How do you replace power steering belt 94 accord?
#3
Honda-Tech Member
Join Date: Apr 2004
Location: Buckeye Country, United States
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you replace power steering belt 94 accord?
Remember when you used to ride bikes and the chain would come off? Same concept here. Put belt around one pulley, and then start it around the bigger pulley. Crank engine over for a second and belt should go on no problems.
#6
Honda-Tech Member
Join Date: Jan 2009
Location: Western Australia
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you replace power steering belt 94 accord?
As said loosen the pivot bolt and the tensioner bolt, should be around 3 bolts. Push it to the most slackest setting, take off old belt, put new one on. DO NOT CRANK THE MOTOR TO PUT THE BELT ON IT SHOULD JUST FIT ON THE SLACKEST SETTING.
Check tension by pressing the belt between the two pulleys, it shouldn't deflect more than half an inch.
Check tension by pressing the belt between the two pulleys, it shouldn't deflect more than half an inch.
Thread
Thread Starter
Forum
Replies
Last Post
jcinwelland
Honda Accord (1990 - 2002)
2
03-04-2009 09:42 PM