November FS Sticky
11-01-2009, 05:59 AM
#1
Mr. Badwrench
Thread Starter
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
November FS Sticky
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 11-16-2009, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 11-16-2009, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.
Last edited by boostedcivicsir; 11-16-2009 at 08:19 PM.
11-01-2009, 06:53 AM
#2
Honda-Tech Member
Join Date: Oct 2007
Location: port tobacco, md, charles
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
FJO Injector Driver ($150)
3” SS Exhaust [Custom] w/ Vibrant muffler ($350 picked up)
Made by Tempest Racing
came off a '97 civic
Please pm me with any question or offers.
Paypal fees not included, shipping is negotiable.
3” SS Exhaust [Custom] w/ Vibrant muffler ($350 picked up)
Made by Tempest Racing
came off a '97 civic
Please pm me with any question or offers.
Paypal fees not included, shipping is negotiable.
11-01-2009, 07:07 AM
#4
Honda-Tech Member
Re: November FS Sticky
Mint set of 16'' Drag dr-16's. only used on the dyno, maybe 25miles on them, maybe.
fronts are falken azenis 225/50/16 rears are falken ziex 512 205/55/16 $500.00
fronts are falken azenis 225/50/16 rears are falken ziex 512 205/55/16 $500.00
11-01-2009, 07:26 AM
#5
Re: November FS Sticky
precision injectors 1200cc $240
Exile MSBC brand new in the box $400 Or willing to trade for a 4" aluminum exhuast for eg hatch but it must go over the control arm
Exile MSBC brand new in the box $400 Or willing to trade for a 4" aluminum exhuast for eg hatch but it must go over the control arm
Last edited by EDLOVA23; 11-01-2009 at 09:14 AM.
11-01-2009, 09:16 AM
#6
Honda-Tech Member
Join Date: Oct 2006
Location: cincinnati, ohio, u.s.
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
i have a few things sitting around the garage that i am tired of looking at. all prices include shipping but does not include paypal fees.
1.) 750cc precision injectors. 200 shipped. one of them needs a new rubber oring.
2.) h22 drag manifold. 125 shipped.
3.) tial 35mm watsegate. 150 shipped. SOLD
4.) JE 9:1 h22 pistons 400 stock bore. pins included. brand new never used. coated by calico coatings teflon on the sides and nitrile on the tops (they were installed on my sleeved block but never ran on. so the rings are on the pistons and maybe could work, but i would recommend new rings.)
5.) old school drag intercooler. 100 shipped dimensions are 22x 6.5 x 2.5in.
6.) T3 60-1, 400 shipped, only has 2k miles on it. SOLD
1.)
2.)
3.)
4.)
5.)
1.) 750cc precision injectors. 200 shipped. one of them needs a new rubber oring.
2.) h22 drag manifold. 125 shipped.
3.) tial 35mm watsegate. 150 shipped. SOLD
4.) JE 9:1 h22 pistons 400 stock bore. pins included. brand new never used. coated by calico coatings teflon on the sides and nitrile on the tops (they were installed on my sleeved block but never ran on. so the rings are on the pistons and maybe could work, but i would recommend new rings.)
5.) old school drag intercooler. 100 shipped dimensions are 22x 6.5 x 2.5in.
6.) T3 60-1, 400 shipped, only has 2k miles on it. SOLD
1.)
2.)
3.)
4.)
5.)
Last edited by mrbh22; 11-20-2009 at 12:53 PM.
11-01-2009, 09:36 AM
#7
Honda-Tech Member
Join Date: Feb 2005
Location: Speed Scene Live, CA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gotta sell my '91 CRX drag car!
http://s976.photobucket.com/albums/a...urrent=028.jpg
Rolling car with three K motors, two brand new clutch's, new axles, certified Chromoly cage, new lexan, fresh GearSpeed tranny with spool, new fuel cell, new lexan, tons and tons of parts, One piece glass front end, doors and hatch, so much stuff I cant list it all.
Bring a trailer for the car and a truck for the parts.
Fenders, doors, lights, etc. etc. etc
$4900
Call Lucky at 714 342-6485
Rolling car with three K motors, two brand new clutch's, new axles, certified Chromoly cage, new lexan, fresh GearSpeed tranny with spool, new fuel cell, new lexan, tons and tons of parts, One piece glass front end, doors and hatch, so much stuff I cant list it all.
