BRAICH BUILT A/M H2B Build
08-05-2008, 02:28 PM
#1
BRAICH BUILT A/M H2B Build
The old B20 vtec 232hp159tq
the new 89x95 h22
just need my magnus motorsports intake manifold and then to the dyno..
Modified by JDM JEFFREY at 12:08 PM 8/6/2008
the new 89x95 h22
just need my magnus motorsports intake manifold and then to the dyno..
Modified by JDM JEFFREY at 12:08 PM 8/6/2008
Last edited by JDM JEFFREY; 01-10-2010 at 07:34 PM.
08-05-2008, 07:08 PM
#6
Re: my h2b build (2fastGSR)
the set up is
h22 block
h23 crank
h22 pistons
egale rods
cc ported head
bloxs bs
magnus intake mani
ssr header..
the block is a loner block from PED..well mine gets built..
my block is a h22a4 ge sleeves
97 f23 crank 90 bore
12.5 comp
Trending Topics
08-05-2008, 07:25 PM
#8
King of the One Liners
Re: my h2b build (JDM JEFFREY)
Sounds pretty killer man. PED puts out some rad builds.
Rebuild is going well. Bigger and badder is the name of the game . .
thanks for asking though
Rebuild is going well. Bigger and badder is the name of the game . .
thanks for asking though
08-06-2008, 01:16 PM
#10
Honda-Tech Member
Join Date: Feb 2008
Location: CA, USA
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Re: my h2b build (JDM JEFFREY)
damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!
08-06-2008, 07:44 PM
#17
Honda-Tech Member
Re: my h2b build (88ED8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 »</TD></TR><TR><TD CLASS="quote">It's the QSD logo and part number.</TD></TR></TABLE>
Mine doesnt have that
Mine doesnt have that
08-06-2008, 07:55 PM
#18
Honda-Tech Member
Re: my h2b build (SIXTY)
I guess only the "new" plates have it since there wasn't always a part number for the QSD plates..... They also have a EK instead of a CRX CNCed on them!
I want a new plate with a CRX on it
!!!...
I want a new plate with a CRX on it
!!!...
08-06-2008, 08:28 PM
#19
Re: my h2b build (88ED8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcem1 »</TD></TR><TR><TD CLASS="quote">damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!</TD></TR></TABLE>
the k20 ek was my homies car..
the same motor in the ped car went 11.5<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTY »</TD></TR><TR><TD CLASS="quote">Is that a qsd plate? Whats that writing on the top?</TD></TR></TABLE>
ya its the new qsd kit
.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 »</TD></TR><TR><TD CLASS="quote">nice, like the shaved vc letters
Any pics of the magnus intake mani???
</TD></TR></TABLE>
the mani will be there on friday
the k20 ek was my homies car..
the same motor in the ped car went 11.5<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTY »</TD></TR><TR><TD CLASS="quote">Is that a qsd plate? Whats that writing on the top?</TD></TR></TABLE>
ya its the new qsd kit
.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 »</TD></TR><TR><TD CLASS="quote">nice, like the shaved vc letters
Any pics of the magnus intake mani???
</TD></TR></TABLE>
the mani will be there on friday
Last edited by JDM JEFFREY; 03-29-2010 at 11:36 PM.
08-06-2008, 09:36 PM
#20
Re: my h2b build (JDM JEFFREY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Linh. »</TD></TR><TR><TD CLASS="quote">any pictures of frame rail to crank pulley clearance?</TD></TR></TABLE>
the PED 6 point cage..
back side
the PED 6 point cage..
back side
Last edited by JDM JEFFREY; 12-30-2008 at 09:09 PM.
08-06-2008, 09:55 PM
#21
Honda-Tech Member
Re: my h2b build (JDM JEFFREY)
Nice seats!!
If I were you, I'd loop the heater lines together instead of useing those rubber caps with clamps, mine started to leak over time...
If I were you, I'd loop the heater lines together instead of useing those rubber caps with clamps, mine started to leak over time...
08-07-2008, 06:26 AM
#23
King of the One Liners
Re: my h2b build (JDM JEFFREY)
ahh thats just excessive weight. . . . I capped mine, just make sure they are the thick caps and you hose clamp them and you should be fine. . .
I bought an extra set and bring them to the track with me. I mean they are only 3 bucks haha
Weight savings FTW . . .
It really does sound like a killer build man. Now i know what it was like for everyone watching my thread, i am excited to see this thing rip ! haha
I bought an extra set and bring them to the track with me. I mean they are only 3 bucks haha
Weight savings FTW . . .
It really does sound like a killer build man. Now i know what it was like for everyone watching my thread, i am excited to see this thing rip ! haha
08-07-2008, 04:30 PM
#24
Re: my h2b build (2fastGSR)
thanks..
ya i have the thick caps..so ill try them out..
I cant wait for it to be done..I called magnus today to get my tracking number,and they said they sold my mani to someone else..so one more week..I hope..
ya i have the thick caps..so ill try them out..
I cant wait for it to be done..I called magnus today to get my tracking number,and they said they sold my mani to someone else..so one more week..I hope..
