

punkracer

i also dont see a need for bulkhead fittings...if quilty brake line is used then there will be no need to replace (due to Rusting etc)i thinkim going to do a DIY NON AN thread very soon....ordering some brake line suggested by a fellow H-t member..


did a cost analyisis on AN fitting to tuck brake lines... https://honda-tech.com/forums/showpo...&postcount=739

parts list at anplumping.com and with out brake line its 493.93 without shipping..

punkracer

bump for some more input...

dc4teg95

rywire sell a complete kit for brake line tucks. Ill be ordering this kit soon hopefully

http://rywire.com/store/proportion-v...3e779834e61e06

punkracer

[quote=dc4teg95;41824885]rywire sell a complete kit for brake line tucks. Ill be ordering this kit soon hopefully

/quote]

and so does chasebays.....but this is stll AN and still baller $$ to spend on relocation on prop valve.... i ordered some good line and bushings, i will keep track of price list and will make a DIY for the NON AN brake tuckers to follow in future... rather spend 300 addtional $$ i would have spent on the line kit and put toward tuning my car...

NON AN TUCK FTW....

zdub907

bump

{BAGEN}

Maybe this can help a bit..

punkracer

nice thats exactly where im going with mine.... got any inside firewall pics?

turtleman321

I dont know where your getting that price at. go to jegs.com i spent like 105 for all jegs or russel AN brake line fittings. 4 straight bulkheads, 2 banjos with bolts and washers, 6 -3AN to 10x1.0mm fittings, and like 12 tube nuts and sleeves. I reused the stock caliper fittings.

with brake line from advanced auto was like 130.

{BAGEN}

Yes i do..

Dyce

anymore info on this? Im looking to try this out in about 2 weeks

Bagen do you happen to have any bay pics that you can provide?

boarding2008

where did u guys find the rubber grommet? i did a google search and came up with places that only sell them by the 100s. i dont need that many lol

punkracer

bump update, im doing my car and will have a DIY thread soon after....