d2 coilover height adjustment
09-29-2008, 11:18 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2007
Location: stoughton, wi, usa
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
d2 coilover height adjustment
if ne one can give me a pretty detailed description on how to height adjust d2 coilovers id highly appreciate it 
10-02-2008, 09:14 AM
#3
Honda-Tech Member
Join Date: Dec 2005
Location: Philly suburb, PA, USA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Re: d2 coilover height adjustment (shortbuss90)
If you own them, there should be instructions...
Basically, you should adjust the height using the bottom mounts of the coilovers, NEVER by using the bottom spring perch. That should be tightened just enough to hold the spring in there and not allow any movement. There will be a locking collar that's screwed against the bottom mount, so loosen that and turn the mount one way or the other to raise or lower it. Also make sure that only the bottom mount is turning when you're adjusting it.
I'd recommend counting how many turns you adjust each one so you can change everything evenly left/right and front/rear (if the car is level as it is).
Basically, you should adjust the height using the bottom mounts of the coilovers, NEVER by using the bottom spring perch. That should be tightened just enough to hold the spring in there and not allow any movement. There will be a locking collar that's screwed against the bottom mount, so loosen that and turn the mount one way or the other to raise or lower it. Also make sure that only the bottom mount is turning when you're adjusting it.
I'd recommend counting how many turns you adjust each one so you can change everything evenly left/right and front/rear (if the car is level as it is).
Thread
Thread Starter
Forum
Replies
Last Post
kaluwa3
Suspension & Brakes
2
05-13-2007 03:39 PM
JDMlyfestyle
Suspension & Brakes
3
08-15-2005 08:17 PM
