GSR936

what do i need to put ac into a 98 civic ek coupe that has a gsr swap ?

Anon51

do you have your original a/c lines? no lines? evaporator? condenser? dryer? compressor?

GSR936

car has lines but no ac compressor or condenser

GSR936

ttt

Anon51

do you still have the gsr a/c bracket bolted on? if not go grab a vtec delsol a/c bracket or its much cheaper counter part the crv b20 a/c bracket. and find a 96-98 d series a/c compressor. unless you wanna use a gsr a/c compressor in which case a gsr bracket and compressor and lines is what you want.

GSR936

OK i found a b20 ac bracket for 30 bucks. can i use a 97 auto d series ac comperssor?

GSR936

and condenser from a 97 auto?

Anon51

yea you just need teh d series compressor lines now that go from the evaporator to the compressor and condensor.

GSR936

alright just making sure the ac compressor and condensor were from a 97 civic auto were the same.

Vindicator9000

Yes. Everything is D-series except the bracket which should be B20.

On mine, I retained the entire D-series A/C system with the B20 bracket. The D series compressor should bolt up to the B20 bracket and everything will line up like OEM. This is because, if you've ever seen a CRV, it uses a D-series compressor on a B-series engine.

GSR936

yes thats good. found a bracket and i got a donor 97 ek auto will all ac lines and stuff

extremeEK00

hey where did u find that ac bracket from a b20?

extremeEK00

im thinking about putting a gsr swap into a 00 civic coupe and thought i needed the gsr ac bracket but read this and seen i need a b20 bracket?? is that true? how does that work?