Bring a trailer for the car and a truck for the parts.
Fenders, doors, lights, etc. etc. etc
$4900
Call Lucky at 714 342-6485
Trending Topics
11-01-2009, 10:25 AM
#8
Honda-Tech Member
Join Date: Feb 2007
Location: Rancho Cucamonga, ca, usa
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
Willing to Part Out but need to sell a majority of parts first, I will start a list of items and will take deposits once I have tore car apart. Need to sell 92 Civic Coupe,LS V-TEC, Golden eagle sleaved 84mm, Arias pistons and Eagle rods. LS Crank micropolished, JG Pro series head w/Valves, springs and retainers, Garrett Turbo, Innovative Solid Motor Mounts, Fluid damper Crank Pully, Golden Eagle Cam Gears, 1 gallon Fuel Cell w/SX Black Pump and Filter, Bosch 1600 cc injectors, Custom Intercooler Piping, Custom Intercooler, JG Manifold, DSS Axles, B16 Hydro trans w/Pro Drive Spool, Clutch Specialties Clutch and Flywheel, Koyo Aluminum Radiator, Custom Stainless Rad Hoses, CNC Brakes and Clutch pedals w/resivoirs, custom brake lines, Full cage w/cert to 8.50, Wheelie bar and chute, Full F.A.L Window kit, 1 piece front end, fiberglass doors, dash and trunk lid, All interior sheet metal and front wheel housing, Custom Paint and airbrushing, Weld Drag 15 x 8 front on MT 26in slick and front Apex coil overs, rear susp is (Ron Lumas) Strange rear strut w/250lb spring (needs 80lb) all aluminum radius rods w/hyme joints and fully adjust. the susp and rear wheels in pix are no longer on vehicle, rear wheels now are Bogart Spindle mounts. DFI Engine Management w/Msd Dig7, MSD 2 step, quick release steering wheel and window net. Car runs consitant 10.50 and is turn key ready to race and trailer is a Carson Racer 20 foot, custom air brush on rear gate. 6 tie downs. $10k for car only, $12.5 car and trailer, price is firm, email for additional info.
Last edited by joe95b18coupe; 11-18-2009 at 08:24 AM.
11-01-2009, 12:13 PM
#9
Honda-Tech Member
Join Date: Nov 2003
Location: Shelbyville, KY, USA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
Aeromotive Eliminator, used about 250 miles: $300
Aeromotive FPR with -10 inlets: $100
BorgWarner S374 with 1.25 exhaust housing and race compressor cover. 250 miles on it and a handful of dyno pulls. Perfect condition, asking $1300 OBO. Bought from VPFab about a year ago for $1600.
Aeromotive FPR with -10 inlets: $100
BorgWarner S374 with 1.25 exhaust housing and race compressor cover. 250 miles on it and a handful of dyno pulls. Perfect condition, asking $1300 OBO. Bought from VPFab about a year ago for $1600.
Last edited by Drag_S14; 11-12-2009 at 09:49 PM.
11-01-2009, 03:25 PM
#12
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2004
Location: FL, U.S.A.
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
OEM LS main caps with oem main bolts $50
OEM Honda/Golden Eagle 83mm head gasket for ls/vtec new in the box never opened. $80
Working resister boxes $20 each(2)
Working GM boost solenoid $20 like new!
Fuel Lab FPR needs a new gasket $50
Integra sunroof switch $10
OEM b-series map sensor. $10
Tial 44mm wastegate flange $10
-6to-10 AN fitting $5
-6to-6 AN ftting $5
Integra aluminum intercooler piping fits log,ram horn and top mount manifold comes with everything pictured. $150
AEM fuel rail machined to fit bigger injector heads $50
Autometer Roll bar gauge mount $15
Del Sol dual core rad with 5k on it no leaks with a slim fan $50
OEM Honda/Golden Eagle 83mm head gasket for ls/vtec new in the box never opened. $80
Working resister boxes $20 each(2)
Working GM boost solenoid $20 like new!
