how to replace ignition lock cylinder
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Spokane, WA, USA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
how to replace ignition lock cylinder
I have a 91 EX Accord Station Wagon and need to change the ignition lock cylinder. Can anyone provide instructions for this?
Thanks
Thanks
#2
Member
Re: how to replace ignition lock cylinder
First remove the steering column shroud; screws are underneath.
Unplug the switch;
Then the "collar" of the lock cylinder has breakaway bolts holding it to the column.
You can use a small chisel on the edge of the breakaway head to get it backing out.
The service manual calls for the bolts to be drilled out.
Then swap over the electrical part of the switch to the new cylinder.
re-assemble everything and go flag your 3/10s of an hour.
Unplug the switch;
Then the "collar" of the lock cylinder has breakaway bolts holding it to the column.
You can use a small chisel on the edge of the breakaway head to get it backing out.
The service manual calls for the bolts to be drilled out.
Then swap over the electrical part of the switch to the new cylinder.
re-assemble everything and go flag your 3/10s of an hour.
#3
SHAME ON YOU REBECCA!
Join Date: Mar 2007
Location: My house.
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to replace ignition lock cylinder
First remove the steering column shroud; screws are underneath.
Unplug the switch;
Then the "collar" of the lock cylinder has breakaway bolts holding it to the column.
You can use a small chisel on the edge of the breakaway head to get it backing out.
The service manual calls for the bolts to be drilled out.
Then swap over the electrical part of the switch to the new cylinder.
re-assemble everything and go flag your 3/10s of an hour.
Unplug the switch;
Then the "collar" of the lock cylinder has breakaway bolts holding it to the column.
You can use a small chisel on the edge of the breakaway head to get it backing out.
The service manual calls for the bolts to be drilled out.
Then swap over the electrical part of the switch to the new cylinder.
re-assemble everything and go flag your 3/10s of an hour.
Thread
Thread Starter
Forum
Replies
Last Post
pendejon
Honda CRX / EF Civic (1988 - 1991)
11
11-23-2016 09:34 PM
Bishop1976
Honda CRX / EF Civic (1988 - 1991)
3
09-29-2012 08:48 AM
bsclywilly
Audio / Security / Video
3
06-02-2007 08:33 AM