crank pulley torque specs

Reply Subscribe

Thread Tools

Search this Thread

01-03-2009, 02:36 PM

hspoon

Junior Member

Thread Starter

Join Date: May 2006

Location: Houston, tx, usa

Posts: 171

Likes: 0

Received 0 Likes on 0 Posts

crank pulley torque specs

what's the torque spec for cranck pulley for b18b1

Thanks in advance

Reply Like

01-03-2009, 02:39 PM

mouab18c1

Honda-Tech Member

iTrader: (5)

Join Date: Aug 2006

Location: Washington

Posts: 8,071

Likes: 0

Received 4 Likes on 4 Posts

Re: help needed asap

at least 85lbs...my gsr is torqued at 85lbs...start with 25 then go to 50 and then 80....

Reply Like

01-03-2009, 03:59 PM

hspoon

Junior Member

Thread Starter

Join Date: May 2006

Location: Houston, tx, usa

Posts: 171

Likes: 0

Received 0 Likes on 0 Posts

Re: help needed asap

thanks

Reply Like

01-03-2009, 04:10 PM

Jimmy

Global Moderator

iTrader: (5)

Join Date: Jan 2003

Location: Tennessee

Posts: 12,498

Likes: 1

Received 2 Likes on 2 Posts

Re: help needed asap

my service manual says 130 ft-lbs for the crank pulley bolt.

Reply Like

01-03-2009, 04:32 PM

mouab18c1

Honda-Tech Member

iTrader: (5)

Join Date: Aug 2006

Location: Washington

Posts: 8,071

Likes: 0

Received 4 Likes on 4 Posts

Re: help needed asap

Quote:

Originally Posted by Jimmy

my service manual says 130 ft-lbs for the crank pulley bolt.

thats right...but mines at 85+lbs...it'll tightened up as it goes...

Reply Like

01-03-2009, 04:32 PM

steveo135

Honda-Tech Member

Join Date: Feb 2007

Location: Preventing rust on the East Coast!!11!

Posts: 1,010

Likes: 0

Received 0 Likes on 0 Posts

Re: help needed asap

Quote:

Originally Posted by Jimmy

my service manual says 130 ft-lbs for the crank pulley bolt.

werd jimmy

breaking that bolt loose for the first time can be a bish

Reply Like

01-03-2009, 04:35 PM

Jimmy

Global Moderator

iTrader: (5)

Join Date: Jan 2003

Location: Tennessee

Posts: 12,498

Likes: 1

Received 2 Likes on 2 Posts

Re: help needed asap

Quote:

Originally Posted by steveo135

werd jimmy

breaking that bolt loose for the first time can be a bish

my lord.. yes it can be a bish

steveeeeooo

Reply Like

Trending Topics

B17 Darton turbo blown headgasket

3

148
ICU (Integrated Control Unit)

18

18.1k
Turbo kit for 350HP?

3

121
Piston order (d16y8)

2

132
Shifts hard after installing used transmission

2

59

01-03-2009, 04:38 PM

mouab18c1

Honda-Tech Member

iTrader: (5)

Join Date: Aug 2006

Location: Washington

Posts: 8,071

Likes: 0

Received 4 Likes on 4 Posts

Re: help needed asap

Quote:

Originally Posted by Jimmy

my lord.. yes it can be a bish

steveeeeooo

thats why theres tire shops with impact guns to break em loose....

at no COST

Reply Like

01-03-2009, 04:49 PM

Jimmy

Global Moderator

iTrader: (5)

Join Date: Jan 2003

Location: Tennessee

Posts: 12,498

Likes: 1

Received 2 Likes on 2 Posts

Re: help needed asap

Quote:

Originally Posted by mouab18c1

thats why theres tire shops with impact guns to break em loose....

at no COST

Why not do it yourself with your own air compressor/impact?

Reply Like

07-06-2010, 03:43 PM

#10

CRXguy_88

Honda-Tech Member

iTrader: (7)

Join Date: Mar 2009

Location: KANSAS

Posts: 473

Likes: 0

Received 0 Likes on 0 Posts

Re: help needed asap

Quote:

Originally Posted by steveo135

breaking that bolt loose for the first time can be a bish

I know this threads old but.. OMG that bolt was a bitch to get off. my friends impact couldnt get it off, wet to my local tire shop and boom it came off.. for free too! It was not as bad as the bitch pin though, but close.. but i figured out the easiest way to get that off garanteed!!!

Reply Like

06-25-2016, 09:40 AM

#11

tealteggsr

Honda-Tech Member

Join Date: Jun 2016

Posts: 4

Likes: 0

Received 0 Likes on 0 Posts

Re: crank pulley torque specs

Lol I didn't even use an impact! I took parachute strap tied in a sinch knot wrapped it around a couple of times tied it to the tow hook and broke I loose with a rachet less than 3 minutes!