Fuel Lab FPR needs a new gasket $50
Integra sunroof switch $10
OEM b-series map sensor. $10
Tial 44mm wastegate flange $10
-6to-10 AN fitting $5
-6to-6 AN ftting $5
Integra aluminum intercooler piping fits log,ram horn and top mount manifold comes with everything pictured. $150
AEM fuel rail machined to fit bigger injector heads $50
Autometer Roll bar gauge mount $15
Del Sol dual core rad with 5k on it no leaks with a slim fan $50
Last edited by Will_H; 11-09-2009 at 04:00 PM.
11-01-2009, 03:56 PM
#13
Honda-Tech Member
Join Date: May 2008
Location: silvercreek, ga, usa
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
Everything has under 1000 miles on it
350$ PFAB log manifold w/ T3 Flange selling with downpipe AC and PS compatible
230$ Tial 38mm Waste Gate w/gasket and dumptube
50$ Gm 3 bar map sensor with pigtail
240$ Rc engineering 750cc injectors
50$ silver BDL fuel rail
300$ JE 81mm 9:1 pistons that need rings
200$ B16 Eagle rods w/ big rod bolts $450$ for pistons and rods
200$ clutchmasters stage 3 clutch
350$ PFAB log manifold w/ T3 Flange selling with downpipe AC and PS compatible
230$ Tial 38mm Waste Gate w/gasket and dumptube
50$ Gm 3 bar map sensor with pigtail
240$ Rc engineering 750cc injectors
50$ silver BDL fuel rail
300$ JE 81mm 9:1 pistons that need rings
200$ B16 Eagle rods w/ big rod bolts $450$ for pistons and rods
200$ clutchmasters stage 3 clutch
Last edited by jody754; 11-04-2009 at 07:09 PM.
11-01-2009, 04:23 PM
#14
Honda-Tech Member
Join Date: Jan 2006
Location: PISCATAWAY, NEW JERSEY, USA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
I have a used SX 18201 Fuel Pump w/ 41001 Fuel Filter. Worked great before I took it off the car a few months back. Taking offers...
The 18201/18203 EFI and Carburetted Alcohol Compatible Electric Fuel Pump
Here is some info on it:
Aerospace Engineered and Manufactured
Supports up to 1,300 HP
Maximum Tuning Flexibility
Compact & Lightweight Designs
Quick & Easy to Install
The 18201 Electric Fuel Pump is the industry leader in it's class. Designed for both EFI and carburetted applications, the 18201 can support up to 1500 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18201 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval in marine applications.
The industry leader in it's class. Designed for both EFI and carburetted applications, the 18203 can support up to 1,300 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18203 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval for use in marine applications.
Make no mistake about it, SX Performance™ has created the most reliable fuel pump in the world today that handles high pressure/high volume fuel systems up to 1,300 HP at 45 PSI. So no matter what you're running, our pump alone lets you switch between carburetted and fuel injected systems simply by changing the regulator.
When a thousandth of a second can win a race, you need a total fuel system with consistent and reliable performance, run after run. You need a manufacturer with decades of proven flow and pressure experience.
You need SX Performance™.
The 18201/18203 EFI and Carburetted Alcohol Compatible Electric Fuel Pump
Here is some info on it:
Aerospace Engineered and Manufactured
Supports up to 1,300 HP
Maximum Tuning Flexibility
Compact & Lightweight Designs
Quick & Easy to Install
The 18201 Electric Fuel Pump is the industry leader in it's class. Designed for both EFI and carburetted applications, the 18201 can support up to 1500 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18201 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval in marine applications.
The industry leader in it's class. Designed for both EFI and carburetted applications, the 18203 can support up to 1,300 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18203 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval for use in marine applications.
Make no mistake about it, SX Performance™ has created the most reliable fuel pump in the world today that handles high pressure/high volume fuel systems up to 1,300 HP at 45 PSI. So no matter what you're running, our pump alone lets you switch between carburetted and fuel injected systems simply by changing the regulator.
When a thousandth of a second can win a race, you need a total fuel system with consistent and reliable performance, run after run. You need a manufacturer with decades of proven flow and pressure experience.
You need SX Performance™.
11-01-2009, 04:24 PM
#15
Honda-Tech Member
Join Date: Jan 2006
Location: PISCATAWAY, NEW JERSEY, USA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
I have a used Haltech E6K w/ Harness. Still in great condition. Taking offers (maybe $600).
