Cam Gear weight: AEM vs. Skunk2
12-10-2002, 10:25 PM
#1
Member
Thread Starter
Cam Gear weight: AEM vs. Skunk2
For inquiring minds that want to know, Skunk2 cam gears are lighter than AEM cam gears.
I have both of them right here the AEM is defintely heavier. You can pretty much already tell because the skunk2 a smaller internal piece, but anyways it's lighter so I expect it spins better freeing up hp!
Every little bit helps
[Modified by satan_srv, 2:25 AM 12/11/2002]
I have both of them right here the AEM is defintely heavier. You can pretty much already tell because the skunk2 a smaller internal piece, but anyways it's lighter so I expect it spins better freeing up hp!
Every little bit helps
[Modified by satan_srv, 2:25 AM 12/11/2002]
12-11-2002, 10:21 AM
#2
Member
Join Date: Feb 2002
Location: NH, USA
Posts: 1,645
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
Skunk2 cam gears are really nice especially when you consider they can be had for under $200 shipped if you look around. I doubt you'll notice a difference from the weight though even with oem cam gears.
12-11-2002, 10:46 AM
#3
Honda-Tech Member
Join Date: Sep 2002
Posts: 3,229
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
Every little bit helps
[Modified by satan_srv, 2:25 AM 12/11/2002]
it's the same concept as lightweight wheels...rotating mass has a big impact when you consider weight.
12-11-2002, 10:56 AM
#4
Member
Thread Starter
Re: Cam Gear weight: AEM vs. Skunk2 (dsludefosho)
I'm gonna guess the stock gears are even heavier....I was surprised at the difference between the AEM and Skunk2...
Skunk2 gears plus my super strong belt = one badass rotating assembly!
Skunk2 gears plus my super strong belt = one badass rotating assembly!
12-11-2002, 04:03 PM
#5
Join Date: Nov 2002
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
just out of curiosity....what belt are you running satan?....ive only heard of one belt for an h series motor besides the oem belt....and im curious to hear if you have any -/+ feedback on it. thanks
12-11-2002, 05:42 PM
#6
Honda-Tech Member
Join Date: Dec 2001
Location: L.A.
Posts: 3,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
i got SKUNK2 cam gears on my car. just installed them last week. i have to tune them though...
do you guys have clearance issues? mine rub somewhere making this whistle-like sound. people think i have a supercharger... i removed the top cover, but from what i hear i need to remove the bottom one as well. is this true? if so, i got a project to do this weekend.
do you guys have clearance issues? mine rub somewhere making this whistle-like sound. people think i have a supercharger... i removed the top cover, but from what i hear i need to remove the bottom one as well. is this true? if so, i got a project to do this weekend.
12-11-2002, 06:33 PM
#7
Member
Thread Starter
Re: Cam Gear weight: AEM vs. Skunk2 (Tb Fivel)
just out of curiosity....what belt are you running satan?....ive only heard of one belt for an h series motor besides the oem belt....and im curious to hear if you have any -/+ feedback on it. thanks
Trending Topics
12-11-2002, 06:51 PM
#9
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
the skunk 2's are still lighter then the new aem ones. my girl has aem, i have skunk 2.
to the guy who was rubbing, did you take the cover between the cam gears and the head off?
to the guy who was rubbing, did you take the cover between the cam gears and the head off?
12-11-2002, 07:41 PM
#10
Join Date: Nov 2002
Location: Modelrator
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
While we are on the subject of cam gears, i was thinking of getting some AEM's but one of my friends told me that they can do more harm than good on your engine by decreasing the engine life is this true?
12-11-2002, 10:07 PM
#11
Honda-Tech Member
Join Date: Dec 2001
Location: L.A.
Posts: 3,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (fastludeh22)
to the guy who was rubbing, did you take the cover between the cam gears and the head off?
12-11-2002, 10:40 PM
#12
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (BB1)
oh, when you said bottom, i was thinking lower, as in the one near the crank pully. if i was you, i would just cut the one behind the gears off. screw taking the timing belt off to get that out.
12-12-2002, 12:02 AM
#14
Honda-Tech Member
Join Date: Dec 2001
Location: L.A.
Posts: 3,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (fastludeh22)
oh, when you said bottom, i was thinking lower, as in the one near the crank pully. if i was you, i would just cut the one behind the gears off. screw taking the timing belt off to get that out.
12-12-2002, 05:28 AM
#15
Member
Join Date: Apr 2001
Location: NYC, NY/NJ
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (BB1)
used to run skunk2's on my h22a about 2 years ago. i personally didn't like the the actual quality of the gears.
str used to have the best ones in my opinion.
str used to have the best ones in my opinion.
12-12-2002, 05:51 AM
#16
Member
Thread Starter
Re: Cam Gear weight: AEM vs. Skunk2 (dustywebber)
Im ordering some cam gears for my F22A1 here shortly...
I think ill go skunk2...
but really how much HP will you gain?
I think ill go skunk2...
but really how much HP will you gain?
12-12-2002, 07:06 AM
#17
Honda-Tech Member
Join Date: May 2002
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Gear weight: AEM vs. Skunk2 (satan_srv)
Ive always heard horror stories about the AEM cam gear because it only has 3 bolts and can slip, whereas the skunk2 cam gear has 6 i believe.
10-06-2003, 04:02 AM
#20
Member
Thread Starter
Re: Cam Gear weight: AEM vs. Skunk2 (preludeprojex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by preludeprojex »</TD></TR><TR><TD CLASS="quote">whats the installation cost on cam gears (average?)</TD></TR></TABLE>
whoa old school post. Usually cam gears are installed with new cams, so whatever a cam install costs cam gears are usually included.
whoa old school post. Usually cam gears are installed with new cams, so whatever a cam install costs cam gears are usually included.
10-06-2003, 02:09 PM
#23
Honda-Tech Member
Join Date: Feb 2003
Location: Reading, PA, US
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
10-06-2003, 02:23 PM
#24
Honda-Tech Member
Re: (19924ws)
I had 3 to compare... the h22a skunk2 i had were extremly lighter than aem... also to fit the new style skunk2 you need to grind the plastic part of the cover.. (the half moon to clear, because the bolt is exactly the lenght needed to fit.. so when you clear the spacing you actually go through the plastic.. here is a pic to compare..
look at the plastic cover...
this is my h22a built motor for my ek, mind you the headers different,so is the intake and other things
More PoWA!
ahhaah
look at the plastic cover...
this is my h22a built motor for my ek, mind you the headers different,so is the intake and other things
More PoWA!
ahhaah
