obd-0 to 0bd-1
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: SO, CAL
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
obd-0 to 0bd-1
Hey guys,
I need to convert to OBD1. I am running a stock D16A and i know i have to change to a 4 wire 02 sensor but i dont know what type of distributor i need. I have read so many different suggestions but they all contradict each other. I is hust a obd0 D16A non-vtec head. Which obd1 dizzy would fit. The reason i am going to go to obd1 is to run a Hondata.
Any help?
I need to convert to OBD1. I am running a stock D16A and i know i have to change to a 4 wire 02 sensor but i dont know what type of distributor i need. I have read so many different suggestions but they all contradict each other. I is hust a obd0 D16A non-vtec head. Which obd1 dizzy would fit. The reason i am going to go to obd1 is to run a Hondata.
Any help?
#2
Honda-Tech Member
Re: obd-0 to 0bd-1 (crxH4)
the distributor that you need is a TD-41U or TD-42U.
TD-41U found on DX, LX civics from 92-95
TD-42U found on EX, Si civics from 92-95
it all depends on what your set up is going to be. if your stayin non vtec you can use a TD-41U but it might not bolt up to your current motor. i know when i did a mini me i had to modify the ears to bolt up to my old D16A6 bottom and D16Z6 head.
TD-41U found on DX, LX civics from 92-95
TD-42U found on EX, Si civics from 92-95
it all depends on what your set up is going to be. if your stayin non vtec you can use a TD-41U but it might not bolt up to your current motor. i know when i did a mini me i had to modify the ears to bolt up to my old D16A6 bottom and D16Z6 head.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: SO, CAL
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd-0 to 0bd-1 (crx_si-r)
thanks for the info!
i am going to keep the engine stock with the D16A head.
anyone got one of those distributors laying around or know where i can get one.
i am going to keep the engine stock with the D16A head.
anyone got one of those distributors laying around or know where i can get one.
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: SO, CAL
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd-0 to 0bd-1 (crxH4)
another questions,
The Td-41U says it is for the 1.5L . Is it ok to run on the 1.6L. or what about the TD42U that is for Vtec engines. Is that ok to have even if im not running vtec
The Td-41U says it is for the 1.5L . Is it ok to run on the 1.6L. or what about the TD42U that is for Vtec engines. Is that ok to have even if im not running vtec
#6
Honda-Tech Member
Join Date: Jan 2008
Location: albuquerque, NM, USA
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post