Last edited by KTULU990; 11-02-2009 at 08:25 PM.
11-01-2009, 04:36 PM
#16
Honda-Tech Member
Join Date: Oct 2005
Location: logan, ohio, us
Posts: 1,328
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
kseries parts. sorry these pics were taken for over at k20a.org figured i'd use them here
precision 1000cc injectors off my turbo kseries just got cleaned and flow tested $250 shipped
ATS kseries 5.0 final drive ring gear and shaft $230 shipped.
base rsx 5spd trans. unknown condition car had 56,xxx miles on the clock $450 plus shipping
2 walbro 255 intanks fuel pumps one with 700 miles the other with only 4 passes $100 for both shipped or $60 each shipped
gm 3bar map sensor $30 shipped
precision 1000cc injectors off my turbo kseries just got cleaned and flow tested $250 shipped
ATS kseries 5.0 final drive ring gear and shaft $230 shipped.
base rsx 5spd trans. unknown condition car had 56,xxx miles on the clock $450 plus shipping
2 walbro 255 intanks fuel pumps one with 700 miles the other with only 4 passes $100 for both shipped or $60 each shipped
gm 3bar map sensor $30 shipped
11-02-2009, 06:33 AM
#18
Honda-Tech Member
Join Date: Nov 2003
Location: NJ, 07728
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
FS:Used Turbo kit
-Full-Race ram horn manifold ($600.00)
-Garrett turbo T3/67 (prob 30-40 passes on it) great turbo ($500.00) SOLD!!!!
-3in Full-Race down pipe ($250.00)
-TIAL 44mm waste gate (with dump tube) ($350.00)
-S-Max big core intercooler (brand new, NO INTERCOOLER PIPING) ($300.00)
-3in custom full exhaust with Borla XR-1 muffler ($300.00)
-TIAL blow off valve ($200.00)
(this turbo kit on my car ran a 10.5 @140mph SFWD car) was on a ls/vtec set up has more in it, made 600+hp... $2000.00 for this turbo kit... pix will be up soon......
email me @ boostedeg@yahoo.com or pm me......
I am willing to part out (prices are listed) or you can buy the whole kit at a cheaper price.. pick up only, will ship at buyers expense.......
I also have:
Precision 825hp intercooler brand new in box ($500.00)
Inlinepro cast iron log turbo manifold for T3 or T4 turbos brand new in box ($400.00)
-Full-Race ram horn manifold ($600.00)
-Garrett turbo T3/67 (prob 30-40 passes on it) great turbo ($500.00) SOLD!!!!
-3in Full-Race down pipe ($250.00)
-TIAL 44mm waste gate (with dump tube) ($350.00)
-S-Max big core intercooler (brand new, NO INTERCOOLER PIPING) ($300.00)
-3in custom full exhaust with Borla XR-1 muffler ($300.00)
-TIAL blow off valve ($200.00)
(this turbo kit on my car ran a 10.5 @140mph SFWD car) was on a ls/vtec set up has more in it, made 600+hp... $2000.00 for this turbo kit... pix will be up soon......
email me @ boostedeg@yahoo.com or pm me......
I am willing to part out (prices are listed) or you can buy the whole kit at a cheaper price.. pick up only, will ship at buyers expense.......
I also have:
Precision 825hp intercooler brand new in box ($500.00)
Inlinepro cast iron log turbo manifold for T3 or T4 turbos brand new in box ($400.00)
11-02-2009, 08:58 AM
#19
Honda-Tech Member
Re: November FS Sticky
K series
competition clutch twin disc. $1200 BRAND NEW!
http://i25.photobucket.com/albums/c5.../Twindisc2.jpg
Oil pan with welded -10 bung $100
-Injector dynamics 1000cc injectors $400 or $420 with obd1/ev1 adapters
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-Circuit werx hubs w/ studs includes civic knuckles and new honda wheel bearings and ball joints $450
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-HAsport EGk1 motor mounts $400
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-Polished lenso vpd’s (scratched from on the inside from manufacture) with m&h 25’s (9 passes on them) $500
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-(new)AEM EMS for kswap cars $1200
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-AEM 3.5 bar map sensor $100
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-(new)Eagle rods $250
-(new)Wiesco pistons 9:0:1 86.5 $450
-(new)Cometic MLS gasket $75
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-PWR radiator $175
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
competition clutch twin disc. $1200 BRAND NEW!
