How tight to tighten lug nuts on wheels??
How tight to tighten lug nuts on wheels??
09-23-2009, 04:44 PM
#2
Honda-Tech Member
Join Date: Aug 2009
Location: RENO, NV
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
you heard wrong. tighten them til you can't tighten them anymore by hand. if you're using air, tighten them til the gun stops.
09-23-2009, 04:59 PM
#4
Honda-Tech Member
Join Date: Jun 2005
Location: Berlin, PA, US
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
85 lb/ft
and yes it can warp your rotors by over torquing. You heard right
09-23-2009, 05:06 PM
#6
Pirate General...YARRRR
Join Date: Jun 2004
Location: Kills, United States
Posts: 12,355
Likes: 0
Received 2 Likes
on
2 Posts
Re: How tight to tighten lug nuts on wheels??
It's 80-85, you may or may not need to adapt a few ft lbs for aftermarket wheels.
Yes lugs can be over torqued.
I'm a bit of a retentive man when it comes to this and I will not use a gun it's hand then torque wrench.
Yes lugs can be over torqued.
I'm a bit of a retentive man when it comes to this and I will not use a gun it's hand then torque wrench.
Trending Topics
09-23-2009, 05:11 PM
#8
Honda-Tech Member
Re: How tight to tighten lug nuts on wheels??
they should be tight, (80-85 ft/lbs ^), but i dont think i would say till you cant do it anymore by hand. if you're using a 1/2" ratchet then that might be about right. if you're using a 4-way however you could very well break off one of the studs. also, not all air guns are the same. setting the impact gun to its highest setting might not be advisable.
09-23-2009, 05:22 PM
#9
Honda-Tech Member
09-23-2009, 05:49 PM
#10
Honda-Tech Member
Join Date: Dec 2005
Location: Kent Island, MD
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
I use whatever. Sometimes a 3/8 socketwrench, sometimes a 1/2 impact. It's not like I sit there and hammer it down on the impact, only takes a split second or so.
But I never tighten mine too much, there's no reason to. I hate taking others off that are torqued down like crazy. Never had a problem w/ mine comming lose from the cheapest lug nuts available, to expensive ones, from stock steelies to aftermarket aluminum wheels.
People tent to over torque things thinking that it's going to fall off if they don't. It's like hearing about people snapping or stripping bolts/threads on their valve covers when they can be tightened down with your fingers basically. I personally use a screwdriver w/ 10mm socket on it to do mine just so i never do that ;x
But I never tighten mine too much, there's no reason to. I hate taking others off that are torqued down like crazy. Never had a problem w/ mine comming lose from the cheapest lug nuts available, to expensive ones, from stock steelies to aftermarket aluminum wheels.
People tent to over torque things thinking that it's going to fall off if they don't. It's like hearing about people snapping or stripping bolts/threads on their valve covers when they can be tightened down with your fingers basically. I personally use a screwdriver w/ 10mm socket on it to do mine just so i never do that ;x
09-23-2009, 07:42 PM
#11
Honda-Tech Member
Join Date: Aug 2009
Location: new orleans, louisiana
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
^ w3rd. you can overtighten your lugnuts, but you gotta be a real "musle man". with the right tools you dont have to worry. use an eletric impact and let it max for a couple seconds. really, its not that big of a deal when using good tools.
or if youre tightening lug nuts with a torque wrench, just use standard specs. its kind of a simple theory..
or if youre tightening lug nuts with a torque wrench, just use standard specs. its kind of a simple theory..
09-23-2009, 09:59 PM
#15
B*a*n*n*e*d
Join Date: Jul 2007
Location: Many place. Why tell you?
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
yeah thats the spec most people go by. Honda does about 100 ft lbs. Gray torque stick
seen it MANY times. it sucks!
yup. lol if people have rotas then yes, they NEED to me over torqued haha
09-23-2009, 10:07 PM
#17
B*a*n*n*e*d
Join Date: Jul 2007
Location: Many place. Why tell you?
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
^It was a joke lol I dont like rota's very much. When I was in high school 2 years ago every kid and their moms had rotas. I thought the 17's and 18's where annoying till this stage. lol
09-23-2009, 10:11 PM
#18
Pirate General...YARRRR
Join Date: Jun 2004
Location: Kills, United States
Posts: 12,355
Likes: 0
Received 2 Likes
on
2 Posts
Re: How tight to tighten lug nuts on wheels??
Oh.
I had hoped you'd be able to solve the mystery of why some aftermarket wheels request a different torquing.
I had hoped you'd be able to solve the mystery of why some aftermarket wheels request a different torquing.
09-23-2009, 10:15 PM
#19
B*a*n*n*e*d
Join Date: Jul 2007
Location: Many place. Why tell you?
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
well the torque value depends on the stud and nuts strength mainly. but when the wheel is a different material (IE Aluminum) it tends to need less as when the rotor heats up the heat passes into the wheel. heat will soften the rim meaning you can actually warp the wheel if the studs are too tight. I know there is more info on this than my $.02 worth
09-23-2009, 10:17 PM
#20
Pirate General...YARRRR
Join Date: Jun 2004
Location: Kills, United States
Posts: 12,355
Likes: 0
Received 2 Likes
on
2 Posts
Re: How tight to tighten lug nuts on wheels??
That's what I assumed but a few cars I've had the aftermarket rims made sure to note using MORE ft lbs then OEM.
That's what I'm rather perplexed about.
That's what I'm rather perplexed about.
09-23-2009, 10:19 PM
#21
B*a*n*n*e*d
Join Date: Jul 2007
Location: Many place. Why tell you?
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
hmmm...i never really see MORE than OEM. maybe its so the weakling thiefs out there cant steal the rims?
09-23-2009, 10:27 PM
#23
B*a*n*n*e*d
Join Date: Jul 2007
Location: Many place. Why tell you?
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
lol
I know that Blox extended studs need less from what I remember. Not sure if its just cause they are POS studs and break fast, or something else
I know that Blox extended studs need less from what I remember. Not sure if its just cause they are POS studs and break fast, or something else
09-24-2009, 12:55 AM
#24
Honda-Tech Member
Join Date: Jan 2009
Location: thomasville, ga
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
09-24-2009, 06:43 AM
#25
Honda-Tech Member
Join Date: Sep 2008
Posts: 1,095
Likes: 0
Received 0 Likes
on
0 Posts
Re: How tight to tighten lug nuts on wheels??
some manufactures recommend cheking the tourque after 20 miles on aluminom wheels
