1 wire to 4 wire o2, 92 CX...
01-17-2010, 12:26 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
1 wire to 4 wire o2, 92 CX...
ok. so i had a 92 civic CX and i am swapping in a mini-me (b7 block z6 head) and is being run by a p28.
sooo. i was curious about the o2 sensor. i have found ways to do this by running wires to the ecu directly, but all the article that i have found to do this utilize the stock d15b7/8 wire harness. i am using a d16z6 wiring harness so it already has the 4 wire o2 sensor plug on it. is it just plug and play the or do i still need to run wires? yes i have tried searching to no avail. thanks for any help.
sooo. i was curious about the o2 sensor. i have found ways to do this by running wires to the ecu directly, but all the article that i have found to do this utilize the stock d15b7/8 wire harness. i am using a d16z6 wiring harness so it already has the 4 wire o2 sensor plug on it. is it just plug and play the or do i still need to run wires? yes i have tried searching to no avail. thanks for any help.
01-17-2010, 01:19 AM
#2
Reject Papi
iTrader: (1)
Join Date: Oct 2007
Location: chambersburg, pa 17202
Posts: 14,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1 wire to 4 wire o2, 92 CX...
a d15b7 motor is already obd1. if you're using a d16z6 harness, then your set to go. just plug and play for the most part.
01-17-2010, 04:50 AM
#3
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: 1 wire to 4 wire o2, 92 CX...
Because your civic is a '92 its 100% plug and play with the EX/Si engine harness. '92 only civics had vtec prewired to the shock tower plugs, as well as the additional wiring for a 4 wire O2 sensor on CX models.
Thread
Thread Starter
Forum
Replies
Last Post
918-Hatch
Honda Civic / Del Sol (1992 - 2000)
14
05-30-2005 06:28 PM
beyond-redline
Hybrid / Engine Swaps
2
01-30-2003 07:15 PM