http://i25.photobucket.com/albums/c5.../Twindisc2.jpg
Oil pan with welded -10 bung $100
-Injector dynamics 1000cc injectors $400 or $420 with obd1/ev1 adapters
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-Circuit werx hubs w/ studs includes civic knuckles and new honda wheel bearings and ball joints $450
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-HAsport EGk1 motor mounts $400
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-Polished lenso vpd’s (scratched from on the inside from manufacture) with m&h 25’s (9 passes on them) $500
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-(new)AEM EMS for kswap cars $1200
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-AEM 3.5 bar map sensor $100
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-(new)Eagle rods $250
-(new)Wiesco pistons 9:0:1 86.5 $450
-(new)Cometic MLS gasket $75
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
-PWR radiator $175
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
11-02-2009, 10:46 AM
#20
Re: November FS Sticky
PARTING OUT! Everything has 40 miles on it. All in "new" condition
-Peakboost Topmount manifold (T3, single 44) $900
- Garret GT35R turbo with .63 a/r exhaust housing (4bolt to vband adapter included) $1000
- Peakboost 3 to 4 inch Downpipe with EGT port in pipe (Vband) -$350
- GT series water lines -$150
- Oil feed and return (-10 return all stainless) -$65
- Garrett core intercooler -$300
- Peakboost charge pipe kit with all couplers and clamps - $200
- Tial 50mm BOV Silver - $175
- Tial 44mm WG Silver (Vband dumptube included) - 275
- Delphi 1000cc Injectors -$250
- AEM 1040 EMS -$500
- AEM injector Driver $150
- Golden Eagle Vacuum block - $35
- Mfactory oil sandwich plate -$50
- BandR Catch can with VC and block fittings. Brand new only assembled - $500
-M&H 24.5x8.5x15 slicks with 10 passes - $275
ALL PRICES NEGOTIABLE
I think thats everything.
No wait from peakboost, just buy it all, and put it on your car.
Again, this stuff is all in NEW condition and has NO PROBLEMS.
Pics on my car
-Peakboost Topmount manifold (T3, single 44) $900
- Garret GT35R turbo with .63 a/r exhaust housing (4bolt to vband adapter included) $1000
- Peakboost 3 to 4 inch Downpipe with EGT port in pipe (Vband) -$350
- GT series water lines -$150
- Oil feed and return (-10 return all stainless) -$65
- Garrett core intercooler -$300
- Peakboost charge pipe kit with all couplers and clamps - $200
- Tial 50mm BOV Silver - $175
- Tial 44mm WG Silver (Vband dumptube included) - 275
- Delphi 1000cc Injectors -$250
- AEM 1040 EMS -$500
- AEM injector Driver $150
- Golden Eagle Vacuum block - $35
- Mfactory oil sandwich plate -$50
- BandR Catch can with VC and block fittings. Brand new only assembled - $500
-M&H 24.5x8.5x15 slicks with 10 passes - $275
ALL PRICES NEGOTIABLE
I think thats everything.
No wait from peakboost, just buy it all, and put it on your car.
Again, this stuff is all in NEW condition and has NO PROBLEMS.
Pics on my car
11-02-2009, 11:32 AM
#21
Honda-Tech Member
Join Date: Mar 2004
Location: SAN DIEGO, CA, USA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
fully built long block GSR with b16 head $4500 this motor made 980whp.
95 GRS long block it has about 90000miles $1100.
NEW 85mm RS pistons with rings $200.
B- series NEW skunk2 stage 1 cams $350.
B-series used skunk2 stage 2 cams $300.
NEW skunk2 B-series SRINGS and RETAINERS $250.
NEW BLOX 76mm throttle body $220.
93 civic The CircuitWorx Stage 2 drive AXLES, HOPS, INTERMEDIATE SHAFTS AND SPOOL. $1000.
simpson Parachute $200.
STRANGE drags 800 rear, 550 fronts coil overs $1000.
