EgK2o09

I just purchased a sohc f22b. When i went to go hook up the harness, the IAC sensor is in the back of the intake manifold. The old motor the IAC sensor in on the right side of the intake manifold. They are 2 different sensors( the old motor the sensor is held in by 2 screws, and the new f22b is just in the back of the intake manifold) Where can i find the replacment IAC sensor for the JDM f22b?

itslogz

IAC as in idle air control or IAT as in intake air temp?

IAT....

http://www.hondaautomotiveparts.com/...NTAKE+MANIFOLD


Go to that and scroll down in the list to INTAKE MANIFOLD then its #26 $11.48... Its #28 in the picture but listed as 26.

EgK2o09

sorry... its the IAT sensor. But thats not the right sensor, the sensor i need goes right into the back of the manifold. Thank you for your help!!

GhostAccord

I'm pretty sure all the F22Bs use the direct fit IAT sensor in the back of the plenum. You can use a sensor from the F22B1 or 2.

EgK2o09

the old intake manifold off the f22b1 is on the right side of the intake manifold if your looking at the motor(the sensor is held in by 2 screws). my new motor f22b its directly in the back of the intake manifold if u were looking at the motor( the sensor just screws in the intake manifold) the sensor has its own threads. thank you! http://cgi.ebay.com/ebaymotors/ws/eB...m=390006887548 looks like that.

GhostAccord

What year F22 are you refering to? Both the 94 F22B1 and the 96 F22B2 intake manifolds that I have had in my hands had the screw in type IAT sensor.

Here is the pic of the 94 F22B1 before I cut it up for my ITBs, as you can see it has the screw in type IAT on the rear of the IM.



and here is a pic of the 96 F22B2 intake manifold with the runners removed.




The Honda Air Temperature Sensor Assembly (aka IAT) part number for the 94-97 USDM F22B1 & 2s is 37880-P0A-A02. No change in part number for any of the I4 5th gens.

Your welcome!

EgK2o09

Once again bro Thanks so much!! by the way merry christmas. And if i ever have any other questions do u mind if i just pm u, because u seem too know the answers to all my questions. Thanks! Kyle

GhostAccord

No problem,...

PM me any time, that's what it's there for. Ask away and I'll help if I can.

Cheers
& Happy Holiday