LSL T4 Twin Scroll Manifold $500
Tial 50mm bov $ 200
4" Down Pipe $100.
4" core intercooler
3" IC piping $500.
DriveTrain:
NEW G-FORSE Dog Box transmission
gears 2.92 1.88 1.43 1.12 with 2 final drives 4.0 and 4.73
$4000.
hyro Tilton twin disc clutch with only 5 passes $900.
cable Tilton twin disc clutch it only seen dyno $900.
95mm eagle crank $350.
NEW 95MM crower cranks $450.
call at 619 278 8337 ask TB. .
95 GRS long block it has about 90000miles $1100.
NEW 85mm RS pistons with rings $200.
B- series NEW skunk2 stage 1 cams $350.
B-series used skunk2 stage 2 cams $300.
NEW skunk2 B-series SRINGS and RETAINERS $250.
NEW BLOX 76mm throttle body $220.
93 civic The CircuitWorx Stage 2 drive AXLES, HOPS, INTERMEDIATE SHAFTS AND SPOOL. $1000.
simpson Parachute $200.
STRANGE drags 800 rear, 550 fronts coil overs $1000.
LSL T4 Twin Scroll Manifold $500
Tial 50mm bov $ 200
4" Down Pipe $100.
4" core intercooler
3" IC piping $500.
DriveTrain:
NEW G-FORSE Dog Box transmission
gears 2.92 1.88 1.43 1.12 with 2 final drives 4.0 and 4.73
$4000.
hyro Tilton twin disc clutch with only 5 passes $900.
cable Tilton twin disc clutch it only seen dyno $900.
95mm eagle crank $350.
NEW 95MM crower cranks $450.
call at 619 278 8337 ask TB. .
Last edited by TBmotorworx; 11-02-2009 at 12:29 PM. Reason: changes
11-02-2009, 12:23 PM
#22
Honda-Tech Member
Join Date: May 2005
Location: Glen Burnie
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
im parting out my Spfwd car due to finace issues coming up(a baby). just went 9.96@153 at englishtown with these parts. the car also made 750@34 pounds on a mustang dyno with this set-up. add 3% for paypal and buyer will pay shipping fees. have some pics of most of the things if not they will be posted in a couple days.
Golden eagle polished fuel rail $90
Precision 1200cc injectors $250
Magnafuel fuel pressure regualtor $150
Fluydine radiator and slim fan $275
Generic intake manifold gasket(gsr) $30
Omnipower drag suspension(18k rear-12k front) $750
4 inch aluminum exhaust $450(perfer local pickup)
G-force transmission(hydro input shaft) $4400
G-force cable spline input shaft $350
Rear t-bracket (gsr) $50
integra shift linkage and skunk2 shifter $100
Golden eagle polished fuel rail $90
Precision 1200cc injectors $250
Magnafuel fuel pressure regualtor $150
Fluydine radiator and slim fan $275
Generic intake manifold gasket(gsr) $30
Omnipower drag suspension(18k rear-12k front) $750
4 inch aluminum exhaust $450(perfer local pickup)
G-force transmission(hydro input shaft) $4400
G-force cable spline input shaft $350
Rear t-bracket (gsr) $50
integra shift linkage and skunk2 shifter $100
Last edited by GT40eg; 11-25-2009 at 10:13 AM.
11-02-2009, 02:30 PM
#23
Honda-Tech Member
Re: November FS Sticky
aebs head stud kit b series
used mint condition sold off a spare motor.
60.00 shipped
billet 6061-t6 v band kit w/ oring 2.5"
35.00
billet 6061-t6 v band kit w/ o ring 3"
40.00
b series twin scroll manifold w/ twin wastegates t flanged
NEW accepts tial 44 wg or equivalent v band type wg. all flanges are belt sanded to seal properly
800.00
ramhorn manifold for bseries
complete back purged manifold sch10, t3 flanged and accepts a tial 44mm wg. only used for mock up fits great and brand new
600.00!!!!lower price
top mount manifold b series.
NEW b series top mount for t3 and t4 turbine housings. has both bolt patterns for turbine applications. accepts single tial 44mm wg.
750.00
golden eagle b16/ls manifold w/ accufab 90mm tb with v band clamp attachment.
this is a ge intake manifold with a 90mm accufab tb. 90mm tb flanged already welded comes with everything, gaskets, v band, tps sensor, ge billet blk anodized polished f rail, ported runners. everything is setup and no need to fabricate anything to make this work. oem throtle cable will work. 1000.00 + into this manifold.
willing to part out 400.00 manifold, 80.00 rail w/ guage, 350.00 tb with vband.
700.00 takes it all
TURBO OIL FEED/EVAC KIT
-comes with everything you need for your turbo
$115.00 shipped.
T1 catch can
mint cond, comes with 2 -10 caps all fittings are -10 and has drain backs to block for easy mant. free opperation
175.00
FCS clutch line kit. this kit is for clutch master to slave. eliminates all the oem lines to the slave. looks really nice. comes with 2 fittings and ss line with clear jacket.
65.00 shipped
FCS brake line kit new in the bag with clips,bolts,washers,etc. lines comes with mounts and a clear jacket to cover the ss braided line. fits civic/integra, ek, da, em very nice. sells for 139.00 just removed it to take pictures.
90.00 shipped
1/4" d.o.t. air brake push lock vaccum / boost kits
everything you need to plum your turbo or vaccum lines. stainless steel fittings with high temp high impact d.o.t approved fittings and firestone d.o.t air brake lines.
plum your twin wastegates, boost solenoid, b.o.v, fpr, boost ref, and vacuum all in one package
95.00 SHIPPED
please pm me or if you need immediate response since this sale thread is first come first serve, please email me or aim
hellomrparks@yahoo.com
aim: jparks8832
used mint condition sold off a spare motor.
60.00 shipped
billet 6061-t6 v band kit w/ oring 2.5"
35.00
billet 6061-t6 v band kit w/ o ring 3"
40.00
b series twin scroll manifold w/ twin wastegates t flanged
NEW accepts tial 44 wg or equivalent v band type wg. all flanges are belt sanded to seal properly
800.00
ramhorn manifold for bseries
complete back purged manifold sch10, t3 flanged and accepts a tial 44mm wg. only used for mock up fits great and brand new
600.00!!!!lower price
top mount manifold b series.
NEW b series top mount for t3 and t4 turbine housings. has both bolt patterns for turbine applications. accepts single tial 44mm wg.
750.00
golden eagle b16/ls manifold w/ accufab 90mm tb with v band clamp attachment.
this is a ge intake manifold with a 90mm accufab tb. 90mm tb flanged already welded comes with everything, gaskets, v band, tps sensor, ge billet blk anodized polished f rail, ported runners. everything is setup and no need to fabricate anything to make this work. oem throtle cable will work. 1000.00 + into this manifold.
willing to part out 400.00 manifold, 80.00 rail w/ guage, 350.00 tb with vband.
700.00 takes it all
TURBO OIL FEED/EVAC KIT
-comes with everything you need for your turbo
$115.00 shipped.
T1 catch can
mint cond, comes with 2 -10 caps all fittings are -10 and has drain backs to block for easy mant. free opperation
175.00
FCS clutch line kit. this kit is for clutch master to slave. eliminates all the oem lines to the slave. looks really nice. comes with 2 fittings and ss line with clear jacket.
65.00 shipped
FCS brake line kit new in the bag with clips,bolts,washers,etc. lines comes with mounts and a clear jacket to cover the ss braided line. fits civic/integra, ek, da, em very nice. sells for 139.00 just removed it to take pictures.
90.00 shipped
1/4" d.o.t. air brake push lock vaccum / boost kits
everything you need to plum your turbo or vaccum lines. stainless steel fittings with high temp high impact d.o.t approved fittings and firestone d.o.t air brake lines.
plum your twin wastegates, boost solenoid, b.o.v, fpr, boost ref, and vacuum all in one package
95.00 SHIPPED
please pm me or if you need immediate response since this sale thread is first come first serve, please email me or aim
hellomrparks@yahoo.com
aim: jparks8832
Last edited by MrParks; 11-09-2009 at 09:53 PM.
11-02-2009, 02:54 PM
#24
Honda-Tech Member
Join Date: Nov 2007
Location: Nj
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
wats good im selling a legit(papers) 97 fully built b20 block, has no more than 800-1000 miles..was properly broken in..only saw dyno and track..was neva driven on the streets,(which this setup could be daily'd with no problem with the proper tune)..all machine work was done by Bob's Speed Shop in Harrison.Motor mad 230hp/160 torque with a b16 head and skunk 2 pro 2's..tuned by Cunha clm motorsports ..there is nothing absolutely wrong with it..goin diff route..any1 can vouce for me and my parts..i could be forgettin detail but feel free to ask me anything and dont be afraid to make an offer
Located Union City,nj 07087
built type-r tranz.. soldd!!!!!
~Type R shift linkage with chrome shifter..100 obo
~obd 1 aem in box with cable,Model # 30-1000..still has warranty wit aem...pm me with a decent offer
~ACT stage 5, ,extreme pressure plate and six puck sprung and oem shaved type r flywheel..paid 550 for it ..only has 7 passes on the track..askn 350 obo
~bseries.after market mounts for eg or teg..sold
~bseries starter..40obo
~2 sets of bseries stock axle's..70 (sets only)
~bseries midshaft..best offer
~beseries rear tranny T bracket..for eg or teg..best offer
~specs..
84.5 mm,decked,hot tanked,cleaned in and out
12.5 Cp light weight pistons
Golden eagle rods
Acl race bearings, whole bottom end
89mm new ls crank
Gates timing belt
New timing tensioner
Unorthodox racing crank pulley
ls water pump
Shimmed Type-r oil pump
obd 1 alternator
oem oilpan
all gaskets are from honda dealer
ill also include the head gasket which is still fresh,but i personally would change it..
I spent a lil over 2500 on this i have receipts for everything .. solddd.
~MSD digital 6 box, msd distributor cap, msd external coil(the new model not the shity old style canister), and ill include the button for the 2step.. 200
~New Bseries Skunk 2 pro3's with Endyne Cam gears,(neva had the chance to intall)... SOld!!!!!!!!
~Latest Version Rmf headers already heat wrapped...Sold
~Rc 440 obd1 injectors..Sold
Tato Built
Located Union City,nj 07087
built type-r tranz.. soldd!!!!!
~Type R shift linkage with chrome shifter..100 obo
~obd 1 aem in box with cable,Model # 30-1000..still has warranty wit aem...pm me with a decent offer
~ACT stage 5, ,extreme pressure plate and six puck sprung and oem shaved type r flywheel..paid 550 for it ..only has 7 passes on the track..askn 350 obo
~bseries.after market mounts for eg or teg..sold
~bseries starter..40obo
~2 sets of bseries stock axle's..70 (sets only)
~bseries midshaft..best offer
~beseries rear tranny T bracket..for eg or teg..best offer
~specs..
84.5 mm,decked,hot tanked,cleaned in and out
12.5 Cp light weight pistons
Golden eagle rods
Acl race bearings, whole bottom end
89mm new ls crank
Gates timing belt
New timing tensioner
Unorthodox racing crank pulley
ls water pump
Shimmed Type-r oil pump
obd 1 alternator
oem oilpan
all gaskets are from honda dealer
ill also include the head gasket which is still fresh,but i personally would change it..
I spent a lil over 2500 on this i have receipts for everything .. solddd.
~MSD digital 6 box, msd distributor cap, msd external coil(the new model not the shity old style canister), and ill include the button for the 2step.. 200
~New Bseries Skunk 2 pro3's with Endyne Cam gears,(neva had the chance to intall)... SOld!!!!!!!!
~Latest Version Rmf headers already heat wrapped...Sold
~Rc 440 obd1 injectors..Sold
Tato Built
Last edited by KrazyLuEg8; 11-09-2009 at 08:47 AM.
11-02-2009, 07:17 PM
#25
Honda-Tech Member
Join Date: Nov 2006
Location: New York, NY
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Re: November FS Sticky
LOCATION: Long Island
asking $500
Greg
pm for pics if needed... its a p30 with a brand new s300, will provide ANY base map for free..
pm me for details
asking $500
asking $500
Greg
pm for pics if needed... its a p30 with a brand new s300, will provide ANY base map for free..
pm me for details
asking $500
Last edited by boostedcivicsir; 10-12-2010 at 01:21 AM.